Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hey guys, planning to do a drive line swap in my ke70. would just like to know what i will need for the conversion. engine is a 4kc, planning to use either 4 or 5 speed man box. I'm guessing, for the conversion, i will need -box -tailshaft -pedel box (or just the clutch pedel itself???) -clutch, pressure plate, flywheel, thrust bearing (all which i will more or less buy brand new or in a kit form) -starter motor??? -spigot bearing (are they diff between auto and manual???) now, i have done a few conversions on other cars so its not out of the ordinary. I'm just tryin to get everythin together before i start this. ide like to know exactly what else is…
-
- 10 replies
- 7.5k views
-
-
-
Hi I'm new to here just a quick question if anyone would no the best motor to put into my ke 55 Thanks.
-
- 8 replies
- 3.3k views
-
-
just wondering if anyone knows what type of turbo engine that would b good 4 a ke55 corolla cheers
-
- 14 replies
- 4.7k views
-
-
Hey guys i am currently running a stock 4k in me ke 11 and its getting a lil tired and will need to be replaced shortly and i have a got a twincam 1600 out of an early celica and was woundering weather to put this in or know if anyone has put one in before. Also just woundering what yous think would be a good replacement???????
-
- 2 replies
- 2.6k views
-
-
Hey i have a ae102r with a 7afe engine no modification and lately it has been chewing through oil, so i am looking at what my options are to remedy this problem. Has anyone had experience with this type of engine/car? I would like to gain some power if possible but if its going to be a huge job ill just get the 7afe re-built. I'm wondering what engine swaps are possible both legally and practical.(I live in NSW) NOTE I'm trying to be realistic i drive this car daily!
-
- 10 replies
- 11.1k views
-
-
hey guys was just wondering whats the go with a 4age on red ps in NSW if its illegal etc also if i get a 4age what other parts do i need to successfully install it is a stock 4kc gearbox alright etc? and what price range am i looking at cheers :D
-
- 1 reply
- 2.8k views
-
-
I'm new to Rollaclub. About to put in 1ggte 5 speed into a ke30 chasing brakes upgrade suggestions. Cheers! or any suggestions about the whole project really.
-
- 1 reply
- 2.7k views
-
-
I'm thinking of sticking a 4age in my ke20.. Ive had a look around here but i couldn't really find much information, but if there's something out there i would much appreciate someone link it to me. But for now i have a few questions 1. Is it legal? 2. What extra parts/modifications i would need? 3. A rough idea on the costs I'm aware of the obvious brake and suspension upgrades, and i already have them covered. any other help would be much appreciated :laff:
-
- 2 replies
- 3.7k views
-
-
-
Hey, I am interested in buying a KE30 4 door. I was wondering what engine i can put in it, and if i can do it legally. If you could give me some prices as well for how much it would cost to get engineered, and insurance if it's possible. (doubt it) What years did KE30 4 doors come out in? like 1976 to 1978? Oh, and whats the difference between the KE30 SE And KE30 CS? I live in Adelaide, South Australia. Thanks.
-
- 7 replies
- 7.4k views
-
-
Righto guys. I know that this topic probably has been breached many many times. BUT. I've read as many topics as i can find and its an information treasure trove but i'd like it if u could all answer my question. So the deal is. Ive got an AE92 sedan. It's got the 4age stock engine. Soooo my thinking is easy as conversion to the 4agze. Take off the supercharger and move to a 'fist sized' turbo. Lets not talk about the intercooler and extra attachments. My main questions are Parts? Are they readily available as this will be a daily driver. Rebuild? I think unless i can get a good engine history then i gotta rebuild straight up.... Source? Is it better…
-
- 4 replies
- 4k views
-
-
hey guys the other day my 4a started making some nasty bottom end noises from cylinder 4 and i don't have any money but a mate of mine has a 3a-c engine at his house, i was wondering if it will fit my ae82 untill i can get the 4a-c rebuilt. thanks Ian
-
- 3 replies
- 2.4k views
-
-
well anyways I'm totally new to corollas..as of my new project that i just bought is a 1974 corolla, KE20. and i really want to throw in a sr20 on it, but my problem is that i am a big time civic fan and know nothing about rwd. can any one help me with the fiting i need and clearance for sr20 in a kE20. and what kind of wiring will i need. My biggiest concern is motor mount, and clearance. i done engine swap a lot so i m familiar with pulling motor out and putting it in.
