Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

AExx Corolla Discussion

  1. Started by SoulSearcher,

    Ok, everyone would know by my previous posts that I've had a fair bit of mechanical trouble with my pride and joy. Well finally I cracked the sh*ts, requested that a mechanic come for a drive and listen to my car and the results are as follows: On an oil consumption test over 1000 klms, my car used 1.6lt of oil. Yep, one point six litres! The noise that they heard was piston slap The compression test they did showed that cyl number 4 was the problem. They did wet and dry testing (still not sure what that is) and it was bad They took the head off and there was damage in cyl number 4 (as was expected). So, they have the car for a month, and I'm get…

    • 49 replies
    • 57.8k views
  2. Started by DARKMAZE,

    Well, we got the engine out, new clutch in, and put everything back into the car... Tried to start it up last night, but get no dice.. Ignition on puts the lights on the dash, but when I put the key to start, all that happens is the brake light comes on. No noises. No movement. Now, I did happen to break a wire or two in the engine removal process (whoops), but being a 4ac, we kinda figured it wouldn't be all that hard to figure out. There is a crappy kill switch type immobiliser on the car that I have a feeling may be causing the issue, so I was hoping that someone might happen to have access to a wiring diagram that might help in our endeavour to get the thing…

    • 4 replies
    • 5.2k views
  3. Started by lammi,

    The stupid plastic dash bit above has cracked on my car, as well as many other ae82's i've seen, ive been to a heap of wreckers but they ALL seem to be cracked. does anyone have plans of doing a custom one up, because i (and I'm sure alot of other people) would be very interested in it. was thinking of putting a bit of brushed aluminium on there but realized the glare would kill my eyesight. its this bit here just for higher reference.

  4. Started by taterphakes,

    Hi, I have a 88 4wd wagon, sometimes when i change to reverse it wont go in properly, just like it stays in neutral. when i change back up to 1st then reverse again it works. Also sometimes when slowing down in 2nd there is like a thump noise. Any ideas?? Thank you

    • 16 replies
    • 5.4k views
  5. Started by wagon,

    went today to get a gearbox for my 4 agte, the guy said he had one out of an ae71 but it was a 4 speed i saw the box and motor it was a 4a, has any heard of these and how strong and if i can use it and also if i would have to change clutch or tailshaft or anything?

    • 2 replies
    • 2.2k views
  6. Hi All, I am a subaru man myself, but my other half drives a 1990 corolla hatch. AE90 i think, carby engine. I love this little car, apart from replacing the brushes in the alternator i have never had to do any more than regular servicing on it. The car has started to develop a really loud road noise that starts at about 80kph and gets really bad at 100kph. It sounds like wheel bearings to me, however before i go pulling the rear end apart i thought i would ask if there are any other common problems i should look at? The rear drums are in bad need of machining and new shoes, so i am planning to pull the rear end apart and have the brakes done up, and new bear…

    • 3 replies
    • 2.9k views
  7. Started by hym stryker,

    got any idea to upgrades the AE80 to the maximum performances without changing the original engine... just would like to install other performance parts...

    • 1 reply
    • 1.6k views
  8. Started by AE71Wagon,

    IN short of making my own which is still a option. is there a supplier of such items for these cars ?

    • 4 replies
    • 2.7k views
  9. Started by superbmobile,

    i have a annoying problem with the alternator the damn thing doesnt seem to be charging i have replaced the alternator and the wiring loom and still the charge light continues to stay on and the battery drains dead. ive tried various solutions like changing fuses and another brand new battery and still nothing. CHEERS.

  10. Started by Fat Bastard Customs,

    does anybody know where i could get some late model sprinter (kouki) axles from, and for how much?

  11. Started by Jason,

    What torque do i need to bolt the caliper to the strut? Hilux caliper > XT130 Strut also do i need washer for the bolts or spring washers? J

    • 19 replies
    • 7.3k views
  12. Started by superbmobile,

    just wondering what carbys fit to ae71's. CHEERS.

    • 5 replies
    • 2.7k views
  13. Started by Des,

    What is this. Came out of my ae71 wagon and it was strapped to the heater crap under the dash.

