Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hey everyone. The time has come to put my 4age (blue and black top) into the ke70. Having a few issued with the oil pressure sender. Was wondering what type of sender i should run? I have a guage that came with a sender and not sure if that sender will work. do i need to run a sandwhich style unit. heres a few pics. any info at all would be great. cheers.
-
- 2 replies
- 8.3k views
-
-
if possible can some 1 take or send me a picture of the timing for a ke30 1978 rolla I'm slowly doing it up but i blew head gasket n need timing numbers
-
- 4 replies
- 12k views
-
-
hi everyone, I'm new to this forum and rollas in general...i purchased a ke70 about a month ago and since then i've recently punched a hole in the standard 4KC :D i did some quick research and got hold of a 5k motor and installed the motor over the w/e in my garage with a mate....now motor is in and bolted up to the gearbox etc but I'm having dramas with vac lines etc...I'm sure some one on here has done the conversion also so I'm after some detailed pictures and perhaps some pointers on how they went about the conversion and any particular things that needed doing :S any help greatly appreciated kind regards Vardis D melbourne sc250@hotma…
-
- 3 replies
- 2.5k views
-
-
just through searching (http://www.autopartswarehouse.com/search/?Ntt=Toyota+Engine+Mount+corolla&Ntk=Main&Ntx=mode+matchallpartial&N=4294966745) i found that yanks, the lucky bastards, got ke20s with T motors, and we can buy their engine and gearbox mounts... which sounds good to me, i was just wodering if anyone knows if these mounts will bolt straight to my k motor crossmember, or do ke20 with t donks have different crossmembers??? also do t gearboxes have hydraulic clutches??
-
- 14 replies
- 7.3k views
-
-
Greetings all, you may or may not be aware that i am in the process of making my 4age ke70 legal down here in SA. Last time i jumped under the car in my mates pit we had a good look at the underside of it for anything might stick out - and think we found something. For the ae71 gearbox crossmember, which now has the t50 sitting on it, we were only able to line up and do up 2x bolts (1 each side) with the existing thread etc that was there from the old gearbox crossmember. Main concern is this is going to look bad when it goes over the pits due to them no doubt questioning the structural strength of just 2 bolts, where there used to be 4. The other "holes" in the cross…
-
- 3 replies
- 6.8k views
-
-
Hey guys, I've got a KE70 which originally came with a manual transmission (K50) 4K-C and recently did a 4AGE conversion. I've pretty much finished the conversion, but still having problems with my speedometer. I used the standard speedo cable with the T50 box and it fits in fine, but the speedo reading is about 10kmh off. It reads ~67kmh when really I'm going 60km or ~90 when I'm going 80kmh. My speedo was originally off about 5kmh with the K50. I've changed from a clock cluster to a tacho one and no change. I was just wondering what speedo cable you guys have used when doing the 4AGE swap? Can I do anything to correct the error in the speedo or is it best/ea…
-
- 10 replies
- 10.8k views
-
-
Hi all don't know if this has been asked before and sorry if it has. I am wondering would it be to difficult to change 4AFE heads from a newer motor to an older one. As i have read some forums and sites that there is a difference in the ports etc... and was wondering if i could be able to bolt on the heads from a 94-96 4AFE motor into a 90-94 4AFE block. Thanks before hand for any help.
-
- 13 replies
- 5.8k views
-
-
Hello all! I am just in the early planning and thinking stages for a conversion and I came across the Toyota Hemi V8. There is one on evilBay for $4500 http://cgi.ebay.com.au/Toyota-Hemi-3-4L-V8...1QQcmdZViewItem , and my main question was is this a realistic price for one of these motors? I would have thought that the 1UZFe would have been more desirable and therefore the more expensive motor. Also, how common are these things these days, as I am having a lot of trouble finding info on them on the net? Do many importers carry them? Lastly, are they a very good choice of powerplant. I vaguely remember seeing one in Street Machine years ago and they said it had reall…
-
- 14 replies
- 30.8k views
-
-
just curious if anyone has done it and how hard it is. thanks
-
- 1 reply
- 2.4k views
-
-
hey all about 3 months ago i put a ca18de in my ke 30http://www.rollaclub.com/board/index.php?showtopic=19426 but now i have made some changes to the car and i decided to turbo it and rebuild the engine so i went out and purchaseed a gt28rs, GTR injectors, z32 afm, pintara diff, ca18det gear box, v8 landrover engine rubbers, cooling pro intercooler, vp commodore brake master cylinder, hydroulic hand brake, s13 instrument cluster, whitline sway bars, new leaf packs, exedy heavy duty clutch, 2 litre catch can, turbotech boost controller, Xforce dump pipe, lengthened lca's, dr drift remap ca18det ecu, ACL race gasket kit and little things i can't think of. got 120rwkw at 1…
-
- 12 replies
- 8k views
-
-
New member needs help. I am in the process of fitting 2tg head to 2t block and I want to know the best way to block off the oil holes in the unused cam bearings. I have been told to just rotate the bearings but it will be an expensive lesson if it fails. Cheers Paul.
