Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by macmacs,

    Simple question, will it fit? It's to swap in the 91 to replace the engine.

    • 1 reply
    • 2.2k views
  2. hey guys, i'll be getting my hands on a ae101 4agze very soon so i'll be also needing a t50 gearbox to slot in my ke20's tunnel. the problem is my ke20 is auto at the moment, so i'm not quite sure what direction i should be going in terms of the pedal boxes. So far my options, that i know of, are to a) get a pedal box from ke20/ke55 and convert that to handle a hydraulic clutch. (sending lines, modify to attach clutch master on it etc) b) get a us ae86 pedal box and modify that to fit into my car, reason being that a us ae86 pedal box would have the clutch master on the drivers side to allow more room around the engine c) get a fully customed pedal box w…

    • 3 replies
    • 4.8k views
  3. Started by bullet79,

    not sure about the mounts.. do i have to use stock KE70 crossmember or nissans.?? how bout the tranny gear lever.?? do i have to cut the shell..?? and what rear diff/axle to use..?? :)

    • 55 replies
    • 58.4k views
  4. Started by Old-Skool-Rolla,

    not asking anyhting abotu converting to EFI or to RWD or any of that shit. and for anyon who hasnt tried to search for info on a KE55 4AGE (or any KE model) info, your pushing shit up hill cos noone says shit about it. now i already have a KE55 4spd man. that i WAS goig nto drop a 7AGE build into. but i recently (ie. 25 mins ago :yes:) came across a AE71 fully running for a few hungy. now I'm getting it regardless but i wanna know if i can use all the parts (ie. cross member, Gbox mounts etc.) from the AE and bolt it into the KE with some minor mods to eliminate the need for custom mounts etc. plus i read the AE71 x-member bolts in and gives you some nice neg cam…

  5. hi everyone, I'm looking into getting an engine conversion done to my 1991 toyota corolla hatch, currently has a 4afe engine in it. anyways to cut long story short, I'm looking at getting a 4age silver top or maybe a black top if not too much price difference. which engine would you people think is better and what kind of price would i be looking at? also any recommended places in brisbane for this kind of half cut? haha just incase u all think I'm lazy :y: i havnt been :hmm: i called a few place in brissy today and was given a price of approx. $2400 for a silvertop halfcut. just want to know if this price is about right because ive read on this forum other…

    • 5 replies
    • 7.2k views
  6. Started by Sam_Q,

    This complete cooling guide has been massively updated however it is now hosted on my website: Complete 20V RWD Cooling Guide: A massive guide covering multiple options in the cooling system conversion on a 4age 20V engine. Has extensive details on the merits and downsides of multiple options of every component design in a revised cooling system.

    • 9 replies
    • 78k views
  7. Started by SLO-030,

    Howdy everybody, was just thinkin of possible engine conversions for the 25. the idea of the toyota Hilux 22r (2.4lt 4cyl) motor popped up as we have a hilux in the shed. just wanting to kno IF it could be done or if its been done before. I think i saw 1 in a 25 on an overseas corolla site. and most of all would it be legal, don't want the po-po on me :nervous: CHEERS Ryan

    • 10 replies
    • 18.7k views
  8. Just considering all my options with engine conversions. I thought i might try something different. Rather than the usual CA18DET 4AGE 4AGTE. I have seen a video of a trueno that had done the conversion in japan but other than that i haven't seen anyone else do it.

  9. Started by 200Boy,

    first of all *dons flamesuit* I'm not sure my 4ac is long for this world so I'm looking for simple replacement. I don't want the hassle of a 4age conversion. I know 4afc's are almost a straight swap except for a few little things which makes it a promising avenue. But I would feel more comfortable about the conversion if the engine was a 1.8L. So I was wondering how much it would take to carby a 7afe, put it in my rolla and how practical and costly this would be. I'm not too sure about the difficulty of fitting a 7afe into an ae82 period without worrying about fuel lines, ecu or looms etc. I figure there is 2 ways to go about it. 1. If a 4age head goes on a 4a…

    • 4 replies
    • 8.1k views
  10. Started by avalaugh,

    i have been searching for ages but can't find any info on putting a 3SGE engine from a '88'celica st162 into my '87' corolla AE92. if anybody has any info or links to this it would be greatly appriciated. thanks

