Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by Alix55,

    hey guys, just bought a ke55 with a 21R motor in it, don't know mutch about it, all i know it is a 2L and apparently they don't have these motors in australia, other than the 20R and 22R, bought the car for 500 dollars, its got celica struts and brakes. just wanna know if anyone has any info on the 21R motor, GOOD or BAD ? :'(

    • 7 replies
    • 4.9k views
  2. Started by racinnc,

    i wanted to know how many people here have actually done a v8 conversion. was trying to get some ideas on what setup they used. i was thinking a 302 or maybe a 350. havn't decided yet on manual or automatic. i don't know much about these cars. i just bought one for $250. it has a 3k-c and a five speed. my other car is a 01 trans am so i need something that will flat out haul ass.

  3. Started by red mango,

    unfortunately, the 4agze i got from the wreckers had rust build up inside the block. i'm thinking of resleeving or getting another block. any inputs/experience in pro's and cons? also, can i get a block from the other 4age variants? i know i CAN'T get the 3-rib block. but how about the 7-rib 16V N/A block? the the silvertop? blacktop?

    • 4 replies
    • 3.4k views
  4. Started by jfanselow,

    Hey. Ive got a 1994 corolla wagon and I need to put a new engine in it as the 4a-fe is dead. Am looking at either a 4a-ge or 4a-gze. Was wondering how much is involved in this conversion? What sort of performance I can expect from each option when I'm done? And what any major difficulties may be? as I'm on a relatively small budget but can do most of the mechanical work myself. Thanks

    • 5 replies
    • 3k views
  5. Started by AE71Wagon,

    As title says what is the best motor to put in a AE71 without getting stupid and that can be licenced with.

    • 2 replies
    • 1.8k views
  6. Started by psycostud666,

    Hey Guys, I am the owner of three KE 70's, well 2 1/2 cuz one went into a lightpole recently. One is in the garage getting a decent paint job, so in the mean time i am formulating ideas. I have two 4k's and a 5k, two automatic transmissions (3 speed) and a four forward manual. The 5k is good on gas comsumption as well as one of the 4k. i wanna upgrade without having to change my engines. i am thinking of installing a cold air intake and a free flow exhaust, i have also noticed that using QMI treatment give a bit more compression. I installed an alternator of a Nissan RB25 on the 5k to get 80 Amps and installed a new wiring on the electronic ignition system, New plug w…

  7. Started by keith,

    hi guys i need help can't find info in search. i need to rebiuld my 4k engine in a couple of weeks. i was thinking of working a second 4k engine un till a friend surgested putting in a corona engine. has anyone got any surgestions. not to good electrical so wont to stay carbi. other engines will be good.

  8. Started by PJ.G13A,

    Gday, new to forum, hope to find lots of useful info. I have a question. My carby has shat itself on my Suzuki G13A 1.3litre 4cyl engine, and i want to retrofit throttle body injection onto my G13A from a 1.3 corolla engine. I know it sounds weird, but i think it will work as I'm mechanically inclined and determined. Question is, what engine is the 1.3 out of the corolla, does it need any special sensors to work? Ie does it need like a cam/crank angle sensor, or does it use just the standard TPS, MAP, TEMP, O2 sensors? Thanks for your help

  9. Started by PROJECTROLLA,

    Hey everyone my mates got a ke30 rolla that has a v8 in it he needs to change his front struts would anyone know a good conversion? ive seen and heard of corona strut converison but which model.. anyway if you have any ideas or know of any good conversions could you please post them up thanks.

