Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
hi every one just got a very cheap 4a motor and 5 speed box yesterday how hard is it to fit one of these into my ke11 has anyone done this conversion or the 4age one into a ke11 what mounts and gearbox cross member would i use will ke38 brakes handle the upgrade and is it much of a performace upgrade from my 4k 5 speed which is pretty standard to cheers james
-
- 8 replies
- 4.8k views
-
-
Hey guys.... Just a question, something thats been on my mind for a while now...... Considering putting twin side drafts on a 4age...... Was wondering if anyone has had any experience in this department.... My main concern is controlling spark....... Will the standard dizzy from the EFI engine system do the job? I know its a N00B question... But I'm lost.... Ta, Josh :)
-
- 15 replies
- 37.7k views
-
-
Has anyone ever done this before? I just got a TE72 that is minus it's engine, and I can easily get a 1zz-fe. (out of a wrecked 2002 corolla).
-
- 11 replies
- 11.2k views
-
-
-
Is this truye that the silver top 4AGE has more HP than the 4agze????? 160HP V's 145HP
-
- 11 replies
- 3.5k views
-
-
Jus thought id do an update of the progress of the rola, I'm halfway through putting a GT28RS on the non turbo motor, this is a temporary arrangemeny while i do a proper build of the S15 motor i have. I have all of the pipework finished,ive just gotta get some of it chromed. I also have a set of SARD 550cc injectors that i still have to make a fuel rail for (cosa theyre top feed).Other than that its nearly there, hopefully it will be goin within a month! whoohooo! :D These are my struts with the commodore 300mm rotors and twim piston calipers.
-
- 33 replies
- 16.7k views
-
-
-
I'm BUILDING A KE70 ROLLA SO FAR ITS GOT T18 LOCKER DIFF ,SIGMA LOWER CONTROL ARMS . WORKED 5K WITH A WEBBER ELECTRIC FUEL PUMP CAMS AND SO ON . BUT IT NEEDS MORE POWER .HEAPS MORE ! I WANT A 4AGE BUT don't KNOW WHAT ONE CAN ANY ONE GIVE ME SOME TIPS ON WHAT WOULD BE MORE APPROPRIATE FOR DRIFTING
-
- 17 replies
- 27.4k views
-
-
Since the 4A-GE fits so snugly in the engine bay of an AE71/KE70, I was wondering if the same crossmember could be used to fit in the Jap-spec Corona/Carina 3T-GTE Twin Cam Turbo engine... Just for something different, I have seen one in a bright green lt2000 Celica. Looked wicked and went like the clappers... Any help is muchly appreciated...
-
- 5 replies
- 4.8k views
-
-
what engine should i go for i my AE 92 corolla i want something that has some power 2 it
-
- 21 replies
- 5.3k views
-
-
I've put a 4K into the KE36. Problem 1 - it will crank over but wont start - Car is getting fuel, spark plug leads are in the right firing order, it is getting spark. Problem 2 - I have a steady stream of oil pissing out from somewhere. I've i can't get it going i'm really tempted to sell it off..... So can someone please shed some light onto why it wont run? Cheers Mick
-
- 8 replies
- 3.3k views
-
-
Hey guys and gals, I just got a ke11 and its got the stocko 3k motor in it. I'm thinkin of upgrading to somethign with a bit more balls I would like to get a 5k with a 5speed if possible/ How much usuually does a package like this go for? How easy is it a fit into the ke11? Does it bolt in? Tailshaft changes?? What amount of power can a 5k put out. I'm not hoping for huge figures but a lil bit would be good. Carbs are old school :) :) Any help much appreciated Thanks in advance Luke
-
- 9 replies
- 3.5k views
-
-
hey, just wondering if anyone else has put a nissan L16 OHC engine is thier rolla. i have recently put one in my ke30. wow big difference compared to the 3k. i chucked that away as far as i could! it bassically bolted straight in, bit of muckin round with engine mounts and cross members but still using the datsun gearbox and tailshaft. I totally rebuilt the engine and got a 2 1/2 exhaust. Goes and handles good and floggs my mates 5k off at the lights, so I'm all good with that. good good
-
- 36 replies
- 11.4k views
-
-
I'm in the process of doing a 20v conversion into my corolla, what brake master cylinder and clutch master is recomended due to th lack of room?
