Rollaclub Rides

G'day all, this is my rt80 corona, picked it up for $428 off ebay 2 years ago, it had a 2r 1.5ltr auto, i ported the head and wacked some mikuni side drought bike carbs on it, and a 4spd, it went alright but the motor was getting tired, when i was getting it ready for reg and roady she was getting a bit of milk in the oil, so i chucked the spare cars 12r 1.6 in it the night before it went in for a roady, and left it stock, it goes as good as the 1.5, has a bit more torque, anyways here it is! When i got it as it sits now interior when i got it this is how it looks apart from its manual now it was stock motor, i ported the head and made th…

hey guys finally got around to picking up this little gem from a old bloke the next town over for $300. had been sitting since 2008 when the rego ran out, so we rocked up this arvy with a jerry can and a battery......long story short few pumps on the pedal and SHE LIVVVESSSS!!! so down to the important stuff: 18R-C backed by a 4 speed manual, all original granny spec including untouched uncracked original dash with original radio and tape deck, all original chrome hub caps, phat ass grille :) few spots of rust here and there, but nothing unfixable. only have one pic at the moment guys :( will be taking some more tomorrow 4 sho. new pics added!!!

G'day all, my name is glen, I'm 16 and I'm new to rollaclub, i have already done most of what I'm doing to my rolla but ill share the pics ive got of what i have done and as i go, hope you all enjoy I bought my ke70 for $300 with a bigport 4agze, it had been sitting in a paddock at a pumpkin farm for 7years in Healesville vic, which my cousin came across at a garage sale, after a few days of trying to get her running i thought i'd wack a set of rings and bearings and a head gasket in her, and give the motor a respray, anyways ill put more info on as i put pics on, I'm painting it at the moment but its too bloody hot Its cost me around $800 to where i am atm! …

hey guys my names michael, 18 and I'm from adelaide. just wanted to make a build thread for my ke70. i bought the car about a week ago off rollaclub for 600. its very rough but being a dumb ʞ©$ɟ i sold my old baby blue one that was in 20 times better condition but ohh well. i bought my first ke70 with a running 4age for 1000 about a year ago defected for track only, ive since moved on bought a s13 for drifting now and gonna make a 4age daily :\ new car, rust is lighter than carbon fibre ;) 4age ke70 plan is to swap the gear over after matsuri. i bought coilovers a while ago off rollaclub, being a noob i didnt realise how long they were…

Well pretty much bought my car back... long story short i smashed the front end (ran up the ass of some one). The front end had been fixed, extractors, a newer model corolla steering wheel... and a bride seat had been installed. When I bought it back it had been stripped and had no exhaust (only extractors) it had no rego either.. He also said he had just fixed the head gasket but that was not the case cause it was still ʞ©$ɟed so I fixed that, got it skimmed, also it didn't idle so took it to work and fixed that, I stripped the interior and sprayed it black, made it neater. It had a sticker guard to so I left that, adds a little bit of character :) The plan is to ke…

I sold my old KE55 in search for one in a bit better condition. I found this one, out of the blue and strangely enough, same colour - almost same everything! Sitting on a backstreet in Stanhope Gardens in Sydney was this 1981 KE55 SE, I had nearly given up hope finding another one for a sensible price. I called the number on the sign and made an offer which was accepted pretty much on the spot. It belonged to a fragile elderly lady who was in a nursing home, she had not driven the rolla in 3 years and it had just been sitting in her carpeted garage in her villa. She had given instructions to her daughter - who I was speaking with - to please sell the car to someon…

Hey guys, so in November I purchased this 1983 Ke70, purchase title "the Steezy Little Keto" Purchase Date: November 6, 2011. Location: Brisbane. Condition: Stripped, rusty, dented, just bad overall. Price Paid: Ripped off!! $1800 in the condition shown in photos - I suppose I'm the idiot who payed it though. Engine: Stock 4k, 5 speed manual. Goods: Came on a Pair of dragways, and a Pair of BBS meshes, had a Tacho already, non locking handbrake, had a rear visor. Bads: Pretty much the entire car. Nice sticker on the back window? I got the car home excited as shit and straight away took it out into my local streets and had a blast, once retur…

Ke70 Wagon Engine: Stock with a 2 inch exhaust to a sports muffler Driveline: 4 speed. Suspension: front - BC br series ae86 coilovers with JDM vented and slotted rotors, JDM calipers rear - reset leafs with lowering blocks, on the bump stops, stiff as ʞ©$ɟ! Interior: Dish steering wheel Dildo shifter JDM Hang ring A couple of stickers here and there Exterior: Front lip rolled gaurds Wheels: SSR starsharks: 14 x 7 -2 offset, 14 x 7.5 -7 offset Plans: - Bride low max bucket seats - Roll cage - 4AGTE or rotary??? - 2 way diff and what ever else i can do in the process there is also more pictures along the thread …