    • 3 replies
    • 2.8k views
  14. Started by SoulSearcher,

    Ok, I'm planning on some work to broomdie, and I want to paint the calipers... Q: how difficult would it be (for someone like me who doesn't know what they're doing) to paint them? If I can't do it, who COULD do it?? secondly I want to get the air intake housing that goes all around the inside of the engine bay chromed and the joints in that coloured neoprene stuff (or what ever it is - can some one tell me?) Q: would the difference between the existing piping and the chrome piping make a difference temperature wise and if not who would I go to get something like that done??? Thank you Lesley :P

    • 13 replies
    • 3.3k views
  15. Started by hobart_ae92,

    howdy, i've tracked down the brakes that i'm getting but i just wanna make sure that i get the best price. i'm hoping someone who reads this will have some experience or know what these should cost me, also it'd be great if you could even just point me in the right direction for where to find them... brakes are from a late model AE92 SX seca/GTi ... 258mm diameter, 22mm thickness, vented disks; then also need the calipers to go with it. From what i've read it's just a straight bolt on job to replace my 238(?)mm solid disks and calipers atm. Any useful info appreciated, thanks.

    • 9 replies
    • 6.3k views
  16. Started by ROSCO,

    Hey all... I have recently purchased a ae71 csx.. manual.. 1.6 4a Turning it into a fast and mean machine... mainly for hillclimbs, motorkahnas and drifting.. I have been searching this website for ages and well, hard to find things with information etc.. Could i please get some info on suspension upgrades, such as changing the struts (brakes etc), shocks and springs.. (I would like all the suspension to be hard, lowered and fitted by xmas.. i know... but its worth a try) also what diffs are easiest to find and easiest to fit... etc.. (are there any disk to disk).. i know its a pretty vague question.. but all help in the right direction would be a…

    • 3 replies
    • 7.5k views
  17. Started by zmit,

    hey guys, AE82 SOHC carbie. 4A-C i just took it for a run around the track today (it was the last one, I'm goin on holidays for 8 weeks on wednesday so i figured why not) previous to racing it, i changed the oil and filter, checked all the plugs (didnt replace em tho) and just basically checked it over mechanically. after doing a few laps (4 or 5) it started heating up (stock standard, u kind of have to expect that) so i pulled it in. popped the bonnet and let it cool down. i noticed some oil dripping from effectively underneath the brake booster (not coming from there though) it was dripping off the mudflap. I did overfill the oil a little bit so I'm hop…

    • 9 replies
    • 3.1k views
  18. Started by GReddy_es,

    Hi all, Just got my car today..and was just wondering if any Sportivo turbo owners out there have got any BOVs on their rides?if so..which type of bov have u guys gone for? cheers

    • 26 replies
    • 30.8k views
  19. Started by ke17 20v,

    any help would be great... i have a 4age 20v with a sprinter rear wheel gearbox but no plate from the rear of the engine that bolts the gearbox and starter motor up... i was wondering if the front wheel drive plate and the rear wheel plate are the same? because i can find an original front wheel plate easily but nearly imopossible to find the sprinter rear wheel plate... any advice would be much appreciated thank you....

    • 2 replies
    • 2.6k views
  20. Started by paraphernalia,

    i bought my '90 corolla DX about 3 years ago w/130,000 miles on it, now i've got over 205,000... about 2 years ago i had an alternator go bad on me.. i didnt realize i was running off the battery until, yes it died with not even enough power to light up gauges. simple problem, hell alternators don't last forever so i didnt think anything about it. i didnt have any other problems until one really humid hot day this past summer. i was running errands with the AC on the whole time until i had the same problem as before. this time i blamed the heat because i also blew a couple fuses, the AC and oddly, my brake light fuse. this time i had to buy a new battery since it wouldnt …

  21. Started by nickxrx,

    ok i have an 86 corolla gts, i swapped motors from stock 4age to an jdm 4age, so its the same motor, and here's my problem, i went to start it up and it wouldn't crank, so we messed with the timing and finally got it running ok, but still backfiring, but i have been working on this problem for two months, i have set the timing to many times, also it won't run where the timing is suppose to be, i have to move it, just to get it to stay running, but again it misfires and backfires like the timing is off and i took pictures and posted them on another website just to make sure and the timing is right, also its has compression and new sparks plugs and wires, so if anyone could…