-
- 9 replies
- 6.8k views
-
-
all I'm after is some info on driveline options for a ke30 rotary
-
- 3 replies
- 3k views
-
-
been pulling my 4k from my ke70 apart, as was planning to rebuild with tough cam but I'm really getting the shits with looking at the stupid lil 1.3 and thinkin its not worth it so i been thinkin new engine but i wanna keep it simple so i can do most of the work so i been thinkin 4age twincam 16v or being a cheap ass with a 5k probably the 5k cause i got the k 50 gearbox, which probably wouldnt last to long with a 4age i want to get a t18 diff and swap across a trd 2 way lsd center any ideas or comments people?
-
- 10 replies
- 3.4k views
-
-
Hows it going? I am in the process of modifying a Ke55 Corolla. I have obtained a 2TG engine for her but before I rip out the old 4KC I wanted to know if there are any major differences in the required engine mounts between a 4KC and a 2TG motor. Any advice or help anybody could give me on the subject would be greatly appreciated
-
- 22 replies
- 9.7k views
-
-
My car was finally ready to fire today. (CA18det in KE35 'Rolla Coupe) 1.Cranked it over got oil pressure, 2.Pluged coil packs back in tried to start and there was no signal from the crank Angle Sensor. 3.Tried 300zx sensor turned by hand, still no signal. 4. All wiring is correct. There is continuaty from computer end of each wire all the way to the back of CAS plug. So either both Crank Angle Sensors are rooted or my Computer may be Dicky. Anyone had any simalar experinces or have any ideas what the problem could be??? Thanks Robbo
-
- 7 replies
- 2.3k views
-
-
hey I'm afta information..is a 5 speed clutch the same as a 4 speed cause i just bought a brand new heavy duty clutch and I'm putting my new engine in this week end and i got a 5 speed lined up and i don't wanna put a brand new clutch in if I'm gettin rid of it in the next few months! neone with information asap would be great thanks johnny
-
- 4 replies
- 2.1k views
-
-
I hope this is in the right place to ask I purchased a 3sge G1 beams. It has the ecu ,but does not have the AFM. Will an afm from other toyotas work with engine. If yes what model will suit or even be an upgrade(if afm are upgraded) :P
-
- 51 replies
- 26.3k views
-
-
Hey guys, just wanting some opinions re the possibility of fitting a 21R out of a Corona (st141 -have i got the code right?). Have managed to come across a cheap 21R & box (5spd) if i want it. Now, before the grilling begins, a few points to acknowledge.... 1. yes i did search - couldnt find too much, apart from toyota engine specs on Source of Toyota Engine Specs 2. i have a KE70 with a 4kc 1.3 4 speed at present 3. i know the 21R is an old engine, but its similar vintage to the 4k 4. i want to keep with a carby engine cause can't be f$#ked doing efi conversion, hence 4age etc are out of the question 5. wanna keep the costs pretty cheap (hence 4age are out o…
-
- 13 replies
- 5.9k views
-
-
hey guys,I'm after a 5 stud conversion for my ke 30 front brakes..etc. prefer ford pattern,as I'm using hilux diff already...what rotors,hubs,etc bolt on???????? thanks
-
- 8 replies
- 3.4k views
-
-
hey guys, new rolla owner here, had an aco in my r33 so picked up a ke30 for a run around till the skylines back on the road, but as it happens curoisity is getting the better of me and idea's are forming... Basically yeah just wanted to know if anyone has done it or know's if it's even possible full stop i've saw the 1jzconversion into the wagon on toymods but nothing on the ke30, RTA doesn't bother me only have to go over pits every five years, so it's all about physical aspect budget would be around $10,000 to $15,000 Any info would be great thanks heaps p.s come on 900kg car and 400hp+ (very evil grin)
-
- 4 replies
- 3.8k views
-
-
Hey all, Does anyone know if this has been done, or anyone who has done this conversion. - Sr20de into Ae82. What I need to know is - if the engine will go in without too much fabrication. ( Engine Mounts ) - Will I have to have custom driveshafts made or will there be some I can use. Wiring is not an issue as whole car will be rewired. Any info on this is much appreciated.
