AExx Corolla Discussion
1398 topics in this forum
-
I have just bought a 1989 nova and now I learn that it has a 6AFE carby motor in it. Is there any major difference between these and the 4AFC carby motor? If there is/are, what are they and are they mutually exclusive?
-
- 4 replies
- 5.4k views
-
-
gday i was at the wreckers today finding a strut brace for my ae82 and while i was looking at it the suspension is alot stiffer and lower so I'm just wondering what would i need to do to fit twin cam struts to ae82 sohc??? cheers Corey
-
- 8 replies
- 5.6k views
-
-
hey everyone, I recently aquired an australian, 1983 sprinter. I am wondering how hard it is to change the rear drum brakes to discs? Cheers Mark
-
- 7 replies
- 33.6k views
-
-
Hey Guys Have a 91 Corolla GTI with a small port 4AGE 16v. I want to add a performance cam to it and am wondering if anyone has any suggestions as to the better supplier, I have found camtech & crow have listed cams for it any suggestions or comments. Is there a limit to valve lift ? What are the std cam figures for duration & lift etc Thx in advance
-
- 5 replies
- 4.9k views
-
-
hi guys~~ need some help here with my new car ^^ it a 1991 AE92 Automatic, on the engine it say 4A but i am no too sure which of the 4A family it is.... sure it not a 4AGE lol there are few question i hope you guys can help me out, so any suggestion or idea is most welcome ^^ i don't know much about mechanic, at the moment i think it's around 60KW, i am no askin for too much increase so what is the easiest way to increase the power KWs apart from changing the engine? if i just change the air filter pod thing, and the exust piping and stuff how much power will that increase O_O? one of my friend told me that recondition the engine might help a bit, so any id…
-
- 2 replies
- 2.2k views
-
-
Hey I'm just gonna change my AE82 4AGE passenger side drive shaft. Is there anything i need to know that can make this job easier to get the shaft out of the disc hub? I know theres 6 nuts on the gearbox side and then the wheel nut with split pin. Anything that you can tell me that will make this job eaiser will be much appreciated. THANKS!
-
- 3 replies
- 3.1k views
-
-
Does anyone know what a Haltech Interceptor will and will not do with a std 4AGE ecu, I am getting conflicting comments and as I don't really know much about them I hope some wise bod here does. I am told by 1 person that the Interceptor will allow fuel and ignition mapping to be adjusted through the rev range to suit and can cope with upgraded cam without losing driveability on road. However I am told by another person that this is all true for most other factory ECU's but the corolla one is a little less flexible and a full ecu is really required. I only want to add a slightly better camshaft and lightened flywheel and tune it to the best it can be as I am r…
-
- 0 replies
- 3.3k views
-
-
Hi All, depserately need some help. I'm only new to this forum and new to the corolla way of life. We have just bought a 92 model AE94 Corolla Seca Auto. Since day one it has had a slight miss at idle, we put new plugs, leads, distribuor cap and rotor button on and it diddnt help. We sent it back to the car yard they have since fitted a new coil, changed the dizzy run tests and even had it on a dyno. Every test comes up that it has no problems but as soon as it sits idling you can hear it missing. it is only a slight miss, but it is there. It is starting to drive us around the bend, we have owned it 2 weeks, and it has been at the car yard for 4 of th…
-
- 13 replies
- 6.5k views
-
-
Hi guys Haven't been able to find this info going through the forums already... My engine isn't sparking, and we need help! already checked the coil, dizzy shaft, and looking at the module now (there's some kind of leak in the dizzy that maybe fried the module)... Can't work out what engine is in it- its an 1986 AE82 rolla with an imported 4AGE engine, that's been installed previous to us getting it. Engine has black writing with red eg TOYOTA 1600v TOYOTA 1600 (i forget what it actually says) I can provide more info if it helps... What else do you need to know? Any other advice is more than welcome..