    • 17 replies
    • 13.8k views
  22. Started by Daniel,

    Hi Guys, i have made up my mind and I'm definately buying a ae92/3 with agze or 20valve in it. i have looked at a few VERY poor ones for sale by what i can only describe as f@$ktard$, and now I'm on the lookout for a real car. I have a question the i have googled and so forth, in the hope someone can lead me to a reasonable answer: *What are the average fuel consumption for a $agze Versus 20valve?(i know considering car/mods/etrc etc that there is a variance) I really want to know as there are currently 2 gze powered ae93's that i would swap cash for, but at the price of BP ultimate i don't want to be spending more than i already am. I understand due to the nature of f…

    • 4 replies
    • 18.9k views
  23. Started by meadan,

    hi all, i searched and couldnt seem to come up with anything which helps me, if its been discussed i apologise. but i have a non tacho ae71 cluster, and want to put a tacho in it. i have a full t18 cluster sitting around so i want to put that in instead of paying a whole load of money to get a stock one with a cluster. the question i have is, does anyone know which colour wires in the plug are the ones for the tacho? also did the wires come in the bodies which didnt have an actual tacho? (i assume they came as part of all the looms). thanks if anyone can help as it will save me trying to figure it out and testing all the wires. adan

    • 2 replies
    • 3.3k views
  24. Started by Des,

    I did a search and found nothing to help me so is the 4agze an interference engine ?

    • 21 replies
    • 32.6k views
  25. Started by alimonos,

    Anybody that could help me with the THROTTLE POSITION, HI-THROTTLE & LOW-THROTTLE settings ? I have Kamakazee cams 262 degrees 8.9mm lift with T3 adj cam gears and PACESETTER 4-1 header installed... Thanks in advance !!! :)

    • 0 replies
    • 2.9k views
  26. OK, well as you may (or not) know, my broomdie is getting a new engine, exhaust manifold, water pump and turbo (under warranty thank the big guys upstairs) and I got to thinking, since she's in bits I may as well get a new clutch. Now I do a lot of driving (I've done about 30,000 klms in the last 6 months) I do a variety, hills, freeway, city, peak hour etc,. normally I'd go performance rather than cost so I made some enquiries about brass button (I'm pretty sure that's what they're called) clutches, or whether to stick with the HD ones that came in the AE112R Sportivo Turbos. My mechanic knows the way I drive and says I'd enjoy the brass button clutch, but it wou…

  27. Started by wallrus73,

    can any 4ag.... engine go in ,cause apparently the 4afe sux and no-one knows how the get any torque out of them.

    • 12 replies
    • 9.2k views
  28. Started by zmit,

    hey guys, does anyone know about the swift gti drivetrain, eg wheelbase and track etc. and whether it would fit in an ae82? just had a strap in a heavily modified ae82 hatch and thought it would be awesome with AWD

    • 16 replies
    • 6.9k views
  29. Started by gemless,

    i have done some searchs but havnt found the answers I'm lokking for. i have a ae86 twin cam corolla with a 4age motor. I'm wanting to know if *the big port 4age twin cam is the 100kw 4age motor *are the bell housing the same for the whole 4age family (supercharged,black top, silver top) thanks brett

    • 14 replies
    • 5.4k views
  30. Started by zmit,

    just wondering how different the exhaust system would be on the liftback and the hatchback on an AE82 would i have to modify the exhaust at all? or just the end of it? (trim, bend, cut, watever) cheers, Tim

    • 4 replies
    • 4.3k views
  31. Started by jay_rolla,

    Hey I'm jay, proud owner of a 1990 AE92 corolla se running on a stock 4afc. What would be the most basic/easiest/cheap/effective mods be for a rookie such as myself? I'm thinking about working a bit on both interior and exterior a bit just to start off but mainly a few basic mods under the bonnet. Any advice/pointers on this model?