-
- 20 replies
- 7.6k views
-
-
hey peoples i recently bought my self an "awesome" ke55 hard top, but me in all my wisdom checked the car with vic roads but not the 3t that is in it :P . turns out that its a little hotter than one should hope for, ie stolen. :D any way as the police don't know wether they'll let me kepp it or not, i might start thinking new engine, but not sure to go with 3t again or something a little more potent. any suggestions that aren't to extravigant would help, thanks
-
- 35 replies
- 9.2k views
-
-
Hey all, Ive been speaking to a few members off Rolla, about my *initial* idea of a FWD 4AGE 100kW engine conversion... anyway I've realised that I will not have the funds for that project - So unfortunately I'm scrapping it! Anyway, Mick gave me the idea of going RWD 4AGE 86kW engine + Twin Webber Carbys (as to eliminate the computer) - Now I think this is a pretty good idea, and would be much cheaper to. Now I'm In Adelaide and my budget is $1500 (Including Labour... Myself and Others \ Workshop) I do not want to go over this budget, otherwise I cannot afford to do this project. I can use the following: -Exisiting T-50 gearbox -Exisiting Clutch -Exisi…
-
- 13 replies
- 13.8k views
-
-
Its been a while since ive been on these forums, but anyway, a quick question for you all, will the 4EFTE head bolt onto the 3ETE bottom end? The reason i ask is that my 3ETE has about 211,000kms on it and i need to change the timming belt. I was thinking of either throwing a low km 4EFTE motor in the EL31 (corolla II, GP Turbo) but does that require much work? Maybe trying to fit a 4AGE or something similar OR just rebuilding the motor with new seals and a ported head. Anyone have any tips for me? I'm fairly low on dollars, so id rather do the less costly. A belt change would be the cheapest, but the seals or rings might start failing in a few thousand …
-
- 0 replies
- 1.7k views
-
-
1st post so if this has been previously discussed, don't shoot me.yet. i'm thinking of a light weight, well balanced car that has growth potential, lots of grip and is still small and chuckable...to me, shoe horning an all alloy 1uzfe into a ke70 makes perfect sense. sure, to get the front/rear weight spot on, it will require some reworking of the firewall and trans tunnel (v160's aren't small) but given adequate thought, time , effort and a bit of money, it can be done...adapting a falcon rear axle with its four link + watts link arrangement makes even MORE sense...more grip means more speed, more angle etc etc... if anyone thinks this isn't a complete wast…
-
- 54 replies
- 25.4k views
-
-
-
Hey have started fitting a fwd 4age in my ke10 have got a T50 box and the slave cyl hits the steering.. is this a problem people have had before? can it be fixed? possibly a different slave or something?? if anyone can help it would be great..
