Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
:dry: need a bit of help like what wood i need and i want max power out of it
-
- 1 reply
- 3.2k views
-
-
heya i am just wondering the cost of a 4agze fitted on average and will i need to upgrade brakes and suspension also. ta 4 ya help :D kur|y
-
- 3 replies
- 4.3k views
-
-
Will a Ca18 motor bolt straight into a Ke70 and what other mods will i have to do to my car for a Ca18 to run
-
- 17 replies
- 44.8k views
-
-
thinking about change our 4a engine in our ae82 corolla to a 4 age engine or a 4a-gze engine what problems will we have? what do we need to do it help please
-
- 4 replies
- 5.6k views
-
-
gidday i want to wack a 4a-ge (20v) into Ke70 a corolla, anyone had any experience with this? this is my list please correct me if I'm wrong -ae71 hydralic cylinder/pedal box -ae71 crossmember/gearbox mount what engine mounts? what gearboxs come on these things in rwd variaty? any advice/help is appreciatted cheers,
-
- 14 replies
- 8.6k views
-
-
Ok, i have an AE101 Toyota Levin that i wanna take the 20v 4A-GE (non super) outta. and throw something in that will make the wheels spin on the spot in 5 gear. Ok, maybe not that nato. but you know what i mean. I wanna give it more guts. more. POWER. i love that word. anyhow. when it comes down to it. I really don't know what to throw in it. So basically does anyone have any ideas? Ta. Gr3mlin
-
- 36 replies
- 19.1k views
-
-
What is better to run in a 4kc motor without putting stainless steel valves in, unleaded or premo unleaded?
-
- 12 replies
- 8.5k views
-
-
Hey all, Ok, so like 3 months ago, i throw an alarm in my AE101, but at that time i didnt hook up the engine starter solaniod relay, manly cos i didnt know which blood wire to look for. Can someone please help me.? Also, i need the COIL power wire so i can also switch that as a backup. ALSO the fuel pump power wire! :lol: ta Would you recommend i do that? Ta Gremlin
-
- 0 replies
- 6.7k views
-
-
Stupid question here. I'm doing the wiring up on my red car ATM and i need a little help with how to wire up the ECU. There are two wires +B1 and +B. where do these get connected to. I assume they are to a relay of some kind. BATT I assume just goes to a constant 12v and FC cuts fuel when the engine stops running and the ignition is on. Any tips where to plug these in?
-
- 19 replies
- 20.7k views
-
-
hey guys i just got off the toymods site n there is an arrogant prick on there so i8 thort i try here! ive got a ke70with a 4k with a worn out 4 speed! I'm currently undergoing a turbo conversion for it and i want to put the five speed in it but i dnt know what box it is or where i would get one from? if you could help that would be great as I'm relativly new to corollas so I'm trying to build my knowledge of them! from pat
-
- 19 replies
- 30.1k views
-
-
Wells i seem that the other thread is Rather long with a lot of the stuff being without my car (no pics) also other can learn off my journey if they want to do the same thing, without having to sort through some more meanless Q&A (i do know how many of these have been done btw :D ). So this will the construction thread for my Ae71 Spirit Conversion :insane: The action starts here.... Original car Body Work
-
- 1 reply
- 7.5k views
-
-
woohoo, my 5k is now together and ready to go in my ke15 tomorrow. the 5k has 9.5:1 CR, mild porting, valve springs with dampers (good for over 8 grand), tighe 113 cam (25/65 65/25 400 thou lift), solid lifter conversion, double row timing chain. should go well. :)
-
- 27 replies
- 19k views
-
-
I wish i had a five sped in my rolla is this possible does it fit in that small tunnel, and whats one of the easier motor conversions that will give me a little more go?