    • 11 replies
    • 10.2k views
  10. Started by hendo,

    just want to know how to fit a 2tg into a ae71. whats needed? and if the 2tg is a hard engine to get your hands on? and what modle cars it came out of? every where i have looked there have been pics but no how to. :)

    • 8 replies
    • 4.1k views
  11. Started by ROLLLA,

    Hi all, I'm just new to this forum and have been playin around with a few ke55's and I'm interested in goin for a VN V6 conversion in mine. I was just wondering if anyone has tackled it here and if so could u guys share with me the pros and cons of the conversion. thanks

    • 67 replies
    • 78k views
  12. Started by 5kpanelvan,

    hey can anybody give me a hand on finding a good engineer in the south eastern suburbs of melb i have a panel van with a 5k plus sc

  13. Started by c budge,

    hey all I putting twin 45mm Webbers on my 3tc but I having trouble it hitting on the brakes master cylinder and I really don't have much room just wanting to know if I can put anything smaller on or a different one . And if anyone has put a hydraulic cultch system in and has any pics thanks

    • 2 replies
    • 1.9k views
  14. Started by walls ke70,

    Hello people. I'm about to try an supercharge my 4k. I was just wondering if anyone can tell me what i would need to get in terms of what kind of carby an size, what kind of ingtion an fuel pump an if i will need to change anything else? I all ready have a SC14 now just need to some advice about what to do next. Can anyone tell me what sort of power people can get out of like a basic supercharged 4k? Cheers

  15. Started by drasticeagle,

    hello i might get told told to look around more but this is what i plan to do silver top 4age into early ke70 brake upgrade LSD my question is this can anyone think of a reason to or not to do a silvertop convertion is there better motor option ? your opinion would be verry helpful before i spend money on it thanks

    • 8 replies
    • 3.8k views
  16. Started by v6rolla,

    hello all i am a new member and i need help!!!! lol i am currently doing a v6 conversion to my corolla and i have made all the engine mounts gearbox etc.. I have got the engine loom all in place with the computer mounted all battery leads done. The part i really need some help with is the wiring for all the relays and to the ignition, i have looked through this site and i see a few people have done this conversion i would really appreciate your help thank you..

  17. Started by red mango,

    i tried searching through the forums already but i need some confirmation on the following before i buy the parts: i already have a 4agze afm (with dli) engine. i already have a t50 from an a series engine. i already have a spigot/pilot bearing 1) i plan to get a 212mm flywheel from 20v silvertop 4age (advantage also of being slightly lighter according to some posts). this should fit my tranny right? 2) can i use a fwd (from 20v silvertop also) clutch system (i.e. pressure plate, clutch disc, release bearing) with my tranny? anything else i missed, please let me know. thanks guys. :y:

    • 4 replies
    • 5.8k views
  18. Started by butcha,

    hi, I'm here open for any ideas on what i should do, i currently have my hands on a 76 corolla coupe with a 3k motor 4speed and borgwarner diff. i need summore wheel spin so ive decided on a full engine change, i know i want to go bigger just not sure what will fit, i like the sound of a 2 litre or ever the 2.6 astron motor but not sure if they are a good fit, 1st thing i will do is change that 4 speed for a 5 speed, but yea I'm wide open for any suggestions so feel free to speak ur mind as I'm goin to make this corolla a serious drifter :wink:

    • 15 replies
    • 6.6k views
  19. Started by 12die4,

    hey there , ive got a set of 15x7 wheels available to me , and ive got a guard roller to pump the guards just wondering if there is any other problems i will run into if i try and fit these on the 20

    • 18 replies
    • 11.3k views
  20. Started by gemless,

    i have done a search but have not found the answers i am looking for. *is there a difference between the small port, blue and red top age4s?if so what are they? *were the small ports released in australia?if they were what would be the difference between a aus one as compaired with a jap inport? *would i find a lsd in a jap import gear box for a 4age? any help would be great thanks brett

    • 13 replies
    • 27.8k views
  21. Started by Brendo,

    hey guys i got a 1980 TE-72 T-18, its a pure pig but with stock engine. don't really wanna spend dollars on the engine, i want ROTOR! anyone had anything to do with a similar/same conversion? input would be great guys.......... cheers Brendan :(

    • 63 replies
    • 73.7k views
  22. Started by toybox,

    hey people I'm looking down the path of a 12a or 13b swap into the ke38 just wondering if any one has tryed this before?