In 1983, Mr Toyota decided to release this sexy yet sleek powerhouse of joy. He designed her with the most aerodynamics at hand, and to drive like a slug on crack, A little old lady decided that she wanted in on Mr Toyota's madness and bought this little devil from brand new, after arthritis kick in from all the shear head throw-back from its power, she made the choice to sell this machine to a lovely couple to retired her efforts. Five years past and rust got the best of her, but she still stayed young at heart, then, one day a hansom and strapping young chap saw this fetching piece of artwork and saw the potential in her, a couple of days later and an exchange of curren…

this is my rolla 1979 Toyota Corolla Ke 55 stock 4K 2 inch straight through exhaust 13 inch meshies all round lowered 5 speed manual pre stock for now until got the money to drop a V6 Supercharged back into it

Hey doods, After the death of my last KE55 sedan at a khanacross i was in search for another one. In a little country towm outside of canberra i found this: Its a 1979 KE55 sedan and its awesome! Another granny car but an apprentice mechanic was doing a headgasket and snapped a headbolt and they ceased opperations. So after weeks of me going to for a drive again and again i finally got them to sell it :) So the plan is to put my motor in it and make it very nice.. Teaser pics.. No cracks here

Not a Corolla I know but thought some might be interested. Copied and pasted from another site. Bought this yoke near two years ago. Was a standard 1 liter 4 speed. Been working on it since, AE86 brakes, coilovers, extra lock powersteering knuckles, NCRCAs, rear gaz coilovers, underneath fully repainted, all new brake lines, seals, pads/shoes, etc. Fully pollybushed. Basically every type of serviceable part replaced, track rods, TCAs etc. Rebuilt a 1.3 4k about a year ago, fitted a TRD 2 way LSD redid the bottom end then, went again, fitted a 4age on bike carbs. Will just let pictures do the talking.

Well, as the title suggests, I'm new to rollaclub, and i have a ke70 granny spec that i just aquired for free :dance: its an 84 auto, my father inlaw's aunty bought it new, it has 118,xxx k's, a little rust here and there but over all its in great nick for a car from a beachsidetown. she failed her lisence test (shes 89) so does not need the car so just gave it to me. i don't have any pics yet, and the plan it to keep it stock for a while (till i get some cash) then play with it. i live in coffs harbour, I'm 31, and a 2nd yr diesel mechanic apprentice. wanna know anything else, just ask :cool: kev

A mate just bought these 2. White bonnet is single cam the other is a twinky. Started working on them today. If we get enough done in time he will be bringing the twin cam to Winton on Oz day.

hey guys, pretty new here, thought i might start a thread for my 4age build. picked up this little girl from the wreckers with a genuine 106xxx on the clock, saved her from the crusher :) pics are pretty shit camera settings were all gay from christmas shooting, but i will upload some more shortly full factory trim so far, only mods being suede dished steering wheel locked diff and suspension my makita :D cleaned up the rims and some body work, but it was fairly clean nearly ready for 4age conversion got most big bits: 4age t50 loom and ecu tailshaft organised only need crossmember and then the 4k can come out cheers james

Heres mine te72. I'm from the states hope u guys like it. Motor built 87mm 3tc, t61 20psi haltech e6x, sneider cam, port polish head dual valve springs etc drivetain w58 trans, custom 1 piece driveshaft, ford 8.8 auburn posi 31 spline mark williams axles suspension ae86 front struts with willwood front brakes, qa1 coilovers, tenabe front swaybar, t3 camber plates, custom tension rods aerospace rear brakes 4 piston calipers Interior integra gsr front leather seats, datsun console, custom white face dash, auto meter phantom series gauges exterior mostly stock just 16inch mesh wheels

hey guys i know i havent been on here for a while, and was quite annoying at times but now i have a build that is actually going somewhere i have a RT142 Corona with a sr20det in it its only a track hack/missile but still have a decent car to be proud of ENGINE s13 sr20det redtop stock as a rock running 10 pound and a front mount and nistune ecu SUSPENSION AND WHEELS front s13 coilovers rear 6kg springs with short stroke shocks r31 front lower control arms t series toyota diff with 4.11 gears and lsd(LOCKED STANDARD DIFF) aha 15 x 8 - 9 steelies on front and whatever on the back for skids :) INTERIOR bride fixed back seat on custom…

Picked this bad boy up about 1 month ago as a bit of a side project along side getting my calais turbo wagon back on the road......its a 1983 KE70 Wagon, 4k, 4spd manual, 190,xxx kms on the clock. Doesn't blow smoke, lights work (sort of) and it drives pretty straight considering its age. This is basically going to be my car to learn rust repair, body prep and painting on. It's unrego'd so It doesnt really bother me long it takes to sort out. It has a decent amount of rust, but most of it I THINK i will be able to sort out.

