Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hey guys I'm currently in the middle putting an sr20det into my Ke70 this is my first conversion and i am trying to do most things myself. Any helps or hints To do with anything that can help me with my conversion would be great. Referals to Info on people who have don't this conversion before so i as i can find some better ideas for mounts and stuff would be awesome. If people have parts also which they think would help me out then let me know. what i have all ready: -Fully stripped drift ready Ke70 rolling shell. -sr20DE, Loom, ECU, Comp, Turbo injectors -gear box -FMIC + Piping -Boost Controller I Have all the equiptment i need to…
-
- 4 replies
- 4.5k views
-
-
Hey guys, I'm new to the forum. I have a 94 seca rv, and just bought an 81 ke70 and rolled 83 Corona with a cammed and twin webbered 18rg and 5spd.. Will post pics soon as i get around to it. Anyway, was looking at slapping the 18R outta the corona into the ke70 for a bit more more poke. I haven't had time to get around to measuring anything up yet and thought I'd just ask to see if anyone had done this and if they could give me a few pointers to save me time... -Can I use the engine mounts and gearbox mounts? -Can I use the front discs and calipers? (I haven't looked but id imagine they are bigger!) -What are the upgrades needed to pass regs in qld? …
-
- 3 replies
- 9.5k views
-
-
As tittle says I'm looking at getting either a 5k or 7k for my ke70, Just wondering what extra cost apart from buying the motor? Do i have to change exhaust, gearbox or more for the 7k?
-
- 2 replies
- 2.9k views
-
-
Hey all I feel really stupid asking this but i have my extractors on my 3k-c and soon i will be looking for a 7k will i be able to use the same extractors or will i have to get new one's because my dad told me that the 7k has a different manifold pattern Thanks for your help Lukey :jamie:
-
- 9 replies
- 6.1k views
-
-
Hello I am new to the rollaclub. I just bought a 1970 KE17 Sprinter with an automatic :P . I do not want the automatic of course. So I was thinking about dropping a 2t/3t with a t50, will these be easy to do? I know the easiest would be a 4k or 5k modified with this cars 3k head? and twin side drafts with a t50. Does the t50 need to be modified as far as cross member and tail shaft ends? I definitely will upgrade the front supension with something later that has disc brakes on it and a later rear end from a later corolla model. So what is the best suspension and brake upgrade? How about dropping a BMW M10 motor and tranny? I have three of them in my garage So th…
-
- 1 reply
- 3.5k views
-
-
Hello to all members. I'm new to the site and club. I recently purchased an 81 corolla coupe and I want to begin a v8 conversion and was wondering if any one here can tell me where to begin, any ideas and or problems I will occur and any resolutions to them. I kno there will be alot of fabrication on my part but I'm hoping some here has been there and done that and can help me out here. Thanks
-
- 10 replies
- 12.6k views
-
-
i need help ive got a 12a motor and rx7 s2 gear box and i wanted to no if the gear box has to sit 100% level becasue other wise the gear stick will poke out were the hand brake is ke55 with rotary
-
- 3 replies
- 3.3k views
-
-
Thinking of putting a 20v into my 92 corolla. What are your thoughts? Are they a quick little car with the 20v engines? cheers
-
- 4 replies
- 4.4k views
-
-
I have to fit Jips old tabitha KE30 motor and gearbox 5K 5 speed into a overrated KE17, i don't need to know about wiring exhaust etc but more about gearbox and engine mounts, tail shaft, gearshift hole, any help much appreciated, thanks Curly
-
- 11 replies
- 4.9k views
-
-
as the title suggests i am trying to get a 3sge (gen 1, from st162 celica) into a ke55, and i was thinking of trying a tarago gearbox. The tarago is a 1985 model, has a 2c diesel engine and perhaps a g52 box? (i can't confirm this but the second gear ratio is 2.333, and going by this list http://www.geocities.com/motorcity/pit/997.../Gearboxes.html the only 5 speed with that is g52, though I'm happy to be corrected). So far the bellhousing that came with the 2c has bolted up to the 3sge (the flywheel from the st162 is a bit thinner then the one off the tarago, I'm currently cutting the front of the bellhousing back so it will work hopefully) But technical issues a…
-
- 2 replies
- 10.1k views
-
-
i am tossing up what would be best, 3tgte or 4age turbo for a ta22. both are about as easy as each other to put in. 4age would be cheaper but what would go better if and equall amount was spent on either motor? iv heard alot about 4age's but know very little about 3tgte's once done up. ????
-
- 19 replies
- 64.6k views
-
-
got a ke30 2 door and looking to do a sr20det conversion. but thought id throw this qeustion out there before i started! what would be the simplist conversion for a ke30? wen i say that i mean is there any good powerfull engine that will bolt straight in? what would be one of the easeir conversion? is there any? I'm only lookin to make about 100 - 140rwk anything around that ill be happy with.