    • 6 replies
    • 4.4k views
  23. Started by hornby88,

    HEY GUYS new member here i been currently finishing a project in the garage at home i thought id share my conversion its got a 3tgte in it, TA22 5 speed box, vk commo rear diff and a disc brake upgrade at the front. I'm currently 80% finished still havin to change over master cyl coz the corolla used to b auto, make a exhaust up apart from dump i got and install a intercooler and BOV and finish minor wiring. ill post pics wen i finish hav many people don't this conversion b4? i kno its a ancient motor but i thought hay something diff

    • 10 replies
    • 5.3k views
  24. Started by Richard,

    HELLO EVERYONE I HAVE POSTED A FEW PICTURES OF MY MATES COROLLA INJECTED V8 WHICH IS NOT FINISHED YET JUST A FEW THINGS TO GO SUCH AS PAINT JOB AND OTHER LITTLE THINGS ALSO IF YOU WOULD LIKE TO SEE A CLIP OF THIS LITTLE MONSTER IN ACTION ON ITS FIRST TEST RUN GO TO AT YOU TUBE ENJOY......

  25. Started by 7shades,

    Ok boffins.... Google hasn't been able to help me this time. I have, amongst many other cars, an 84 tercel with a 3AC. I dig this car... It drives over or through whatever you point it at with surprising enthusiasm. So considering the duties the poor little ninja tercel is forced to endure, I'd really love to shove a diesel in it rather than the 4AGE I have quietly corroding in the shed. I also make my own biodiesel so yeah... cheap transport! Anyone know if JDM 'rollas had a diesel variant in the A series?

  26. Started by Retrospekt,

    Hey people, i have been looking around for awhile trying to find a definitive answer but have managed to so far, i was looking to do a 2tg conversion into my ke55 but cannot find one anywhere for sale, have the opportunity to grab a ra40 celica with 18rg and 5sp for a fairly low price, just wondering if this is a worthwhile idea or stick to trying to find a 2tg? If so any suggestions on where i can get one? (living in qld)

    • 10 replies
    • 8.3k views
  27. Started by ae71drftr,

    has anyone done a 20v conversion in an ae71?,does the 20v bolt straight up 2 the ae71 gearbox?any help with this would be much appreciated.

  28. Started by menday,

    i just bought a 1990 seca and i wanna do a engine swap but i have no idea what to put in it i wanna turbo though everyone i asked has said 20valve silvertop does anyone else have any good ideas and if you can and estimate of price thanks :y:

  29. Started by OniBerserker,

    yeah hey i got my dodgy 4 speed out(of the ke70) and the k50 out(of the ke55) now the k50 is a bit longer than the 4 speed but the 5 speed tailshaft is a bit shorter than the 4 speed tailshaft so it should be right but the original tailshaft on the ke70 was a two piece (kinda like a big nunchucka...it was fun) and the 5 speed one is one piece Now my question is is the one piece tailshaft going to encounter any problems cause of the different suspension? ke 55 has leaf springs ke 70 has coil springs any ideas? Will extractors that fit 4K engines fit 5K engines? stupid question I'm pretty sure that i read it somewhere on the forum but i can…

    • 15 replies
    • 6.7k views
  30. Started by Baz,

    Hi all, I am sourcing parts to turbo my AE92 20 Valve. Have bought a smashed AE92 with engine and gearbox etc complete with EMS computer. I am looking at a 300HP T25, but don't seem to be able to source a decent FWD exhuast manifold (one that will clear the radiator). Any hints as to where I might get one? Also seeking decent forged low comp pistons, rods and steel crank to make the engine bullet proof. I would appreciate any suggestions on where to source these parts. Cheers, Baz

    • 4 replies
    • 5.7k views
  31. Started by PROJECTROLLA,

    Update on my mates v8 rolla that i posted up about a month ago it didnt have paint but its now been painted just has to get new windows,rubbers,front head lights, front bumber,roof lining very soon. Pictures below and for those that can't remember its the little beast that ripped it up on that youtube clip. check it out here at->