-
- 9 replies
- 11.1k views
-
-
-
hi broz, i've just got me a carola and i want to put wun of deze beasts innit... wots can i do to it to make it kill dem sik wrx n evoz? cheerz bruz! ThA bEaZt! couldn't resist :)
-
- 5 replies
- 9.5k views
-
-
Hi, I'm new hear and need some help with my conversion. I've got a hydraulic clutch from an AE71, but need some help with the KE70's pedal box. What do i do with it. Modify it, or can i swap the AE71 pedal box over??? :sad: Also, with the fuel setup. What have people done. I've got a surge tank, Vl turbo high pressure pump and a pre pump. Where is the best place to mount this gear? Boot? Under car? Engine bay? Also how have people set it up. Thanks
-
- 42 replies
- 38.4k views
-
-
Hey guys I'm looking at getting a ke55 81 coupe. And dropping a 4agze in it, and was just wondering how much it would cost to buy a reconditioned 4agze? Also what other mods would i have to make to the car? Eg diff, gearbox, suspension, breaks ect... Could you also give me some prices on these engines? 4a-ge ca18det sr20det oh and if i put a 4agze in the ke55 will it keep its RWD or will it be a FWD? i am new to this if u didnt realise :D
-
- 6 replies
- 12.8k views
-
-
Hello people I have been doing my research on engines, and I'm slowly geting to know all the stuff - a big thanks to everyone who has helped me, i wouldnt be this far if it wasnt for you! There is a guy selling a 4ac in the next month or so, who is willing to get rid of it at a very good price. He has offered me a very good deal, and I'm actually considering it. Yes, i know its not a 4age, but on my budget - I'm not sure how i could afford such an engine like that; espically when the cost of getting it to a running stage was adleast $1000 away... So, Lets say i purchased this 4AC motor (completly working condition), and i wanted to put it in my car. So fa…
-
- 53 replies
- 57.3k views
-
-
Click me - Link I wonder if any one has put a 7M-GTE - 3.0 Litre 6 Cylinder DOHC Turbo into a Ke70?!
-
- 1 reply
- 9.7k views
-
-
hi all I'm looking to get a new engine put my corrolla with in the next 18 months. Ive got a KE55 and have no idea what to put in it. i was just wondering which one would be the best to do if you were on a budget??? thanks guys andrew :D
-
- 10 replies
- 12.8k views
-
-
hey I'm just wondering if anyone knows how much a conversion would cost to put a 1jz-gte into a 1983 st141 corona and where within nsw would there be someone able to do this type of conversion.
-
- 6 replies
- 11.9k views
-
-
Hello all Well, I'm still researching engines and all that goes along with it. As every 1 knows by now, i would think later on down the track i would want somting Slightly more powerfull than a 4k !, But I'm not sure what.... After reading MANY articles on engines, and what people have done to there cars etc, i would think i could get a good setup for about 2500 / 3000. 13B, 12B turbo, 4ge, 4azge.... the list is endless. As long as the TOTAL COST is unda about $3000 (that encludes everything so i can get in and drive it away) If you were in my feet, what would you do / be looking for ? All positive and negitive feedback welcomed. I have not…
-
- 45 replies
- 40.9k views
-
-
hi all, I'm seeing the bank manager soon and need a rough price on the conversion, SR20 turbo 5 speed, hilux diff lsd, or other (please suggest?) brakes??, suspention??, fuel system??, engineer cert.?? and any other surprize costs?? your help will be greatly appreciated. :)
-
- 15 replies
- 37.5k views
-
-
converting wifes ae82 to efi and need standard ae82 wiring diagram anyone have any idea where to find on the web. peter (ke20 from hscc motorkhana's)
-
- 2 replies
- 12.1k views
-
-
i wonder how easily the sr20 in my ke70 would go into that?? Do they use same chasis, engine mounts, cross memeber blah blah as a ke70?? Are there any major differences between the 2??let me know
-
- 1 reply
- 20.1k views
-
-
Did you know that my car - Maxi (TOMsGPTurbo) was the first Toyota Corolla II GP Turbo fitted with a Starlet GT engine in Australia! Before I started I looked for information about the conversion everywhere possible with no-success at all (including contacting all known EL31 owners in Australia and around the world!), so I bit the bullet and went ahead ... and after publishing what I had done... there is atleast another 4 cars in Australia who have completed the conversion. Strangely the Japanese GP Turbo club (EL-R) have no info on any of their cars with this conversion. Meaning maybe Rolla-Club's GP was the first ever GP Turbo in the world to do the 4EFTE conver…
-
- 4 replies
- 11.9k views
-
-
no i am not crazy, i am putting a 1ggze in a st141 for my brother and was wondering if anyone new of anyone to whom has done a similar conversion.
