Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by mastis,

    hi, i'm new to this site, just bought a ke55, and want to do this up as my project car... i want to put a n/a carby 12a into it. i was wondering if this is possible? and what engineering needs to be done to put it in??? i have been told that a 12a motor and gearbox will fit in(with the rx7 engine mounts) and bolt up to the rolla housing.. and what diff is the best and easiest to fit??? any help is greatly appreciated

    • 5 replies
    • 3.8k views
  2. Started by c budge,

    hey just want to know about turbo size are the to4 the same size as the t25 need to know the exhaust size to thanks

    • 13 replies
    • 5k views
  3. Started by Smokin Rolla,

    Hey! I have 82' KE70 Sedan, 1.3 Automatic. (Drift Machine) Haha! Ideas on engine conversion it has to be a toyota engine!

    • 2 replies
    • 2.3k views
  4. Started by ae112r freak,

    anyone ever done anything similar to this before? and hints tips? is it possible? please gimme some advice because i wanna try and get some power into this lightweight car

    • 3 replies
    • 1.9k views
  5. Started by HIGH ROLLER,

    Hi there fellow rollaholics... Just a question if anyone knows wether or not u can put a sr20det in a ke20 and have it registered (engineered)... Also, in australia was there ever a four door ke20? how much did it weigh? Thank fellaz, Keep Rollin....

    • 20 replies
    • 15.9k views
  6. Started by offbeatind,

    gday all!! i am geting a turbo kit made up with manifold and i think a t28 garret turbo! I'm lookin for around 250hp atw!! i was told that it will hit full boost at around 4grand and make 250 atw on 18 psi!!!! (this guy knows what hes talking about!!) I'm getin the stuff from over east!! ( I'm in wa!) i will have the agze conversion (got the front cut!) i am getin a microtech ltx10 ecu 3in exhaust (hiflow cat and muffler!) i was thinkin of goin with the supra turbo fuel pump and injectors as (so I'm told) its a direct fit-up! front mount cooler and I'm keepin the stock oil cooler!! my question is what fuel regulator should i think about gettin and what other…

    • 18 replies
    • 5.6k views
  7. Started by AlexK,

    Hi guys, a couple of shots of my horolla or toyonda. Honda S600 with a bigport 4AGE. Initally had a mild 3K in it but was sadly underpowered at hillclimbs. After reading your forums and Phil Bradshaws page I decided that a 4AGE would be worth installing. as with all conversions this had some issues ( all overcome). The car has been log booked by CAMS and I use it for hillclimbs. I am still fine tuning it but on the Dyno got 68kw ATW ( much better than the 34kw ATW the 3K got). I am trying out the "flasher can" substitute for the SPD on the ECU this weekend ( thanks to all for this info). If this works the extra 800-1000RPM at the top end will be well used …

    • 14 replies
    • 19.8k views
  8. Started by dookie,

    hey guys, one of my mates has a ke55 and someone was telling us that there is a 2litre corona motor that will bolt straight in to his ke55.... is this true or false? if true.... what year corona is it out of? and I'm guessing u use the corona 5speed aswell...so will its crossmember bolt straight up to? and can u keep the ke55 tailshaft? my mate is very keen to do this conversion, so if any one has done this before or knows how its done...please let me know EVERYTHING that has to be done and what is needed! thanks guys! -Nic

    • 13 replies
    • 5.9k views
  9. Started by BBQ_Rolla,

    was wondering if i could get me ke20 registed with a 5k, without a engineer certific. In Vic

    • 9 replies
    • 3.4k views
  10. Started by thedozzman,

    I'm looking for any information about the old HKS Twincharger kit for the 4A-GZE, seen pictures, seen many 300+hp cars with the kit, but there is little information on where to find one of these kits, or how to fit it. Can anyone help???

    • 10 replies
    • 6.5k views
  11. Started by Rockn Rolla,

    13b turbs or 4agte? I have recently scored a ke10 rolla and am unsure of what engine i want and need some help makin up my mind! what u reckon....

    • 14 replies
    • 5.3k views
  12. Started by Taz_Rx,

    Only ever seen them in the states. Waiting on a reply for a HKS exhaust manifold for sale. If I get one, then I can justify the HKS sticker I'll put on the front of the door.........NOT!!!! :S Heres a couple of piccies. Not much point in asking me about them, cause I have no more info.

    • 11 replies
    • 14.9k views
  13. hey guys I'm after a k motor under $500 to bolt up to my ke70 witch 1?

    • 3 replies
    • 1.9k views
  14. Started by lloydske70,

    hey guys ive got a very tight budget of about $1500 to $2000 so ether a 4age or 253 v8 or vn v6 maybe not sure what do u guys reacon?