-
- 1 reply
- 1.9k views
-
-
hey guys just bout to take posession of a LT2000 celica( dunno what model it is its the mustang shape lift back) it has a blown motor, but 12months rego , and its fairly straight, so iam thinking of making it a project. so that brings me to my next point, ive herd these types of celicas are perfect for a 1.8L toyota corina import turbo motor i.e apparently u only need to change crossmember and adapt gearbox accordingly. is this true? does any1 else have ne suggestions 4 a diffrent conversion? ive been told a good 20 valve would fit nice, but I'm trying to do something a little different. any help would b appreiciated. thanks. also with the corina motor does any one know w…
-
- 1 reply
- 2.3k views
-
-
Hey what up? I'm back again... I decided from reading that thing about 7k engines that I really want one of those motors! I was planning to drop in a efi engine so I can buy a dry nos kit, which only injects nos at wide open throttle which should be interesting. i'll have to drop the compression of the motor but apart from that, the efi stuff, the gearbox and diff what else will i need to do the swap? brakes and coilovers will be ra60 celica parts oh yeah, what efi parts do I need cause i don't know anything about efi i plan on drifting it, so the nos will only be hooked up on track days any ideas
-
- 72 replies
- 69.3k views
-
-
hey all, I'm Peter I'm live in adelaide and found you guys while searching for information on my conversion I'm getting underway. i have a KE70 which is in damn good condition and i bought for $200 dollars, the head on it was bung, it was leaking water into a cylinder. i just knocked on ladies door and offered her $200 and took it home. Anyway, i plan on performing the same conversion on my ke70 (putting in a s13 SR20DET). is there any other info people have on it, like engine mounts? do they line up at all, a bit of a stupid question, because I'm fairly sure they don't. i havent bought the sr yet in a month or so ill have it. it also sounds like there is a problem with …
-
- 13 replies
- 9.5k views
-
-
hey, was just wondering could someone give me a hand with what is needed for this conversion? I'm in new zealand and a guy is looking to pay us do it but I'm not sure... does the motor bolt in ok and what about the box? also the dash would be a problem wouldnt it, i was thinking putting either a skyline or silvia dash in? what does anyone think.. any help would be awesome!!! :P
-
- 13 replies
- 13.3k views
-
-
Hey guys i just picked up a 3SFE engine complete with computer and loom, and as i have already done the conversion 3SGTE into my sprinter, i have got the whole conversion process down pat, so I thought why not do the converion into the KE70, it might work out to be a good alternative to the 4AGE conversion. The 3SFE makes 115kw standard, as opposed to the 86kw from a 4AGE, and makes a heap more torque than the 4AGE, yet still returns very good economy. The best part about this conversion is that the engines are plentiful and fairly cheap, I would like to get to the point where I can supply a full conversion package, including computer, loom, gearbox, mounts, manifol…
-
- 5 replies
- 13.8k views
-
-
Hey all I'm new here and i own a ke11 with a rotary in it and i have learnt my lesson... don't do it :D So i have bought a 4age to put in my other ke10.. I'm just wondering if anyone has the plans on how to make the engine mounts to fit a 4age in the car... i know its a big ask but it would save me a lot of time and money.. if anyone at all could help me it would be appreciated.. also if you do have plans but it involves cutting firewall I'm not interested.... i made that mistake on the rotary ke11 and wont do it again.. thanks if you can help at all please pm me or email [email protected] because i will more than likely forget i put this post up.. …
-
- 4 replies
- 6.7k views
-
-
hey wats up guys just wondering what would be the best engine to put into my 1982 corolla wagon..its only 1.3 4sp manual at the moment. if i have to upgrade my diff and shit like that how much would it cost
-
- 1 reply
- 2.1k views
-
-
Hey - Another question from me! :) How hard would it be to change motors from the 4-k to a 4Age motor (the 100 kw, 16 valve twin cam) Just wondering :D
-
- 12 replies
- 6.5k views
-
-
hi all! I'm new to this site but looks very informative and well set out. i was wondering if anyone has experience in fitting a 4age20v into a ke20 rolla. i am currently building this car for under 1600cc improved production hilclimbs, so street legality is no barrier. i have seen this conversion done before, and i am very familliar with the 4age varients as i am actually a toyota technician. i have all the engine mounts and gearbox from a AE71 rolla, and have aceess to a engine and gerabox crossmember if needed also. any help would be much appreciated,
-
- 3 replies
- 4k views
-
-
hey all , does anybody know of any engine mount fabricators or engineering place around the hills area , need some for ke25 which is receiving a 4age , any help is much appreciated tahnks , Lindsay
-
- 5 replies
- 3k views
-