Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by jakedamus,

    Hello. Anybody that can help me your advice would be appreciated I was able to get a rolling body of a ke20 off my mates dad for $150. It has everythin minus the motor gearbox and clutch. I was thinking about putting a 4agze into however i have realised the job could be bigger than i thnought. What Would be needed to upgrade my ke20 to a 4agze? wil i need to upgrade the brakes, diffs and drivetrains? what is the likely cost? If not putting a 4age in it what would be a simpler engine upgrade that still has a bit of power. Thanks!!!!

    • 5 replies
    • 2.7k views
  2. Started by Old-Skool-Rolla,

    Hey guys. My name Nathan, some may know me, most wont :D I am considering a conversion into a KE55 or similar. I have been researching it for a while now, and have read the FAQ, and did a few searches, but i still have these questions. I WAS going to do a 4AGTE but have been suggested against it, as the work needed. Now i have 2 decisions i would like to do. 1. A 4K with pretty well most of the stuff suggestd in the FAQ on how to work a K-series motor. Using a K50, or T50 g/box, and most likely the standard diff, "profesionall" wellded. Budget of say $1200. 2. A 4AGE (probably bigport) with a T50 g/box, and Again most likely the stock doff "professi…

  3. Started by stockman,

    hey guys I just bought a 1986 Corolla SE sedan. Do you guys think its worth it putting a good engine like a 20v 4AGE in a front wheel drive corolla? Opinions please

  4. Started by casey,

    ok many carb ideas have pased and i was attracted to the twin carbs on e-bay my new idea is using the standard inlet manifold could i make an addapter to use two standard carbies? most of you ar thinking wtf??? but i have 2 standard carbs and little money at the moment so i think this should work, the only worry would be height but thats modable with the addapter height i have enclosed a quik sketch so you get what I'm on about thanks for reading, casey

    • 44 replies
    • 16.3k views
  5. Started by Crash,

    as the topic says.. what are some cheap engine conversions into a ke70.. I'm thinking maybe a 4age or somthing... how easy do they fit ?? or a ca18det...

  6. Started by EX-MR2FREAK,

    Hey all, just registered on rollaclub cause i have a problem. I recently smashed my MR2 and now i have a spare 4agze just lying around begging for a conversion. Not wanting to spend a fortune, I'm looking for an old corolla to convert. I'm wondering which model would be easiest or possible to put a 4AGZE in to. I'm looking at an old rear wheel drive corolla. Obviously the gear box will need to be changed. How hard is it to find a T50? And what other alternate parts would need to be sourced for such a conversion? Any advice would be helpful. Thanks.

    • 3 replies
    • 2.8k views
  7. Started by 3t gte rolla on the way!!!!,

    hay guys I'm haveing some trouble finding info on the car my engine came out of???? any help woulf be good as i want it on the road asap!!! cheers

    • 2 replies
    • 2.3k views
  8. Started by billygoat,

    Has anyone put the twin carb set up from a 93 model civic onto their 3k engine, I searched for info but couldnt find any. If you have any advice or info it would be greatly appreciated. cheers Jarrod

  9. Started by rollacdmd,

    Well guys and am very interested in the new 4AGZE 20valve silver top with the supercharger (outta the AE101) however when looking through all the rolla sites can't seem to find any one with that exact engine in a old rolla example 1974 KE35 coupe. I mean i see alot with the 16 valve sprinter engine outta the AE86 but can seem to find any with that! QUESTION 1 When changing that engine from supercharger to turbo is it true if you buy a awesome turbo and ur BHP jumps like 100hp do u need to rebuild the engine to cope with that new power? QUESTION 2 also with that engine some of the AE101 have a 6 speed manual just wonder does that fit or do u need that T50 b…

    • 13 replies
    • 49.5k views
  10. Started by tetsujin,

    Hi all i have a ke70 that I plan to put a 4age in as it currently has a stock 4k. now, re the conversion, I am all set, know what to do etc. but the problem that has just come up is that. I am using a ae86 as a complete donner car for the ke70. but I have been told that even the ae86 pedal box is not a straight fit?? If its not what exactly should/needs to be done to make it go in correctly?? And tips from people who have atually done the conversion using a ae86 pedal box?? Cheers adam :P

    • 11 replies
    • 7.1k views
  11. Started by foc64,

    Hi All I'm going to be undertaking a 4age swap in my AE71 Wagon soon and have a question about Engine looms. As 4age looms are getting a little thin on the ground, can I use a 4afe EFI Engine loom instead? I need to know if this loom will plug in to a 4age big port computer, not fussed about re-wiring the loom it's the ECU plugs that are hard to find. Chris

    • 0 replies
    • 2.3k views
  12. Started by casey,

    ohk this is a very random idea that came to mind, could i rig up a tank of compresed air and have say a regulater by my side and have a pipe going into the manifold to push amounts of air into the engine? I'm only a kid so don't bag me and tell me the reasons you could/couldn't rig this up thanks casey