-
- 14 replies
- 3.2k views
- 1 follower
-
-
hi guys, just wondering what width tyres you guys are running? i got a set of 16" rims sitting at home and the tyres i tried on them were 205/55/16s and they don't fit the car as it hits the struts. Was advised 205/45/16s will fit is that true? or do i have to go 195/45/16s? cheers, Polo
-
- 7 replies
- 3.9k views
-
-
Hey peoples, I own an ae92 rolla and was going to replace my brakes with the superstrut calipers but after reading the info on twincam.org about having to machinethe disc down to make it fit, i went and talked to a brakes proffessional and he said he would make up a bracket/plate which will allow the standard disc with a size of about 280mm to fit.
-
- 0 replies
- 2.3k views
-
-
Sorry if it's been asked before but I couldn't find the info I needed. (and being that the wreckers are shut when I leave and come home from work I can't go measure it up) I need to replace the passenger side bracket and main front bracket of my bumper on the 71. can't find a wreckers that have them but they all seem to have plenty of the square nose ke70's I know the actual plastic doesn't fit, but are the mount's between the two interchangable?? Cheer's Simon
-
- 2 replies
- 2.4k views
-
-
just looking into buy the missus a car and she has her eyes set on an ae82 hatch. for starters what would be a good price for a tidy white auto with mags and air-con, and also what are common problems with these cars as i was really only into the older rwd corollas
-
- 2 replies
- 2.7k views
-
-
I was wondering if anyone here can help me with a few trouibles I'm having with my 4ac powered wagon. I have pretty much a stock 4ac, except for the weber carb and removed emissions crap. It has been running well for a few months, since i replaced the stock carb. Now today i was letting it idle and then it just died. It is hard to start, like it will crank for ages and then struggle to actually start. It will only start when i give it heaps of throttle, and then it will die because it sounds like its choking or something. Every few times it will start and then the revs will build up until it idles normally, then i can rev it like normal. Ill let it sit for a few minu…
-
- 12 replies
- 6k views
-
-
Gday just having a problem with a friends car. Went to swap ignitions and couldnt get it out! Has anyone had the same problem?? You start the car and the starter motor keeps running, so turn off the key but the starter keeps going. Had to pull off the battery lead to stop it. Me thinking either a problem in the ignition system or possibly the starter relay crook, don't think its a starter motor problem, but it will be soon!! Cheers, any ideas??
-
- 5 replies
- 7k views
-
-
hiya, I'm having trouble with the rear disc brakes on my ae82 4age hatch. The hand brake is not working very well and the brakes are not working well (my ke70 stops much better). I bought some rear pads, but I can not get the slave piston to move. the hand brake lever (see pic) will still move the piston, but it seems to be holding the piston in position. The lever in removed in the pic I have two main questions. Do these brakes self adjust the hand brake? How do I get the brake slave piston to retracked? thanks Chris
-
- 4 replies
- 5.1k views
-
-
Hi I'm new to this forum and am pleased to find such a great following of corollas. :sob: I recently bought a 1992 Ae 95 Wagon, since I'm new to Australia I was a bit unknowing in regards to these cars. I love toyota and trust corollas so I happily snapped the car up when I came across it. :( Heres the thing. Fisrt of all I imediately love these cars (Weve had ours for a few months now) but the one we have is very plain and although I like not having power windows etc I do want other items extreamely bad. ;) So I'm on the hunt I want the best AE 95 that you can get. So what is it? I saw the black top conversion going on this site and noticed it looked to have t…
-
- 7 replies
- 42.8k views
-
-
Hi everybody. This is my first post here so I hope I'm not doing it wrong. :y: I just picked up a 1992 AE 95 wagon. The suspension in the top of the struts has play and makes noticible noise when hitting any sort of a bump. Ive deducted that it is most likely the strut support at the top that needs to be replaced. BTW can I get aftermarket ones if so where? Is this a weak link in the suspension on these? :bash: Now the real question since I'm replacing this part of the suspension which means pulling it all apart I want to lift the girl up a bit (up to 2") but wouldnt you know I can not find lifted springs anywhere. ;) So does anyone know what I can do short of gett…