I'm lookin at buyin a couple of ke20s but don't really no what there worth i own two rollas a 76 ke30 and a 78 ke55 that i brought very cheap the ke20s are basically shells minamal dash parts no lights motors gearboxes diff etc etc a little bit of rust and i jst want two no what a good price is for them thnkz in advance for ur help

My 4agte Ke70 recently blew up its 2nd standard diff. So i decided to do a conversion I Recently completed my diff conversion in my ke70. R31 skyline lsd disc brake diff. After much research i found that everyone was either taking both diffs to an engineering shop to get the mounts changed over, or making up a jig. Both options are quite expensive/time consuming. Being low on cash i did the conversion a cheaper way and wanted to tell others- (this is the reason for this post). I first marked a centre line on both diffs (went between the upper trailing arms on the ke, and between the sway bar mounts on the r31 to work it out). Then marked a reference line along …

Hey guys finally getting abit more motivated to work on the car and i thought what the hell ill start a thread My project is a 74 ke30 2dr 4k,4 speed minor rust in couple of places but good for age My plan is to try and build tough little 2dr and attempt to do most of it myself, rough list: head work (match porting,shaved head and 3 angle valve job) new cam (got a tighe 154 ill try its similar to camshaft engineering CE701) lightened flywheel gilmor belt drive( maybe) balancing as much as i can afford elec. dizzy(got an internal igniter elec. dizzy) single 40 dcom/dcoe weber(bought and…

hey all! my names dan and I'm 17, living on the Gold Coast. I got this ke70 from brisbane about 2 weeks ago.. and plan to do a bit to it.. so i thought i would do a build thread first off, its a 1983 model ke70 with a 5k & 5 speed conversion Gt shocks weber carby extractors 2 1/4" exhaust first off, driving it home from brisbane the throttle return spring snapped, so i put a zip tie to hold it in place till i got home also, on the drive home.. no matter how loud i turned the radio, i just couldnt hear it so i went out and got some new 6x9 speakers also

Name: Leighroy Car: KE38 Windowless aka Vanessa Motor: 4K Intake Stock carb with sports filter Exhaust: standard Driveline: 5-spd Suspension: FRONT: KE70 Front struts with lowered springs REAR: standard rear leaves Brakes: FRONT: ke70 REAR: Stock drum Wheels & Tyres: 13" corolla stockies with chrome dress rings Interior: new carpet, retrimmed refoamed seats, painted plastics, 5" tacho retrimmed coor card with vs calais speaker/map pods Body: had the rust and dents fixed Stereo: not done yet Other:XF falcon wagon roof racks, mesh sun visor I brought this absolute ripper from an old crazy bloke who runs a wrecke…

Today i baught a new corolla. in an attempt to relive my teenage years i became the proud owner of a white 1985 twincam corolla. 185000k's. Bargain price $1500. all service history, books and recipts since new.. stoked.! guy i baught it off just got a fancy bmw. just wanted it gone.

hey guys been on here awhile now and now i thought it would be a good time to show you guys my ae82. 1987 AE82 SECA 4AC - 278xxx and going strong 5 SPEED MANUAL 2'' CATBACK EXHAUST LOWERED ON KING LOWS PAINTED STOCKIES i have a build thread over on ae82oc.com, so please bear with me while I copy the jist of that over here. cheers azza

Hey guys, Just thought i'd start a thread of my recently purchased $500 ke70 that i'm planning to work on over time. Specs are- 1983 Flat Front Ke70 Standard 4k motor 4spd Golf Ball JDM gear knob :P Fairly straight body with a fair bit of rust. Its pretty stock standard but didnt expect much for 500 bucks. My intentions are to make it look a little more JDM and turn it into a street/track car. I will post more photo's and such when i finish gettin rid of rust and add more mods but let me kno what you guys think along the way :)

Hey all, We got a overrated 55 that me and my brother went halfs in 2-3 years ago from a one owner old granny. anyways cut a long story short me and my brother were doing a burnout and then donuts and smashed into dads trailer lool. only damange is bumper, grill and right gaurd. I'm currently 16 get my lisence in 5 weeks and I'm on 11 weeks holiday. plans for the car are to paint it killrust red, hoping for a 5k motor, which i still need to find hah and putting a 3k bigport head on that i have spare for my race car with somthing equal to a 212 waggot cam for 3k. budget is around 1500 give or take 500 and i know it doesnt seem much but we have 80 percent of the parts allr…