-
- 8 replies
- 16.6k views
-
-
Hey guys I'm a car noob with a rad rolla......but theres just somethin wrong with it, its a blacktop 20 valve in an ae92.... i got it a full servive after i bought it, but its running at about half its power and is using shit loads of fuel. and its not the airlfow meter. anyhelp would be awsome cheers
-
- 3 replies
- 2.8k views
-
-
-
Hi all, I'm in the process of putting a 4agze into a 55 coupe. I've searched and read a lot of posts about custom mounts for a 4a into a Ke. It seemed easy enough. The passenger side mount was too easy, but the drivers side is proving to be difficult. The Sc hits the rubber mount (the middle hole is the one, i would like to use the top left hole but as you can see there's no chance in hell) Are there any pics out there (that i can not find) of a 4agze mount for a KE crossmember?? Can anyone offer advise?? Also, At the moment I'm using rubber mounts from an AE86, they were lying around, very thick. I'm thinking of using a thinner (maybe smaller) rubb…
-
- 0 replies
- 5.1k views
-
-
Hey guys, Just a thought, Whats everybodys opinions on fitting a 2L pinto engine out of an escort into a ke 20/30? I drove a MkII esky ghia for a few days with a 2L and aside from being auto it went pretty good. Id say 20's and 30's would possibly be lighter than the escorts. Anybody else had an idea like this?
-
- 20 replies
- 11k views
-
-
hey people's, i have recently purchased a 2 owner white ke70 and it is an auto. Before you mention the search button - yes i have tried. I am just wondering if there are any other options of diff ratio's available other than the 3.9 and 4.1??? Its just that i do a few k's on the highway every week for work and don't like the idea of it revving its tits off (about 4k @ 100kmph) I do have an almost complete manual conversion kit but i really cbf doing it because later down the track i may do a blacktop conversion and wouldnt want to change the pedal box setup twice from a cable to hydraulic clutch. any help would be appreciated thanks in advance . . . Jordo
-
- 1 reply
- 2.9k views
-
-
I want to hook up a 4age on to the auto (4sp O/D) in my AE82. The starter motor is in the right place, but what about the bell housing, flex plate or anything else. If anyone can give me some good advise it would be much appreciated. Cheers James
-
- 2 replies
- 2k views
-
-
-
as the description says, i have a 1st gen rx7 axle that i would like to run on my ke30, that is running a 13b turbo, please let me know if it can work :D i work alone so it would save me some hours :bash:
-
- 4 replies
- 5.2k views
-
-
-
Hey guys, I have a 73 Corolla Hard Top Coupe which we have had in the paddock for a while just for fun. After siezing the engine the other week (didn't bother with any oil) I figured it might be worth while to get the beast back on the road with a newer, more powerful engine. Now, I don't want anything stupid but I would like a bit of power. The car will be a casual driver, once or twice a week will be all she will be driven. Any thoughts on what engine to use? I have thought 4AGE or 4AGZE and have heard this would be fairly straight forward. Was this ever in a front engine rear wheel drive car? It was in old MR2s but they are obviously mid engine. 3T was also…
-
- 5 replies
- 16k views
-
-
hey people iv looked up every where seeing about the rb mounts used for the conversion do u just use the ca18det cast mounts with the rbs rubber mounts or have to change solid mounts to rb mounts as well tried to find some info but no luck Thanks qckrolla
-
- 2 replies
- 2.8k views
-
-
Ok so been scaning the net for the last several months, trying to sorce as much info as i can, basiscly i have a 1980 ke55 , my daily driver, i want to put a ca18det into it ,I'm finding alot of conflicting info and people have done this and done that ,can't seem to get the whole picture tho ,so can any one who has done this or has a mate with this done offer up some info to clarify what ive learnt so far??? so this is what i have : the ca18det will fit into the engine bay no problem, as for the engine you just have to make up engine mounts to fit to the standard x-member????????????????????????? you don't have to cut the firewall or the tunnel at all when using…
-
- 9 replies
- 15.8k views
-
-
hey guys. had a few new hiluxs come through my work recently and i thought about maybe looking into the engine out of one. 2TR-FE, 2.7L 4 cylinder. not sure if diesel or petrol. thought i new torquey motor would go nicely into a KE70/AE71 any thought and more information? cheers guys
-
- 8 replies
- 19.7k views
-
-
Hi all you rev heads. I'm wanting to throw a few ideas around regarding an engine conversion I'm looking at undertaking next year. I've got this pretty little TC Gemini coupe laying around that I've ripped out the gutsy G180 and 5 speed to make way for... something... I've been thinking about chasing down a 3SGE BEAMS engine and 6 speed for her, but wondering if it's worth the time, effort and price. Maybe a 4AGZE might be easier and cheaper??? Or a 3TGTE (considering I got one sitting there, and already building one for my T18...) or even a 2TG? Any wild ideas welcome, but please bare in mind, I want to get it street legal, so the max capacity I can go …
-
- 50 replies
- 75.1k views
-
-
Hello, i am doing some research on corolla motors and have found some interesting stuff about them, i have a suzuki 4wd thats been converted to a 4k (thats what it says on the rego sticker). i bought the car of a wrecking yard with no motor, just corlla 4 speed box and heaps of spare heads and stuff. i was just wondering why heaps of people choose the 4k with 5 speed and not the 3k/5k with 4speed/5 speed, as i would really like to put a 5k i have in it. cheers
-
- 8 replies
- 51.5k views
-
-
hey guys, We are planning on fitting an 18RG into a Ke20. We no they are heavy etc etc, but we are set on fitting one, as we have all the parts an resources to build a 250hp motor. At the moment is we are trying to work out the best method to mount the 18RG into the crossmember. Are there any standard mounts we can use, or are we going to have to build custom ones??