-
- 2 replies
- 2.1k views
-
-
Can any1 shed some light on what to do with fitting a hydraulic clutch in a ke36.Because ther aint much room between the firewall and the intake manifold???? cheers
-
- 4 replies
- 3.4k views
-
-
I have a '71 ke20 with a 3kc and would like to replace that engine with a 3tc. I have a te72 donor for the swap. Would a te72 crossmember work on a ke20? If not what are all my options for corolla crossmembers swap. TIA...
-
- 5 replies
- 3.8k views
-
-
hey guys, just wondering how much work would be involved in putting a 5k or 7k into my ke30? would it require work on the fire wall, trans tunnel etc? and would i alson need to get a different gearbox or could i jus stick with the 4spd it has atm? cheers
-
- 6 replies
- 13.7k views
-
-
Has anyone ever seen or heard of anyone converting a 4age to run twin carbs instead? Can it be done? How hard would it be? Cheers - Andrew :lolcry:
-
- 14 replies
- 4.8k views
-
-
hey all I'm new to rollaclub, ive got a ke20 corolla, and I'm in the process of instaling a ca18det in it. ive noticed that a few of you have got corollas with ca's in the eng. bay. I'm wondering what eng. mounts did use use,did use modify the cross member or just make new brakets to sit the motor on to the mounts?any pics would be a great help to me. plus any info on brake/suspension upgrades would be helpful. thanks.
-
- 8 replies
- 5.1k views
-
-
i have no experience or knowledge about engines so i was wondering what would be the easiest thing to put into a ke 20 i want something that can be turbod or anything like that, :(
-
- 12 replies
- 3.4k views
-
-
i have never seen a 2tg into a ae86. call me dumb or what ever but iv never seen a tutorial for putting a 2tg into a ae86. i have herd people say it has ben done but I'm wonder if it is worth it sence a 4age would be the clear choice. If someone has seen a tutorial for this could you point me into this direction cause i would like to read it.
-
- 17 replies
- 12.2k views
-
-
i have a stock '88 rolla hatch and i wanna upgrade the engine... I'm relitivly new 2 this so i dnt no what engine would fit or such... any1 tha could tell me what engine would fit and how 2 do would b much appresiated :S
-
- 2 replies
- 2.4k views
-
-
hey I'm new to this site an just brought a KE70 overrated condition done 140,000 its been lowered thats it I'm wanted to put a bigger engine more realiable an more power into my little beast, what is the easyest, conversion done so far, on whatever engine, i don't have a preference on engine so anything is ok, looking to spend under 5grand to get this done, I'm a fabricator by trade so cut an making things fit shouldnt be a problem if this helps, I'm only all the time so please help, will repay helps with big burnout on video :)
-
- 7 replies
- 3.3k views
-
-
hey guys i have a gz10 soarer at the moment and its defected i might have to upgrade the brakes and i don't realy wanna i just wanna sell it with out spending $$ on it but i don't want to loose heaps, the diff is also having some dramas as the lsd was shot.. any who i am just thinking of taking the motor, box, clutch, stereo and what ever else i can salvage for a ke70 and part off the rest of the parts and get as much back as i can. bit of a run down of parts and ideas so i can sorta toss up wether its worth it my mate owns an import yard and can help me with custom parts and mounts and shit 1ggte (stock for now) i also have a spare with no turbos front m…
-
- 6 replies
- 4.8k views
-
-
i am stuck on my conversion got a 3tgte into a ke70 got a couple of months rego left so I'm trying to hurry if noot then i wanna sell it if anyone is interested but i need help i am using the same crossmember on my ke70 82 model done my custom gearbox mount but just the egine is on a slant the front part of the engine is up and high and the back part of the engine is low so the egine is not straight and if i put the front part of the egine down then it hits the steering rod thinggy on the left hand side so what can i do do i need a new crossmember if i do then where can i get it from do i need new mounts where can i get it from ]i am locatedin sydney
-
- 6 replies
- 6.2k views
-
-
Hey guys I'm new to this website, i own a ke36 wagon, its basically stock at the moment other than an exhaust system, anyways I'm after a bit more power than the stock 3k engine has to offer at the moment, I'm a second year boilermaker so i don't have thousands to spend although i have a reasonable budget, I'm just curious on what engine anyone would recommend to drop into the wagon??? ive looked at a few engines already but am still unsure. I preferablly don't want to go injected id prefer to stay carby. Any help and advice would be greatly appreciated, cheers :D
-
- 10 replies
- 5.2k views
-
-
http://www.flickr.com/photos/27349161@N04/...in/photostream/ feel free to leave a comment
-
- 7 replies
- 3k views
-
-
i have a 2tg engine and I'm getting it rebuild. The cilinder walls took a beating and needs to be bored, but I'm trying to do it on a budget and i don't want to shell out the cash for bigger pistions. Also the pistons are still fresh looking and there the hi compresion 8.8 pistons. anyways i was wondering if i could take my existing 2tg head and put it onto a 2tc block (after boreing it). reguards, Belleci :hmm:
-
- 6 replies
- 39.3k views
-
-
Hi all, Was looking for some advice for a fule system for my 4age into ke70 and was just wondering what people think. Is a surge tank the way to go, or can i just get by with a vl inline send pump. Any help would be much appreciated. Thanks
-
- 14 replies
- 7.8k views
-
-
hey i have a ke55 rolla for autocross i am going to put a 2tc motor and gearbox in I'm just wondering if i should upgrade the diff to ta22 or are the stock axles strong enough please help :lolcry:
-
- 4 replies
- 3.8k views
-
-
iv looked everywere for info on this. 4k have valve springs that are 70lb and 5k use 77lb springs, i can get 5k ones for free but want to know if they will fit in the 4k and 3k seats?. :D
-
- 5 replies
- 8.6k views
-
-
Hi everyone i have been looking at the many options for an engine conversion on my KE30. I can get my hands on a very cheap rb20det just wanting to know if it would be legal, i know that i should be able to put a 2 litre in the rolla but does it go on the amount of cylinders or the engine capacity or both????? Cheers thanks in advance
-
- 18 replies
- 22.1k views
-
-
Hi Guys, I'm lookin at putting my efi turbo setup off my 4k onto my 7k and using a 5k head with solid lifters. The rods in 7K's are very weak so I am goin to take her apart and see what can be done. Also I read that i will need to adjust the sump an may need 7K mounts to get it into my car. Does anyone else have any info that would help? Cheers
-
- 8 replies
- 19.9k views
-
-
now befor all you old people start telling me to read the FAQ, :D shut up cos i carn recite the dam thing. Now as much as i know the K block sits on a 30 degree angel, as for using the stock gearbox it would be possible to just weld up a hollow 30 degree box and run a bolt through that to mount it to the cross member and over fill the gear box oil through the top of the gear stick (take it off and fill with oil than bolt back on). as for the engine mounts, just cut off the short one and use another drivers side mount and add a little extra steel. if the engine sits too high than instead of raising 1 side, drop the other, will have to burn that bridge when i cross…
-
- 92 replies
- 117.9k views
-
-
Hey guys i recently blew a head gasket in my 3tc powered ke30 so i pulled the 3tc out the other day striped the interior back to nothing cashed in the rego and purchased a ca18de with gearbox, ecu and loom with 200 000 ks for $300 buks First step was to make engine and gearbox mounts. sat the engine in there lined stuff and made some mounts on the engine side using stock corolla rubbers (s*#t) and i had to cut gearbox tunnel for shifter to pop up right in front of seat rail. Second step was to sort out fuel delivery so i purchased a r32 rb20 pump, vl fuel pump, stainless surge tank,6 meters of fuel line, clamps and filters.I used the r32 pump as a in tank p…
-
- 13 replies
- 22.3k views
-
-
As the title says I'm looking into getting myself a ke70 sedan to beging a ghetto/budget drifter project. What I want to do is make up a list of what parts I need before I start, so as to not end up buying the wrong things and have to spend the same or more again. There are a few questions: 1. What would be a better setup for the front suspension? I hear that S13 Silvia coilovers will fit with a little modifying to the LCA. Or would a complete set of AE86 coilovers be better? 2.What series 4ag would be the best value for money when it comes to a budget build 4AGTE? red top, blue top? GZE, 20 valve? I'm not really interested in rebuilding the engine JUST yet …
-
- 5 replies
- 5.1k views
-
-
when building the unit to keep your carb at the same pressure as the turbo boost do you have to build it to surraund the wholt thing or can it be atatched to just the inlet of the carbiy?
-
- 2 replies
- 2k views
-
-
-
anyone put a 7k into KE70 S/W ?? if so is it eazy to do ?? anything need to be changed ??
-
- 10 replies
- 31.4k views
-
-
-
Hey guys how are you all? Ive got myself a KE30 finally after looking for so long, but she needs a little bit of work to get her up to scratch before I'll pop a new motor in her. At first I was going to go 4AGZE, then 1UZFE but with all the costs involved etc I decided it wouldnt be worth it in the long run. Thing is, Ive got a Mitsubishi Cordia as well which ive spent money on only to find out that to rego it i'll need to go to regency, so I'm pretty cut about that, but in my garage, ive got 2 pretty much brand new 4G63's. They are both imported and from the Galant VR4's, with one making 220 fwkw at 15psi in a cordia before I bought. Question is this; how hard wo…
-
- 52 replies
- 39.7k views
-
-
Is there an auto tranny that will mate up to a RWD 4AGE? It's for my daughter's KE55. All I can find is manual info for the engine swap. Any others? I am also looking at a TA2 which has the auto box. Is the pushrod TA2/TA12 ok?
-
- 7 replies
- 22k views
-
-
I'm looking to putting a charger on to a 4k. i don't have a new 4k to do this too yet but when i do get one i plane on balancing the engine, shaving the head and finding a pear of extractors. just the average re-make. i have the webber for it. so whats the extra power average? :hmm:
-
- 37 replies
- 84k views
-