    • 1 reply
    • 2.3k views
  15. Started by dookie,

    hey guys, in a day or two I'm gettin another corolla sedan, not sure of the model but its a 78-79 i think, it has the same tail lights as my mates 81 ke55 but it has round headlights, anyway, i have made a turbo kit for my vn v6 and that was easy enough, but i wanna do it to my corolla, exaust manifold will be easy enough to make and all the plumbing, only thing i dunno how to do is get the air from the turbo to the inlet manifold...my vn was easy caus all i had to do was make a pipe to go from the turbo to the throttle body, but i don't know to turbo a carbie motor??? any help and pics would be muchly appreciated cheers guys

    • 23 replies
    • 6.7k views
  16. Started by c budge,

    hey people i nee so help i have all my 3tgte suff the engine is in the car now running just with standed ta22 stuff but now i need to put the efi stuff on so the turbo can go on. so i need to know what car the 3tgte i out of or if u have a 3tgte wiring diagarm thnaks

    • 1 reply
    • 2.4k views
  17. Started by dookie,

    hey guys, me and my mate have(for a fair while) been wanting to put a vn v6 motor in his rolla sedan(i think its ke55) we are just wondering bout engine mounts and and gearbox xmembers and things... does any one make/sell them? also, i was thinkin... the tunnel thing down the middle of the car that th gearbox sits under..... does that need to be cutout/made bigger so that the vn gear gox will fit?? we need all the information we can get, so if u know anything or have done it b4.. please let me know! cheers guys

    • 1 reply
    • 6.3k views
  18. Started by Max2440,

    Help bought a 4age from sydney to fit into a AE82 well fitting not a problem but on the ECU how it has the 3 plugs i can only find the 2 plugs the large one and the in the center of the 3 i can't find the smaller of the 3 do i need it or is it just for electronic speedo and stuff like that because thats how I'm reading it on the ECU picutres that you have printed up lol well thanks anyways

    • 4 replies
    • 4.8k views
  19. Started by lloydske70,

    hey guys I'm putting a 4a-c on a 4k gear box and i need a flywheel for the 4a-c and i was wondering if i need to get a clutch to or will the 4k clutch bolt on to the 4a-c flywheel? :jamie:

    • 1 reply
    • 2.5k views
  20. Started by goldx,

    I have recently obtained a 2tgeu EFI inlet, ta45 ecu, loom and air flow sensor and now i want to fit on to my 2tg(I believe used to be 2tgeu, when imported), so my ta22 can run smooth all day every day instead of coughing 3 days a fortnight between tunes, it has twin solexs'. :wub: Will I loose any power? :jamie: Can anyone tell me where I can get vaccuum schematics and wiring diagram(color coded) as my motor has still got some sensors and this loom that I have has some cut wires? ;)

    • 3 replies
    • 2.8k views
  21. Started by lloydske70,

    if got a 1300 ke70 (ceised) so i took the 1300 out and have got a mate with a ae70 with a 4a so should i bye the ae71 and swap engines?

    • 3 replies
    • 1.7k views
  22. Started by Emerson,

    Has anyone tried fitting a 1JZ-GTE into there corolla and if so how much has it upset the balence of the car. Also how easy was the conversion.

    • 4 replies
    • 30.7k views
  23. Started by Bigger Is Better,

    Hi guys could anyone tell me what sort of compression i would be looking at running a 3k big port head on a 5k block and what other ways i can up the compression. ie different pistons, decking the blocke etc. Cheers

    • 35 replies
    • 56.5k views
  24. Started by 'rolla,

    I have a Ke70 rolla sitting in my yard with a blown engine a mate has a 2ltre engine from a ta24 celica which he is willing to give me for nothing. Does anyone know whether i can plonk the 2ltre into my ke70? how much work is involved and is is worth it? any help would be greatly appreciated

    • 13 replies
    • 7.7k views
  25. Started by alloroC,

    well my 4A has cracked the shits and finally died has a cracked water jacket at the back of the motor and is leaking coolant like theres no tomorrow. it also blew off the bolt on the rocker cover and sprayed oil everywhere in the engine bay. Its screwed the thread on the rocker gear and can't tighten. So my question is, what engine can i put in there without too much hassle. would it be easier to put a 4A back in? or can i get a 4K to fit? help me out people Thanks Jon

    • 20 replies
    • 9.4k views
  26. Started by AE80Rollaguy,

    hi all I'm new to the whole corolla thing, i have a question for u all i have brought a ae80 rolla and is doesnt have the standard 1.3 2a in it it has a 3s scv motor with 5 spd manual in her i just wont to know what car this is out of and is 1.5 1.6 ect any info on this would be great!!!

    • 7 replies
    • 7.4k views
  27. Started by yakkmeister,

    Hello. Yakkmeister here. I have the 79 Coupe, currently powered by the venerable 4K motor. I have, on hand, a 2T motor and Celica 5Speed transmission. The 2T I have was injected, but it will be converted to carbies. I am looking at a datrally manifold for twin 40 DCOE webers. It's going to cost me ... $1600 for the manifold and carbies ... approximately. Any spares people have laying about (I don't mind rebuilding the carbies if they are cheap) I am going to be interested in. So, I have no carbies or manifold (or exhaust manifold for that matter - but that'll be a custom thing I suspect). I need to know what mounts to use (transmission and engine) What subframe…

    • 9 replies
    • 6.1k views
  28. Started by Badger,

    Hey guys, puttin a ca in my ke30 lookin for engine mounts any clues on what to use? :) i seen somewhere on here range rover mounts? but what one's -part number? any help would be good cheers.