    • 14 replies
    • 4.6k views
  13. i want an easy fit no to meny custom fabricated bits i can get mounts and stuff made up no probs ill be geting a half cut so i know i have all the bits(i hope:p) and any one got a web site that has the regulations and stuff i can't find any for nsw... kk thx ps sorry can't spell

  14. Started by c budge,

    hey i just got a 3t today with a t55 box for $300 its got everything for the engine. i just want to know what to do next...? like where to put the mounts? do i need a new Xmember what upgras need to be done? etc.. i'm in the act so if any1 has anything to make it easyer or to help out thanks

    • 26 replies
    • 11.1k views
  15. While dad is busy painting his AE86 i'm finishing off the wiring for him. The conversion is AE82 bigport 4AGE into oz AE86. The engine loom is JDM AE86 but the ECU is from a oz spec AE82 (as far as i know any 16V ECU will do, just the maps differ). What we have working so far: Alternator Starter motor Ignition (get a nice beefy spark when turned over!) Fuel pump Having a few problems wiring up the injectors. Checking at the ECU pins the injectors have no power. I'm thinking that this yellow wire in this picture (the wire in the middle of the plug) is supposed to be connected to the ignition switch. With it connected to power i get the required voltage at the…

  16. Started by PMP020,

    hey rollaclubbers. check out my dedicated burnout ke20. for those of you on toymods I'm very sure uve seen or heard of it before. http://www.toymods.net/forums/showthread.php?t=8862 feel free to leave all the comments you like. it is my pride and joy. cheers scott

    • 5 replies
    • 2.4k views
  17. Started by roids70,

    well as the topic say 7MGTE in a t-18 i know it would be heavy in the front eand and i would have to do brake and suspension upgreads but what do u guys think?

    • 25 replies
    • 8.6k views
  18. Started by 7shades,

    Hey everyone... long time reader first time poster blah blah... I'm up in cairns, which is a great place to pick up cheap wheels from backpackers at the end of thier holidays. (three KE70's so far :) ) Anyway yesterday i somewhat impulsively picked up an '84 tercel... resplendent in faded red with compulsory 80's graphics and brown tartan "picnic rug" interior. Sexy. So I figured it would be some cheap fun to weld some tractor wheels onto it and go bush... and then the strangest thing happened. I looked at it a little closer and its in almost perfect nick... no rust, no dents, no rips in the interior, good carpet, no clunks in the drivetrain etc... I took it …

    • 22 replies
    • 6.7k views
  19. Started by rollacdmd,

    HEY!!!!! what i really wanna know is which one is more reliable which one would run the best outta the both and I'm talking about dropping the newer 4AGZE the 20V not the older 16V seriously could u get the same power outta the 20V 4AGZE supercharger than the 1.8DET turbo standard and wats the max BHP 350 bhp or what!

    • 4 replies
    • 2.1k views
  20. Started by nm8693,

    :lock_folder: Hi all, I'm just new to this forum and have been playin around with a few ke30( Coupe)and I'm interested in goin for a 4AGE conversion in mine. I was just wondering if anyone has tackled it here and if so could u guys share with me the pros and cons of the conversion. thanks

    • 3 replies
    • 29.5k views
  21. Started by Raven,

    I was browsing around the net early this morning and came across this website. I'm not sure how accurate it is but i thought it may be of some assistance to those who are undertaking a 4Axxx conversion. 4Axxx Wiring Diagrams Hope it helps! Raven

    • 0 replies
    • 2.6k views
  22. Started by Rollin-Rolla,

    hey guys ive only written very few messages on here havent had the most amount of time to really chat. my name is Peter i live in Adelaide, and I'm 20. sorry if some of these have been posted before but from my searches i could not find specific details on these particular problems I'm currently having so all help from people that know ke70's really well would be greatful. my project is a 1983 ke70. Blacktop s13 sr20det sitting inside it at the moment all mounted up, not wired up yet. unfortunately ke70's didnt come with hydraulic clutch and i was wondering if there are any that bolt up into the ke70 to make it a hydraulic clutch? I also need to do a larger br…

    • 12 replies
    • 11k views
  23. Started by nedic,

    hey guys had alook through out tha forums but i couldnt find any info bout putting a 7k into a ke30. just like to know if any1 can help me out if tha mountz alrdy in tha ke30 would fit a 7k in.also wuld i need a different crossmemba at tha gearbox and mountz??? n koz tha 7k is out of sum vanz or sumthing n its injected what wuld i need jst 2 make it run off a carbi/webber. also tha 5k. does that jst bolt in?? or is there more mods that u hav 2 do??? wuld appreciate sum help cheers

    • 1 reply
    • 2.3k views
  24. Started by ROTORNUT,

    hey everyone I'm new here, I'm from adelaide and i own a 1970 ke11 rolla. Been thinking about converting a 86 rolla engine(1.6L) into my rolla just wondering what needs to be done etc??? any help would be greatly appreciated :hammer: Cheers evryone, chat later