    • 6 replies
    • 21.7k views
  11. Started by Old-Skool-Rolla,

    hey guys. got bored yesterday so stripped my KE55 ready to have the rust cut out and painted. pulled the motor out (except mounts so its still sitting in there rather than in my shed) i searched but after 4 pages of respnes like 'why don't you search' it kinda gets hypocritcal. now i got thinking about a motor into it. don't want 4AGE cos i want power :dance: so decided on a 'budget' 7AGE build. i got 20V quads sitting here, and a bigport 4AGE motor aswell.. (although i might track down a smallport head) i know all the things for a FWD 7AGE build, but no for a RWD 7A build. FWD it bolts straight in, but RWD? would it sit higher due to the extra deck heigh…

  12. Started by corolln,

    hey guys a got a ke30 with a 1200cc 3k-c was woundering what other engine i can replace it with, without enginering or any rego problems. chucking a 5k in is that any problems... please any info will be greatly appreciated.. cheers cam

  13. Started by mudd,

    Hey guys, had a look but I couldnt find any other topics that answered my questions. My friend just blew the motor in an AE92 Corolla (1.6 Carbie, 1990 model I think), so I can buy it off him for $200 bucks, as the rest of the car is in good nick I'm thinking of dropping a 20 Valve 4AGE in. Hoping you guys can help me with the following; 1. Will the engine drop straight in without any modification ? 2. Any problems going from carby to a fuel injection system wiring\electronic wise ? 3. Any other problems you guys can think of ? 3. Looks like the front cuts are around ~$1400 and I was sort of budgeting a bit over $3000 for the whole operation, feasible ? An…

    • 4 replies
    • 5.3k views
  14. Started by ke20 king,

    i was just wondering what type of brake boosters will fit up onto a ke20 I'm putting a 4age in it soon I'm just wondering what people have used with out doing much mods and where it will leave enough room for the hydrulic clutch... ive heard ke35 or ke55 boosters are good and they bolt on just wondering if thats true.. also if anyone has a booster with the master cylinder for sale I'm in nsw and let me know cheers james.

    • 21 replies
    • 31.6k views
  15. Started by xoni,

    i hav a ke70 looking for info on engine swap to 13b carbie , and what other mods other than drive line diff etc

  16. Started by Gordo,

    Hi guys I own a Ke35 Corolla Cs station wagon the body is okay woth a couple I've rust spots but other wise in good condition. I would like to drop a rebuit T-18 in it to give it a bit more hp - does anyone know of a place here in melbourne I could have the work done. I know cross member specs and gearbox need to be change and i don't have the facilities at home to do the work - so ig anyone knows where I would gladly appreciate it - money is not an obstacle thanks Gordo :abuse:

    • 0 replies
    • 1.4k views
  17. Started by hilux05,

    hey guys. i know squat all about the old rollas pre e7's so i thought maybe some one here whos done it before may be able to help me!! yes ive tried looking but i just can't find anything even in the faq's. I'm thinking about pulling apart my ae71 with 4age and all that other shyte and put it into either a ke20 or 55. what i need help on is: will an ae71 x-member fit? if not i have 4ag-to-ke70 steel mounts, is there a difference between 20/55/70 k sreies x/members next is will an ae71 pedal box fit obviously so i can use the T50 or is there a different hydro pedal box that will fit easier?? I'm sure i will think of more questions in the near fu…

    • 0 replies
    • 1.9k views
  18. Started by toyota_ae71,

    gday ya'll ive found meself a bit of a deal on a rebuilt 18rg twin carb and a 5speed for $800 and was wondering if it would be possible to put it in my 1984 ke70 with mods of course but has it been done before?? cheers corey

    • 30 replies
    • 29.7k views
  19. Started by gringogti,

    hi all at the moment i have a 1.6 gti 16v which i will soon be converting to a 20v black top engine. while the transfer will be taking place i will also be having a custom exhaust made with a custom 4-2-1 manifold as they do not make one for my car :P (not going to be cheap) just thought that i would let you all know and will get some pics up as soon as it starts taking place.