    • 8 replies
    • 3.7k views
  29. Started by nedic,

    sorry m8 didnt no............ill fix it up for ya hey guys had alook through out the forums but i couldnt find any info bout putting a 7k into a ke30. just like to know if anyone can help me out......if the mounts already in the ke30 would fit a 7k in. Also would i need a different cross member at the gearbox and mounts??? n cause tha 7k is out of some vans or sumthing n its injected what wuld i need just 2 make it run off a carbi/webber. also the 5k. does that just bolt in?? or is there more mods that you have to do??? would appreciate sum help......once again sorry for the "sms type" spelling. cheers

    • 32 replies
    • 58.9k views
  30. Started by Isaac_TA22,

    my old ta22 has no guts, seriously, i walk faster! Anyway i need some advice, are 3t engines easy to put in a ta22? (Its got the old 1600 2t) if thats too much trouble, i was considering building a 2tg/3t hybrid Any suggestions??

    • 38 replies
    • 42.1k views
  31. Started by blonka,

    hey I'm after a couple of wiring diagrams, one for a ke35 aqnd another for a 4k, got a bit stuck with the wiring, any help would be great thanks

  32. Started by BBQ_Rolla,

    Just brought a 1987 ae82 with a blue top tiwn cam motor in it, and I need help on which parts I need and where to find them to put this motor in a ke55 coupe. Will the gearbox off the K-series motor bolt on to the motor? What flywheel and clutch do I need? Engine mounts, will Ae71 engine mounts bolt straight onto the Ke55 cross member? Do I have to storten the tail shaft? Any help will be great. Will be working on it every night and weekend. Couldn't find any threads, the search thing is no good. Pics to come soon Thanks

  33. Started by NICKYG,

    hey guys ive got a ke30 2dr and I'm undecided on which engine conversion i should do... i can get my hands on a 13b turbo or a vn v6 supercharged for around the same money, i just want to no if any of you guys have done either conversion and how much problem did u have?...i no they both make good power just wanna no which will be easier.. cheers :P

    • 30 replies
    • 14.6k views
  34. Started by Bigger Is Better,

    Hi Guys, Just wondering if anyone on this forum has any idea about mods on a 21r engine. Do 18r heads fit, are there alternate pistons. Has anyone built a 21R before and what did they use. I'm building it into a race engine for my corolla. I don't want to go down the 4AGE road as i want to run a 2 litre class and the car is already fitted with this engine Cheers Josh

    • 2 replies
    • 4.1k views
  35. Started by ke38twincam,

    Hi, i have a 1981 ke38 (ke55 wagon) which i bought a few months back that has a 4age motor in it, now when i got the car it started and ran, i had to get a battery for it as it had none once i did that the car just would not start up and just kept on cranking over and flatten the battery fairly quickly. With the car came a spare ecu that has some sort of fault in it aparently so i thought with nothing to lose ill try this ecu and the car started up and ran with no problem i tried it a few times and it kept on working. with out thinking much of it i left it over night and tried to start the car the next day and was confronted with the same problem of not starting and just …

    • 2 replies
    • 3.1k views
  36. Started by shooter,

    hey ive had a look around and a talk to some people bout what engine to mount into the ke30, was orginally siding with a 2tg with dual carbs cuz my brother is doing it so knowledge, parts, being bolt in and so forth make it easy to do but they are old getting scarce and need rebuilding. the other was the 4A's out of which the 4agze looks worthwhile,but are pretty pricey with limited aftermarket parts.Then the 4age silvertop don't know much about them but can imagine they would be on the same lines as the gze for aftermarket parts. Then the blacktop (which i can get a top end for with runnning gear)and thought might work on a GZE bottom end ( cuz it has forgies already in …

    • 10 replies
    • 5.9k views
  37. Started by Killerolla,

    Just wondering if it would be a straight forward engine swap from a 3k to a 4k or would the major mods that have to be done??? Ive already got the motor its coming out of my brothers ke70 that he wrote off.

  38. Started by emu,

    Got this sorted now Thanks Pete

    • 0 replies
    • 1.8k views
  39. Started by randomcunce,

    Hi all . iam long time reader fiorst time poster. I have a ke55 with 4kc and 5 speed box. Ive scoured the net and local resources but havnt had any luck finding extractors or elec dizzy for the peanut. I tried a place in adelaide for a 7ke efi setup and they were asking $650 computer to injectors but no dizzy. just after a bit of advice on the above. Just trying to squeeze a bit of power for now until i deciede on a new engine and box setup. cheers

    • 14 replies
    • 10.4k views
  40. Started by blonka,

    hey, ive put a 4age into my ke35 and run in2 a issue with the wiring, my issues prety much start from the positive termenal on the batery, do i need to wire the 4age alternator into the same wires as the old 4k alterntor? and is there anything that should have wires going 2 it before the alternator? if any 1 knows were to get wiring diagrams would be a big help ir just pics of what people have done here thanks

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.