-
- 2 replies
- 2.5k views
-
-
Hey guys, Thought this would be a good topic to start. In your opinion what's the quickest rolla and why? Now I know the 4age is up there with the best, but what model would you put it in to gain optimum performance?? :)
-
- 7 replies
- 7.4k views
-
-
hi guys, i am new to this forum, no sure if this is the right place to post this but anyway, i need some help with few questions i've got stuck in my head :cool: to make long sentance short, i am lookin to buy my second car, originally i was gonna try and get a AE82 local, or import a AE86 from japan (yes, i love Initial D :yes: ) but then i found out they are either hard to find, or expancive to import.....and i really don't have a pocket that deep so atm i have my eyes set on the AE92 hatchbacks (92 ~ 94 model) so here is my question someone once told me the AE92 come stock with the 4AGE engine and that is it the best N/A engine u can get for the AEs, is …
-
- 7 replies
- 4.3k views
-
-
Hi all! I'm new to this forum, becoz i got a manual ae112r corolla with about 150kms on it... Ive owned 2 magnas before this..so this is a change i guess, could you guys tell me about those 1.8's? as i got no idea about them, like performance, fuel economy, maintainence, reliability or minor mods as it only has 85kw and 154nm..comparing to my 3rd gen v6 magnas which has 140-150kw and 300nms etc.. great appreciated!
-
- 18 replies
- 42.7k views
-
-
I have an ae82 with the 4a-c engin is it at all posiable to put a 4a-gze into my car :D and if so would it need mush mods??? thanks :)
-
- 6 replies
- 3.7k views
-
-
I have just bought an 86 corolla hatch. It has the grill with all the little squares. The car was in an accident befor i bought it and this grill is cracked wich is ok because I'm not realy a fan of the look. I was wondering if I would be able to replace it with the straight grill out of an 88 corolla??? any help would be great.
-
- 3 replies
- 2k views
-
-
hey wanting to upgrade ignition on my 1987 AE82 4AC (i think) engine and was wondering what gt coil would fit into this. i know there is something to do with resistors etc in the ignition power supply.. any helps thanks josh
-
- 2 replies
- 2.3k views
-
-
Hey Until recently my little ae82 has been going great. But now it seems to be idleing irregularly. Sometimes it will idle fine and others it will jump between 500rpm and 1000rpm. Any help will be arrpeciated.
-
- 6 replies
- 3.1k views
-
-
Hey Hey, I put my 4age back together and the fans were working fine and now they stay on, Ive unplugged the temp sender wire and cleaned it and also removed and cleaned the sensor itself but still wont turn off. Is my sensor shot ? and can some one give me a part number for a new one ? I think its the sensor that goes into the thermostat housing. Des :yes:
-
- 11 replies
- 9.3k views
-
-
hey guys I'm new to this forum ive currently got an ae92 4afc does anyone know a specific weber carby that would suit it??
-
- 1 reply
- 4.9k views
-
-
Gday guys, Can anyone help me with this problem. I just got myself a gearbox for my 4AC corolla engine. I was told that it was from a 4AGE. But i don't know what one. On the gearbox case there is stamped 80222215 under that is 27 and on a bracket there is 5-16040. What i need to know is if it is a LSD, What corolla it came from and if anyone knows what CV shafts will go into it. Here is a Pic of it Any info would be great thanks heaps
-
- 7 replies
- 4.7k views
-
-
Some of you may know in the 4AFC engine there is a short bit of piping going from the top of the heat shield over the exhaust manifold, to the intake pipe. I have done a bit of research and found out what this pipe does. It's designed for the colder European climates, because the weather can be so cold, the engine would struggle to warm up. Getting that extra bit of heat from the exhaust and warming up the air going into the engine helps the engine to warm up. I've come to the conclusion that Melbourne doesn't get THAT cold, so when I get my AE92 in the next few weeks, I would like to remove this pipe, and plug up the hole left in the intake. Looking for advice fr…
-
- 17 replies
- 37.5k views
-
-
howdy guys, gonna regas a twinky tomorrow, but i noticed the sticker under the bonnet has fallen off/gone missing. can anyone tell me how many grams are required for a regas? also when the wipers are turned on the drivers wiper has way too much sweep, to the point that the drivers blade sweeps off the 'A' pillar. yet it parks in the proper spot and has no play in the linkages when the wipers are turned off. anyone know whats goin on with that? thanks, cameron.