    • 5 replies
    • 6.1k views
  20. Started by Palmy,

    i canned the idea of doing an engine conversion a while ago due to lack of funds etc. but i am now just wondering why VN V6's are a popular option? why not an ecotec? is it cause of cost? size? electrics?

  21. Started by ke20 king,

    does any1 know any1 who makes engine mounts for 4age conversion in ke20 also do you know if the ke30 have the same crossmember if any1 knows any1 or have 4age/ke mounts please call me on 0413490692 i will buy from anywhere as I'm desprate cheers.

    • 6 replies
    • 3.6k views
  22. Started by mundawg,

    hey guys i just recently done a 4age conversion into my ae71... I'm having problems with my alternator, it wont charge my battery, the charge light just comes on in the dash and it will just run dead my battery...just wonderin if anyone has ran into this same prob before and could help us out.. cheers

    • 2 replies
    • 13.2k views
  23. Started by ke55_1GGTE,

    Hi all just registered here. I'm doing a 1GGTE convo in me rola. hopefully some lads here can help me with diffrent questions. looking at R#! front disks and calipers, R#! cut down diff with disk brake ass end. if any1 here has any info on this convo please don't hesitate to share ya wizdom. Thanks all Peter.

    • 17 replies
    • 10.6k views
  24. Started by *Andrew*,

    I've been searching the site and google to find out what needs to be done and the costs involved to engineer/comlpy/register a k series corolla with a 4age. So far i haven't been able to find much. Has anyone here had their conversion legaly aproved? Or does anyone know who to contact to find out exactly what's needed and costs? I've made some phone calls but all i've been told is i have to put in an aplication to modify form (or something like that) and take it from there but i can't as i'm trying to work out how much it's all going to cost before i buy a car and start the project.

    • 5 replies
    • 55.7k views
  25. Started by ae71 csx,

    hay guys i need to get the wiring diagrams for a 88 model ae82 bigport corolla. asap if possible thanks guys. any info will be muchly appriciated

  26. Started by ACDFS,

    I have a corolla SR5 AE86 but the engine is a 1.3, looking to upgrade to a 3S-GE, can it be done and if so, are there guidelines or notes to it and pehaps a how-to online?

    • 3 replies
    • 3.6k views
  27. Started by tolisspi,

    I have the opportunity to have a clutch disc exedy 6puck strong for 350hp and 50kg torque (i think). The diameter is 212mm. So if i want to fit it in my 4age 16v (bluetop) i have to change also the clutch cover, bearing and the flywheel? Its worth something like that to "pass" the hp on the wheels? How many hp (%) can i pass with this mod (if its possible to counter it)? If i buy clutch disc, cover, Light Weight Flywheel, and bearing, i think to cost me 1000$AUD This moment i have TOYOTA OEM parts with clutch disc 200mm(i think) Or do you think it worth to fit a clutch kit, flywheel aftermarket (e.x. exedy or toda) with diameter 200mm, there would be a noticeable ch…

  28. Started by KE555k,

    Hey guys. I did my 5k ---> ke55 conversion yesterday, i was putting my 5k out of my ke30 into my ke55, anyway it all went relatively smoothly for a first time conversion. One problem i have is, with the gearbox selector, when i move the gearstick it wont go into any gears, it feels like its just stuck in neutral, it wont move forward or backward, just side to side? Any ideas at all? Also, when i bought the car the guy told me that the exhaust ports were all polished but the inlet had a sort of roughness to it, supposedly to produce turbulence and create a better air/fuel mix? is this normal? i've never heard of it thats all? Also, when i take my head …

    • 8 replies
    • 3.7k views
  29. Started by ke rollin 20,

    hey all, iv currently got anouther ke11 for a little project, its just in for a respray and a new engine an some other minor things, basically i don't have any idea on what engines will fit in to the ke11 model other than the 5k, 7k, and I'm after something with abit more power but i don't want it to set me back millllions and i don't want to chop up my firewall an that, i really want a turbo engine an don't want to rotor it, so iv hada sus around on here and and I'm looking at the ca18 but just want to no if people have done it and how much the engine set them back and anything else that was needed eg. engine mounts an gear box. any pics or info and price…