-
- 2 replies
- 10.9k views
-
-
found this video of a 20b ae86. http://www.turbocorolla.com/media/video/3rotorAE86.asf
-
- 11 replies
- 13.7k views
-
-
Hey all Well, after 2 days karting session with a friend (archefield carts) ive got an idea. 1 of the guys there was talking about a Rotax kart which had a 500 CC motor & a 5 speed attached - did the 1/4 mile in just ova 11 seconds - and could do wheel spin around the hole archefield kart track in 3rd gear... :D So, This gave me the idea. Rotax + Rotax + Rotax + Rotax = (500 X 4) = 2000 CC ..... into ke70... .... .. - nar - :P Why do that, when i could go and get a super bike motor that redlines @ abou 14 k, connect it up into the ke70, using all mod bits to get it to fix, and see how that goes :D (Disclamer - its only a '…
-
- 6 replies
- 19.2k views
-
-
Hey All When they say Twin cam 16 V - 2 inlet, and 2 outlet for each Cyl = 16 (2x2x4) When they say a 20 V twin cam - theres 4 extra valves hanging around there somwhere lol - Where are they? - I'm really not sure where they could be hidden?! (glovebox?!)
-
- 6 replies
- 12.2k views
-
-
-
hey I am after some help on turboing my rolla its a k series engine namely a 3k and i want to run a blough through turbo set up, but don't know how, any help or advice would be much appreciated. Cheers,
-
- 10 replies
- 15k views
-
-
- Whats this ? - What excatly is this process? Cheers, Teddy
-
- 0 replies
- 12.6k views
-
-
As of a few minutes ago my engine build is at this stage. Pistons and conrods are out Crank is out Timing chain is off Cam is still in the block I'm currently considering sending the crank and rods off to get cryo freezed. I'm also looking into getting some standard bore ACL Duralite pistons. At the same time as the crank and rods are away I'll get the block hot tanked and decked so its nice, flat and CLEAN!. EFI should be here in a week or two
-
- 0 replies
- 13k views
-
-
Hello All You are probernbly wondering what is this bloke on this time - yeah, the air con idea caused some talk, but ive got another idea (s). :D Lets see. The 4kc Engine is a good engine, with some mods, it could possibly make some serious peformance (take nicks 4 example - its not completly suped up, but its sure 1 hell of a ride). I was thinking of moving a 4kc engine in the engine bay so its upright, (the are actually on an angle) and move it to the right as far as possible, and then go and get anotther 4kc motor, and squeez it in beside it ! ! ! Now, some complicaiotns - u connect the engines like in a gokart - or like on the belts at th…
-
- 7 replies
- 15.2k views
-
-
I'm set on a 4ag conversion for my car as it seems a waste of time to put in another 4ac to only rip it out in a couple of months time. So what I wanted to ask was what ingreients do i need to make sure this conversion isnt half-baked. I realise I need a: 4ag engine, loom, ecu, mainfolds, alternator. Anything I missed?? Fuel pump, surge tank. Any reccomendations?? Lines, hoses etc Have I missed anything important? What can i recycle from my old engine? Any help, tips, experiences would be appreciated.
-
- 4 replies
- 14.6k views
-
-
A friend of mine has basically a complete 12A turbo engine in his garage and has offered to do an engine conversion for me for extremely cheap. It is my understanding that this wont be legal but he seems to think it is. What i want to know is if its a good idea? Can it be engineered and if so what sort of work would be required to get it to pass? also what would be the best way to go about strenghthening the chassis. I was thinking roll cage and seam welding or is seam welding a waste of time?
-
- 24 replies
- 30.8k views
-
-
Hey Guys I need a little help I need to find out how similar the RA60 or the RA40 Celica is to a 82 Rt 133 Corona. It has the 21r-c in it at the moment. Ive got a write up on the full conversion for the 1GGTE into a RA40 or 60 but its not a Celica so I'm not sure. The RA40s engine bay is nearly identical by looks. So someone no's who similar they are can you please tell me the differences so i can hopefully get it underway. :blinks: thanks trd_driftr
-
- 0 replies
- 16.5k views
-
-
http://www.toyotacelicaonline.com/celica1/...1/3sgteswap.htm pretty good i thought. good links too...
-
- 0 replies
- 13.1k views
-
-
hey everyone I'm interested in turboing a gze in to my ae 92 (Q).. what turbo to use.... is a cutom plenium a good idea and what motor did the lsd gearbox come from to fit this conversion any help
-
- 1 reply
- 14.6k views
-