-
- 5 replies
- 3.3k views
-
-
Hey guys, I have searched your forums and found nothing. I have a 1988 Corolla hatch with a 4a-lc engine. SOHC, 1587?cc. I have not long finished rebuilding and she splutters a little bit at idle. What should the spark plug gap be? Also, does anybody know how to adjust the fual air mixture on these engines? I understand it may have a Weber DVG seriec carby on it. Cheers. >anarky
-
- 2 replies
- 3.9k views
-
-
Hi guys , i currently own a 91 corolla GTi and just the other day i met this bloke who said that the GTi has the same engine as the SX (100kw), is this true? all this time i thought the GTi was the top of the range corolla, therefore if someone could shed some light and explain to me exactly what the diferrence is between the corolla Gti and SX?? and also this might sound like dumb quesion but how do you tell the difference between a black top and silver top engine? what other tops are there? as you can see I'm abit of a noob. any advice would be great!
-
- 5 replies
- 25.6k views
-
-
-
I think I blew up my turbo .... again and 500 klms out of warranty and 4 days after I got it back from my 100,000 klm service.... yesterday and today whilst I had the radio off and the window down I heard this air sucking noise, you know like when you put on a brand new K&N air filter and it's working well? Well I thought that it may be that becuase the RAA inspection I had done what, 10 days ago said it was dirty... so I paid no mind, but it was bothering me, so I kept an ear out.... Then tonight when I was going home, I had to overtake some cyclists who were taking up the whole goddamn road so I changed down to third and zoomed past them (not crazy) and …
-
- 10 replies
- 3.5k views
-
-
I just did a search but came up with nothing, my question is in regards to the slave cylinder and pedal box set up. I'm gunna have to drill the holes for this thing aren't i? is it easy to do with the intake manifold still on?
-
- 2 replies
- 2.8k views
-
-
I need new front and rear rotors, so I thought I'd have a squizzy and I came across these: The site I got the picture from didn't have any information on rotor's but they were using this pic... does anyone know who makes them or a contact where I can get them? - I don't want drilled and slotted, just slotted... oh, for my 01 Sportivo Lesley :)
-
- 6 replies
- 2.5k views
-
-
My 20V ST has a very low idle on cold start. Its at 400-500 RPM and supposedly its at 1500 RPM. Does this a connection with the water temp thermoswitch/sensor? My thermoswitch is busted coz the aux radiator fan is constantly on, even on coldstart. or do I need to take out the IACV and clean it?
-
- 1 reply
- 2.3k views
-
-
how much play should be in the threaded rod? i have my master cylinder out at the moment to fix my problems and i need to know how much play it should have it has about an inch until it starts to push the springs and feed the fluid through the lines. do i make any sense. Should the rod be tight when it is fully extended? Theres like 4 springs of different sizes wound together in the end of the cylinder and i need to sort the bastards out. any help would be great. AE93 SX if that matters
-
- 2 replies
- 1.8k views
-
-
Is there any company's that make extractors for the 4ac rwd ie AE71 ? thanks
-
- 7 replies
- 9.4k views
-
-
where would be the best place to get lowerd springs and shocks for a ae71 corolla on the internet thanks
-
- 19 replies
- 5.8k views
-