    • 18 replies
    • 19.3k views
  32. Started by ben,

    I have an AE82 Seca with a 4AC engine. Problem: Hot day- engine runs fine- stop engine and go shopping for 5-10 min- restart and drive- get about 1 km down road and vapour lock- heat soak into fuel pump i guess. Firstly- very annoying secondly- is it a common problem in this model? Has any body come up with a permanent fix? This is what i have done so far: Replaced toyota's dumbass metal fuel line on carby with rubber and double insulated it with a second larger hose. fitted a 9" redline aircleaner to allow more airflow and heat dissapation and a blocked off 99% of the pollution control crap. These have improved the situation but not fixed it …

    • 8 replies
    • 6.1k views
  33. Started by Revhead Kev,

    Hello everyone, I recently purchased a 2001 Seca Liftback AE112R. Was interested in knowing differences between the AE112R and the Ae102. Reason for question: Trying to find a worshop manual for the AE112R with the 1.8 ltr 7A-FE but can only find manuals for the AE102 with the 7A-FE. If the mechanicals and engine for both models are the same then i guess the AE102 manual would be ok to get ??? Thanks Kev

  34. Started by zmit,

    hey guys, i was just out cruising in my ae82 driving it a little hard when it started misbeheaving. it seems like its starving itself between 20% and 80% throttle, full throttle and no throttle seems ALMOST fine. but between that it starts to effectively bunnyhop... inconsistent torque? its happened once before, and it fixed itself overnight (good old rollas) but this time i just want to know what it is.... any ideas? it seems to be a carbie thing cos it doesnt matter what speed it is, just throttle percentage. :P cheers for ur help guys.

    • 7 replies
    • 4.7k views
  35. Started by RoLLa_PoWa,

    Hey everyone I'm am retrimming my door trims i can get them off ok but I'm having trouble with getting some of the material off, i was just wondering if anyone out there has any pointers or has done it before i have and ae82 corrolla cheers

    • 4 replies
    • 2.7k views
  36. Started by J-Bird,

    Sup rolla dudes,:D my water pump on the way home from work shat itself, and leaks coolent, i've tried putting more collent/water to see where it was coming from, it didnt help just leaked out again I'm going to pull it out after work tomorrow, and see if anything hasn't snaped, maybe try on the weekend to get a 2nd hand re-placement. Anyone else had this problem with the Ae71,4a-c engine before?

    • 7 replies
    • 4.2k views
  37. Started by Daniel,

    Hi guys, been a reader on and off over the years, had a few rolla's starting with a gze powered ke55, stocko KE70 and for a few yrs a god damn ford transit company van(diesel) yeh i said it. I'm now back in the market for a real car(toyota Only). I'm looking at a '90 AE92 with the injected 1600. I have a question that i havent been able to get answered, are all of these 100kw motors? If so are they the strengthened block engines(similair to gze block) with extra oil pickups? I found a real clean one with 170,000 on it for 4k with a year rego, I'm gonna buy it as it seems good. I will almost immediately throw a new suspension,brakes, int/exhaust and maybe wheels on it, …

  38. Hi All, Can anyone give me a definitive answer on whether the CV shafts fitted to an AE92 Twin Cam are the same as those fitted to an AE82 Twin Cam? Need new shafts and there are some AE92 ones on Ebay now. Thanks in advance for any help. Cheers, Todd

    • 3 replies
    • 4.2k views
  39. Started by Deleta,

    Hey hey My AE71 wont start any more, i was rolling out of my drive way slowly letting the clutch out , then it stalled and wouldent sart agian. tryed to jump sart with no prevale, went through all the wriingt in the engin bay to night and foud nothing. ny ideas...

    • 1 reply
    • 2.7k views
  40. Started by COROLLAANDY,

    Gday all I bought an AE82 Seca off the local Council and its driven over something large and realigned the front end. I've swapped all the damaged bits over but even with the tierods wound out as far as theyll go the front wheels wont line up straight. I need either longer tierods to suit or something to put another 2-3 cm into the drivers side rod. Anybody had this problem or has any ideas how to sort it out???

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.