    • 8 replies
    • 2.7k views
  25. Started by johnny t,

    ive got a sc 14 running a su and it is idling really funny ive talked to a few people and they say there is to much air gettin forced in at idle it runs fine one i take off.. i need to no how to fix it asap any help would be good thanks johnny t

    • 13 replies
    • 2.5k views
  26. Started by casey,

    hey all iv found a cheap 3k (compleat) and i want to know what parts off it i could use on a 4k? thanks casey

    • 6 replies
    • 2.3k views
  27. Started by ke70=fun,

    Hey guys i'm new to this site and have owned my ke-70 for about 4 months now. Its a fairly clean one with small amounts of rust. Only problem is its auto and the current stock engine is running like crap. Misfiring, leaking oil from the engine and so on. Any way i want to change it to manual and buy a engine with a bit more power. My budget is around $1700 to spend so i have to keep the price down a bit. What do u guys recommend any help would be really appreciated thanks.

    • 1 reply
    • 1.7k views
  28. Started by c budge,

    if u need info on engine conversions have a look at this http://ke55.1colony.com/

    • 0 replies
    • 1.6k views
  29. Started by madrolla68,

    So I'm doing the whole EFI,Wolf 3D thing as you all know,do i need to get an O2 sensor or do i just run it without one. Its all new to me.

  30. Started by chric,

    Hey everyone i'm new to the forum and was hoping someone could help me out :jamie: I've got a 1982 ke70 and i'm wanting to know what the easiest conversion/upgrade options are for it...the biggest concern i really have is i don't really want to have to change the mounts. thanks c

    • 0 replies
    • 2k views
  31. Started by jamesrolla,

    I'm not doin this conversion but i thought some people would like to check out the pics of it, this looks so neat this car but the engine bay been so dirty lets it down a little check it out: http://www.toymods.net/forums/showthread.php?t=767&page=92 cheers james

    • 6 replies
    • 5.5k views
  32. Started by casey,

    hey, I'm just after some power specs on what your 4k like 1/4 time 0-100 hp/kw thanks casey also if any one knows of any vids of corollas with 4ks can you get me a link?

    • 8 replies
    • 3.3k views
  33. Started by Hibino,

    Hey guys my mate has a KE70 with a 4A-GE in it and he wasn't sure what was needed to swap out the GE for a GZE. I was wondering if anyone knew what he needed to do? Also does the bell housing need to be changed or will the sprinter box fit up to the GZE. Thanks guys.

    • 2 replies
    • 1.7k views
  34. Started by chrisandliz,

    hi, boyz. i just got a 3t-c. i was doing some research and i read about 18r. is there some way of getting one in to my ke70 or is there some hiden rule about stealing for bigger bother models? i have a t50 gearbox, and the celica has a w50. is there any way that you can get a 18r to run with a t50 on it?or do i need to use the w50 this is my 3tc i'm gonna remove the E crap and put a weber on it! :dance:

    • 9 replies
    • 5.1k views
  35. Started by lowey_6,

    anyone know of engine mods that can be performed on a 4k engine to get more performance..........eg carbys, head work. cheers

  36. hey thats to all the people that have told me stuff sofa. um but i still need to know what i need to do. just like a quick help would be good

    • 9 replies
    • 5.1k views
  37. Started by c budge,

    can i put a 3tgte in a ke30..

    • 9 replies
    • 4.8k views
  38. Hi rolla fans, About 3 months ago now I was given a KE30 rolla with a 3K motor in it sporting a 100% stock parts and a K40 trans and standard axle. But the car has 375,000 KM on it and has never had a rebuild and is still going good and blows no smoke. But it is starting to die now :) As in a cold morning I can run battery flat starting and it has lost nearly all power and the clutch is heavily worn. So I figured time for a rebuild but then though it easier to install a new motor. I was able to pick up a 4K that has 100,00Km on it and a 6 spring racing clutch after market hardened valve seat and a minor head shave for AU$50. But first a few questions. …

    • 11 replies
    • 4.1k views
  39. Started by wasfishing,

    ok i have a ae82 rolla seca csx which came out with the 16V 4age. the motor isnt to flash n e more and have recently been offered a 4agze engine and comp. what i need to know is will the gearbox bolt straight up (pretty sure i will but just checking) and will it be able to hold the power? also is the loom the same, can i just plug in the new comp? any help would be appricated Shane

  40. Started by RLABO1,

    hey guys i need a little help if any one out there knows any thing about RA40-60 celicas . i know this isnt about corollas but its my a-b car for the time being. i have an RA40 celica, with the original 18R-C engine. it s!$% itself the other night , I'm suspecting new engine. i can get the engine from a celica that is the next model up from it, which is a 2l carby, now ive been told two things: 1. the 18rc is a 2L anyway and the newer 2L will fit bolt/unbolt straight in no changing of nothing. 2. the 18RC is actually an 1800cc engine and i WILL have problems with fitting the newer 2L engine. i really don't have a clue either way, so i hope you guys could shed some light …

    • 5 replies
    • 2.8k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.