    • 8 replies
    • 9.8k views
  32. Started by LINDSAY,

    Hi all , Does anybody know if i can use a AFM loom on a engine that i think is a MAP sensed one ? Basically i bought the engine and the loom from two different sources , the engine i think is a MAP sensed because it has the fitting in the plenum with 3 x vacuum nipples coming out of it but it didn't come with the MAP sensor and the guy i bought the loom off says he beleives its a AFM sensed loom . any help appriciated thanks , Lindsay

    • 8 replies
    • 3.8k views
  33. Started by ScottKE1X,

    Hey all, This is more of a - I'm very close to doing this, do you think its worth a go? type thread. heres the low down: i've got a ke35 with a 4ac halfway in. done the hydraulic clutch and suspension. a mate has a ca18de VERY good condition, low k's, well maintained. he wants $400 for the motor with full loom and ecu. it also has all manifolds including tuned length extractors. it has no gearbox. You should all know 400 clams is a months pay and I'm tightarse :P Nay or Yay? convince me... Cheers Scott.

  34. Started by Beau-Jangles,

    Hey can anyone tell me the difference between a ke70 and an ae71?. Is it just the 1.6 litre engine or is there more. There is an early 80's model corolla i go past every day with a 1.6 litre, zorst (muffler tip), stocky lookin 14" rims, looks to be lowered an 5 spd manual. Wondering if i should offer some money an what these could be worth. This thing looks to have not moved more than 10 metres in the past 2 years an it's a sorry sight to see it sitting there. Is in decent condition but with patches of rust around the place and fading paint. Any help would be awesome. Cheers :P

  35. Started by olskool,

    I am guessing that this is an old conversion by now but that is why I have decided to ask the experts. I was just wondering if anyone could give me a simple straightforward list of what I will need. I have the engine, celica 5 speed, and front struts. What sort of diff would be advisable, fuel pump etc. thanks for any help

    • 7 replies
    • 5.2k views
  36. Started by Trufauru,

    Sorry for my mistakes on the last post... Here it's corrected! Hi everybody, I'm Sebastian from San Jose - Uruguay, and I'm just about to buy my first car, a ke70. I been reading the forums all over but i can't find the answer to my question, the corolla that I'm buying, has the 4K engine resting in the back completly dismanteled. I can find for free a 4A-F engine but no T50 gearbox so I was wondering if the 4A could be mounted easily with the K50 gearbox. I just found this on wikipedia, but i don't know if its correct, here it goes: My thinking is, if the K50 came with the 3A-U and the 4A-U , its very posible to fit also the 4A-F, or there is a big d…

    • 2 replies
    • 3.1k views
  37. Started by 12die4,

    hopefully someone can help me out here , i am fitting a ca18det into my ke 20 and wondering if it is possible to fit s13 brakes to it and if so what parts do i need, thanks!!!

    • 14 replies
    • 5.9k views
  38. Started by Richard,

    hello everyone wondering if you could help me out looking for the most common turbo engine conversion on a ke30 and aslo which turbo engine fits well??? do fj20's fit in good your help would be greatful. thanks Richard

    • 1 reply
    • 2.2k views
  39. Started by seamen,

    was thinking about putting a 2jzgte into a ke35 corolla just looking to see if it would work and how much modification it would need?

  40. Started by beerhead,

    Problem: Me and a mate were having a little trouble with his Bigport 4AGE running a JDM AE86 computer, it just wouldn't rev real well, had huge power troubles, which I thought could be speed sensor related. Solution: Wire a flasher unit into a relay that switches ground and feeds the speed sensor signal on the ecu. ;) It gives about 3-4 pulses a second. Works great! The relay will probably fry after a while, but you'll know when the motor has given up it's rev happy attitude. He's gonna put the flasher on a toggle switch so you can get a little more life out of the setup. One day I might build a digital solution to this problem. I'll let you know how long …

    • 4 replies
    • 3.3k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.