    • 10 replies
    • 4.4k views
  30. Started by llawgoch,

    hi, i have searched the site but can't seem to find anyone that has put a Non-TVIS 16v engine into a 1998 corolla which had a 4afe. has anyone done it?? i am doing it on mine and would like a little help on the wiring. i have all the diagrams including all the toyota electrical books on the corolla. there seems to be a hell of a lot more wires on the 4afe than the 4age so i dunno what has to be used an what not. any info appreciated

    • 4 replies
    • 5.1k views
  31. Started by Mybowlcut,

    Hey. I rang up some wreckers to see if I could find a 4A-GE engine. I found a guy that says he can get one in with the gearbox, computer and everything so I could drop it into a KE70 for $2000. Just wondering if this is a typical price?

    • 42 replies
    • 13.8k views
  32. Started by AE82 rolla,

    well hi, i'm new here, and this may have been done before idunno, i looking at putting a 4AGE into my AE82 corolla, i was just wondering if there are any good sites/books on rebuilding these engines, and then if anyone has done one of these conversions, how much work is involved in them?? sorry if this is elsewhere, but i used the search thing and couldn't find much any info would be much appreciated. thanks in advance..

    • 15 replies
    • 19.3k views
  33. Started by benzo,

    Hi, as some of you may know I have wanted to do a rotor conversion on a KE20 for a while. My ke20 is for sale, and I am buying another. This will be the donor for the rotor conversion. I am going to drop in either a extend port or bridgeport 13B with the intention of 130rwkw, however I am unsure of what gearbox to use. I have been told to use a S4 turbo 5 speed for their strength, but is there another alternative capable of handling this power with alot of abuse, such as a Corona 4 speed (4 speed would be cool lol) or 121 5 speed. Something narrower and shorter than the S4 box would be ideal I suppose. Cheers in advance, Ben.

    • 11 replies
    • 6.3k views
  34. Started by machg,

    G'day, if someone on here has done a 4age into a T18, can you have a look at my post ("lazarust") in rides and projects and help me out (if you have any pics, it might help). The mounts in the pics are AE71 mounts, and everything seems to line up. Cheers, machg

    • 0 replies
    • 3.5k views
  35. Started by inapickle,

    hi guys. have just joined. have found heaps of usefull info. Have just brought a ke30. have been looking at engins to put in it was thinking of a nissan vq20det or vq30dett. I want a v6. any other ideas. can anyone see any major problems i will have

    • 30 replies
    • 14.2k views
  36. Started by ke20 king,

    just would like some info with putting a 13b into a ke20 neva done it and would love it if some1 who has can help me with ways of bolting them up, etc cheers.

  37. Started by machg,

    Anyone put one into an early corolla? Lots of potential, I rekon.

    • 4 replies
    • 2.2k views
  38. Started by weclnu,

    hows it gota 4agze ke30 and want to get rid of the supercharger , can i just bolt a new inlet manafold on and plug in a 4age computer to my loom??

    • 14 replies
    • 5.6k views
  39. Started by kes.16v,

    Hey Guys and girls, I'm new on this forum but i have been a member of SRC (sydney rolla club) for awhile now, i drive a ae82 but just got given a KE55.. i have some good plans for this car including a full restore of the body and respray and also tidy the interior up... but my big question is the engine that I'm wanting to put in it.... i have 2 choices.... a CA18DET or a 4AG(T)E...... I'm not after massive power or anything like that just some nice boost action lol.. i need help on which engine is the easiet to fit... and i also need to know what modification needs to be done to run either of those engines... i have done some research, and if I'm correct …

    • 8 replies
    • 3.7k views
  40. Started by morgz,

    i have a ae92 seca like most people out there, its got the carby 4afc running, and basically its on its last legs, I'm debating as to whether or not to chuck a new, efi engine, such as the silvertop 20v into it. yet I'm wondering if the price of converting a carby car to fuel efi is worth the cost? i know there is the issue of wiring and the like. so i wasnt sure if its going to be cheaper to buy a seca sx and just chucking the 20v into that, which would be the most cost effective option? i was also thinking about placing an 'e58?" gearbox in, as i heard it gives you front lsd, not sure if thats true, any help would be greatly appreciated, thanks

    • 16 replies
    • 8.2k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.