-
- 3 replies
- 3.7k views
-
-
hey thanks alot for your input ppls on my last thread about a 4age engine, I'm more keen on a vn v6, because they go pretty well for what they are, an i want something thats going to be just wrong on the raod LOL, anyone done the conversion vn v6 ??? an what problems u reckon i might run into, thanks heaps everyone i really keen to start this project too, will be posting adds along the way to help more people convert this engine ?? any advice will be much helpful thanks
-
- 26 replies
- 14.1k views
-
-
hey i have a ke70, i wanna do a engine conversion to make it a bit of fun, I'm a fabrictor by trade an making stuff or anything with metal isnt a problem, i juts wanna know what is a powerful engine an easy to convert, that wont take forever like some cars, it will only be a car to work an back, but to have fun on the way, money isnt a issue, just want it to be fairly fast, i need a choice of engine ??? an want to make the engine put out around 200kw, any help pls with a type of engine that easy to put in an make 200kw thanks guys
-
- 7 replies
- 4.1k views
-
-
Hi guys, I'm looking at getting a ke10 or ke20 and wanted to look into what conversions there were available. I don't want to put a older engine in there but i do want a turbo. I was looking at the sr20 and was wondering if there was much support for this? Also if anyone has experience on how difficult it was to do and any recommendations. If there were any other engine conversions that were good reliable engines that were easy/cheaper/ and less hassle to put in id definatly want to hear what you think. Much appreciated! Cheers Adam
-
- 14 replies
- 21.5k views
-
-
hey guys and girls, I'm doing a bit of research, and i can't find the info needed. ive searched heaps and heaps, but How hard is it to put a 20v (silvertop) into an AE101. I read somewhere is just bolt/plug in, but could it really be that easy? Would the a/c and power steer still work? (i assume you use the 20v parts) I was going to get a front cut, so i could get all the wiring, and the ecu, etc. Is there any more info you could help me with? Thanks heaps for looking, any help would be appreciated! Joel
-
- 1 reply
- 11.8k views
-
-
Hey people i'm pretty new to this but here goes i've just recently bought a 1974 celica and was lookin to put a turbo engine in it i was lookin to get a 3tgte engine but i can't seem 2 find the engine anywhere is there any other engine yous could suggest? and a rough estimate on how much it would cost would be really appreciated? :y::D:D:D
-
- 21 replies
- 19.5k views
-
-
just wondering if anyone knows if a 1ggze will fit into an 80' ke55
-
- 4 replies
- 3.4k views
-
-
hey guys/girls I'm new to the corolla forum so i don't no if there is already a thread up here about this and if there is could some one point me in the rite spot to find it I'm sure someone or many people have done it. i have a 12a with 5speed seires 4/5 box that I'm about to slot in my ke30 can any one tell me if it will fit or do i have to mod my gearbox tunnel? and also any hidden extras i might of forgotten about i have built a few custom cars before so I'm not scared to chop stuff out i would just like to no first any help would be great thanks Steve
-
- 14 replies
- 20.6k views
-
-
So I'm buying an 85' corolla SR5 i'm pretty sure is what it is and I have been searching for parts for it and i can't find anything i know it has the 8-valve 4a-c engine in it and i was wondering if anyone knew where to get some parts for this car at or should/could i just swap the engine for a Gec?? which would be a better idea?
-
- 3 replies
- 3.3k views
-
-
while reading another post about putting an FJ20 into a KE10 (not a good idea) I noticed a few comments on the Mazda BPT engine. ....Not an easy engine to find un biased info on. Any ways can someone give me the word on these engines. My bosses have an MX5 race car with a few spare engines, anyways, to make space they gave me 1 (in pieces) clean fresh and ready to ride ... I'm not sure what to do with it. I also have access to a box, loom ...etc... Cheers
-
- 13 replies
- 24.5k views
-
-
:S any body know if it will fit in a ke10 or if if can be licenced?
-
- 11 replies
- 8.3k views
-
-
Ahh.. the beauty of a twincharger.. is having a smallish capacity engine that has effortless acceleration and feels like a larger engine due to the low end boost from a supercharger, yet has the ability to ram copious amounts of air into the engine for awesomeness and top end power from the turbo. YET be able to turn the s/c off for fuel efficient naturally aspirated motoring at cruise and idle :cool: I see this as a performance ideal we will see more of in the future as engine emissions and also engine capacities will be getting more and more restricted. i've been doing a bit of research into this as I'm seriously keen to build a 20v twincharger in particular myse…
-
- 36 replies
- 322.1k views
-
-
Hello guys and girls. Newbie here looking for some info on putting a small turbo on 4A-FE engine. Firstly has it been done before? and secondly can it be done?... I was also thinking bout an engine coversion later on. BUT what i was thinking was to use a turbo and manifold off a turbo starlet or something that would match the 4A-FE head and upgrading the fuel system slightly. Is there an injector upgrade for this engine? Also would it be worth remapping the ECU? I'm not looking for huge numbers here just a bit more power and torque so i can have some fun with it. Any info would be much appreciated. thanks
-
- 9 replies
- 17.2k views
-
-
Hi guys I'm new here. I have seen a couple topics regarding this already but would like to make my own to get my own questions solved here. First off I have a 94 Corolla DX with the 7afe in it. What parts would i need to make a redtop conversion on it. And where could I get them all.