-
- 3 replies
- 7.7k views
-
-
just wondering whether its possible to put a 3y out of a liteace van into corona wagon that originally has an 18r in it? any help would be greatly appreciated thanks :bash:
-
- 5 replies
- 4.1k views
-
-
Hi , I am almost done with my smallport 4age conversion into a ke70 corolla. I was reading the witzl's guide on another forum on the water outlet modifications. Why do I need to do the following because the FWD engine already has a thermostat all hooked up and as far as I know its not in the way of things forgive me for being a noob! # Maintain the original FWD water pump and associated pipes etc. If you bought the motor from an importer or the like, remove the water pump and replace it (recommended highly). # Take a remote thermostat housing (complete) from an AE82 4A-C (run down to your local self serve wreckers, cost $10) # Get yourself the flat type rea…
-
- 22 replies
- 10k views
-
-
i hope some one can help i am looking for a 7k efi manifold is there a place that sale or some thing thanks tom
-
- 1 reply
- 2.8k views
-
-
-
-
Hey Guys I have a 1999 Toyota Corolla Conquest and am looking to do an engine swap. Does anyone know what engine will go into this fairly easily, and reasonably inexpensive but still give good power? Or am i better just to modify the existing engine? The car needs to compy with QLD P Plate laws so no turbos or superchargers. Thank you for any help you can offer. Bob
-
- 8 replies
- 23.1k views
-
-
hey guys, I'm in the process of buying my first ke70, its a 5 speed and just wondering what are some of the minor mods i can do to get it running better then stock?. thanks.
-
- 2 replies
- 2.3k views
-
-
is it possible/easy to put an engine from an unleaded liteace van into a diesel tarago van?? i know this isnt about rollas but figured someone might know if its could work
-
- 2 replies
- 2.6k views
-
-
hey guys i know theres plenty of threads on the various things I'm going to ask i just need any general help and advice on this BEFORE i make mistakes! ok this is the deal, iv just bought a 82' ke70 no rust! 160000k's i will be setting this car up for track use, mainly drift though, and the odd sprint or whatever, iv decided on the ca18det, reasons, the price is good, fits easy, plently of go-go etc i know I'm going to need: -limited slip diff (and i will NOT be welding up any standard ones) -roll cage?- will you be allowed on track without one? -need some info on a suitable tailshaft, or modification to the original -info on engine mount modificatio…
-
- 6 replies
- 3.9k views
-
-
Hi all jst got my ands on a wrecked ae92 and planing to do a full converison into my daily ae95r wagon. has it been done on here before? if so can someone point me in the rigth direction, plans are to strip it all out adn exchange it with all ae92 sx parts, engine interior brakes dash but not sure if the power steering will fit, since the 4wd doesnt have power steering. any tips and helps would be much appreciated, toy-ae92
-
- 5 replies
- 4.4k views
-
-
hello I'm about to do the all known convertion i know i was already in the 4age into ke70 convertion but i need specifique details 1.can i use the igntiter module and ciol from the 4afe?because I'm kinda the only person I'm my country with that engine and i can't go to toyota to buy parts for the 4age cause they don't know about this one 2.heres a couple of pictures of the engine iknow its a red top but can you tell me exactly what do i need to change exept the manifold cause thats been taking care of http://picasaweb.google.com/yohannquaziz/E...ey=BuIZLieSvmI# thank you very much.plz don't delete i really need some help PS.of course i know i need the gearb…
-
- 12 replies
- 14.8k views
-
-
I have an automatic trasmisión 2speed to pawerglider of the motor 3k, that I can make to transfer but to pawer to the kw with that model, said to me that 2t- 1973 - 1974 adapts one of the model - 2speed not if it can. if it could that I must do I will be thankful for the aid thanks
-
- 6 replies
- 4k views
-