-
- 9 replies
- 23.8k views
-
-
hey lads need to find a freal good workshop in adelaide to get some work done and suggetsion for my overrated ke11. Any suggestions? Thanks Russ
-
- 5 replies
- 3.7k views
-
-
Okey dokey for all you experts.... i would like some advice on turboing my 20v. what would be a good compression ratio to aim for and how to achieve. there is a guy in the states though with a rotex charger running stock internals. but has ported the exhaust side and is running 15psi and has been for 9months. i reckon that asking for trouble with such a high comression ratio. i want a decent power gain in the region of 150-160kw atw. but i don't want to lose off boost driveability. cheers, Luc
-
- 30 replies
- 8.1k views
-
-
G'day all, I am looking at purchasing a KE11 with a busted donk. I am new to corollas and cars in general (been doing the bike thing). I have been doing some research on engines for a KE11 and have decided the CA18DET looks like the one for me as I have read it is simpler than the 4AGZE as its setup for RWD already. What problems would I run into during the install apart from obvious things like new mounts etc. And does anyone know if I'd have a problem getting a KE11 engineered with a CA18DET in QLD? Cheers Mitch Edit: I am looking to do the easiest/cheapest (if this exists) engine swap to make the KE11 a bit more fun.
-
- 7 replies
- 6.9k views
-
-
Hi all i just bought a 82 KE70 5 speed and i am looking at a heart transplant on the cheap. a mate of mine has an L20 their willing to part with for free and i am wondering how straight forward this conversion would be??? any help would be much appreciated :D
-
- 14 replies
- 9.3k views
-
-
Hey all, I am considering putting a Mitsubishi Saturn or Astron motor into my KE20, because I may be able to get one dirt cheap. (and know that parts are plentiful, along with a nice power output) I have had a search, and was not surprised that there were no matches. Could anyone who has had experience with these engines PM me ? I am trying to find out a few things about the conversion, so it would be great to chat to someone who has had experience with these motors. I understand that engineering will most likely be necessary (if i am to keep it all legal). Thanks, Dougal
-
- 24 replies
- 17.4k views
-
-
Well firt of all I am new to the rolla club. I just got a 1973 ke20 with the 3K engine and tranny. However I just picked up a 2TC motor nd 5 speed tranny includint tranny crossmember and driveline. Also got a set of 44mm mikunni sidedraft set up for a 3TC. How hard would it be to swap into my KE20 and what thinggs would I need. Great site by the way fellas.
-
- 3 replies
- 8.9k views
-
-
i wanna know do you have to change the clutch cos rolla clutch is cable ta22 is hydraulic :D
-
- 5 replies
- 4.3k views
-
-
hey everyone just out of interest did the AE86 toyota sprinters come out with two types of motors eg twin cam 4age and or some form of single cam motor. if the single cam what are the stats of the engine and pros and cons over the twin cam. thanks dean...
-
- 5 replies
- 5.4k views
-
-
I found a Hyperpak module on Flea-bay and it looks to be the answer to my prayers, a magic box that gives the 4AGE dizzy an advance curve so no need to run an ECU. Has anyone on here used one and can say what its like ?
-
- 5 replies
- 12.5k views
-
-
Hello everyone. I am currently researching the best (simplest, least fabrications) method for inserting a 4AGE (either 16v or 20v) into a ke-30. I have discovered a distinct lack of a definitive guide on the subject. There would appear to be a million ways of doing the same thing with none being entirely compatible with each other. Since it seems to me that the engine bay and cross-member is shared up to at least the KE-55, a guide could be compiled to suit all vehicles from the KE-30 up to and including the KE-55. Since this is such a common swap, it makes sense that the people with the most experience doing it would have a very good idea of the best way to ach…
-
- 7 replies
- 3.4k views
-
-
I'm looking at doing something unique and putting a V6 into my 87. Would this be possible? And what would I need to do, to get it in there and running?
-
- 3 replies
- 3.4k views
-
-
hey everyone, at the moment I'm looking at doing engine conversion to my ke20, at this point I'm going to be keeping my options open in regards to what engine i will be putting in the car, i have been looking at the 7k townace conversion or the 4age conversion. now I'm just wanting to know is it possable to have a carby feed 4age and the legality of it been carby, and not having all the emissions gear. and with the 7k motor i know about the modification to the sump and that is no drama. though i have heard that the pick up is to be modified. what is involved in the modification of the oil pick up? thanks in advance dean...
-
- 0 replies
- 2.1k views
-
-
my head gasket has a hole in it n i nedda drive it but i got no help to put new 1 in if i keep driving it will it screw up my motor? all it does is leak a lil bit of oil if i top it up now and then will it be ok untill i find sum 1 to fix it?
-
- 7 replies
- 3.5k views
-