Hi all! this is mine and my mates new ride.. needs a lot of work, and I can't exaggerate enough about the a lot part.. When we went to inspect the car we were originally looking at the KE70 wagon but it wasn't worth our time.. he had about 5 in total and in the dark this looked like the cleanest one, yet we were deceived, Instead of driving back home and thinking about it we gave him 300 for it and drove it home. Although, I know people will hate the fact I have spray painted the car 4 of my other mates did it because the all knew I was planning on shaving it all back and repairing the rust. At this stage the plan is to clean up the inside of the car (remove…

Hey all, just got my first car today, after about 9 months of searching for a good enough ke70 i found one. I'm 16, and this is my project car with dad. Stock and pretty much rust free, its a good start. :dance: Engine bay. Stock 4k-c Perfect interior. I will post more pics tomorrow due, to its getting late, and i have to clean up ect. :yes: Stay tuned!

my car is a ongoing project ae71 1984 5speed has a 4age i got the car like this pink paint 18 crome wheels tvs in head rest seats re trimed i need to get car wired up but so far I'm happy and i hope yous like my car cheers allso can anyone tell my whot 4age i have

I have been here a while and thought It was time I showed a few pictures of my car and what type of driving it sees. the car is a dark blue KE70 flat front and has been owned by nearly everyone. I live just off Magill road and grip drive through the hills on a weekly basis. the original 4KC was quite a screamer and never missed a beat, however a 4K has little to no torque and to climb hills with speed there is no substitute. turbo or supercharged engines have too many potential issues that will lead to increased repair/running costs, increased problem diagnosis, installation difficulty. the "feel" and "free" rev of a naturally aspirated engine i…

hey, name is brian from ireland, a second home to the ae86, ke70s are very rare over here, only a handfull left on our roads, and used as summer cars or weekend cars, member over a year but never posted up pictures of my cars...... so here goes, this is my slant front ke70 estate, originly 4k but fitted a 4age high torque out of an ae92 gti corolla, started it over a year ago, tipping at it when i get free, but between being messed around, work and collage, its still not finished....... hope to get back into it after christmass and get it sprayed up..... here it is this is her in during the heart transplant and this is my orther pride a…

Hi, My name is Dave and this is basically my first post on Rollaclub, This is my new KE30 :cool: , I've been after this exact one for a while actually, when I found Towe was selling it I really wanted to buy it but before I could come up with funds NerfBat had already taken ownership, NerfBat had to move it on so I am now able to finally call this awesome little car my own. For the money I paid its one hell of a car, kudos to Nerfbat,Towes and who ever else has owned this car at one point or another beause its a neat little thing. 5K motor Mod Plate for 5K Extractors 2 inch exhaust system ke70 5 speed box 4K lightened flywheel Mix of Clutch Industries…

Hey everyone, Its probably about time i put up a ride post so here it is. General Info - 1991 AE93 Toyota Corolla SX Seca Mechanical - 172,XXX kms on body, unsure on motor km - Wolf 3d v3 w/ hand controller - MAP sensored 4A-GZE 7rib. w/ SC12 - Bosch coils with thick leads - E81 manual - Exedy HD clutch - King Lows with New shocks - AE101 SS Big brake front end with bendix HD pads - Extractors with full mandril bent 2.5" exhaust Wheels - 15x7 Rota RB ET+30 with 195/55 rear and 195/55 front. Body - Standard w/ bonnet scoop - Glass headlights with narva 5000k white globes Interior - JVC KD602 Headunit - 500gb HDD for all music and no …

So after me selling my pride and joy ke70 this is what I ended up with Toyota Aw11 Mr2, Mid-engined, Rear Wheel Drive.. 90000k's on the clock Pretty average body work with some rust, Its been sitting in the weather most of its life..but shes from 1984 so could be worse. Picked her up for $3750.. Which I thought it was reasonable. Going from a 4k to a 4age is Wow ...I don't have to keep my foot flat on the floor to keep up with traffic! When driving it home it just felt like it wanted to get up a go. Love the centre console, only has 1 stalk behind the steering wheel for turning very clever... First thing is just to give her some loving. - Give engine a clean …

bad things happen when i get bored, i have a yn85r hilux as my run around to pick up parts and so on and have been driving it a fair bit lately so ive had boost withdrawals from not driving the cressida. so i bought a wrx standard turbo off a mate for $100 and I'm going to do a blow through weber carby set up. i spent today doing half of the job so all i really have to do is make a J pipe for the turbo, exhaust and boost pipe. ive done as much as i can so its still drivable and will try do the rest next weekend. first thing i did was pull the sump off and weld a fitting in for the oil drain then i pulled dissy apart and drilled two holes and put screws in to st…

Hi guys, Just had to share some pics of my wife's Corolla build, I had some "parts" laying around and thought they might fit on the ol 4AC :)

Hi folks Decided it was high time I posted a thread of the little Tiara that has been living with me since earlier this year. Story goes that my brother is a bit of a car nut like me, and when I sent him a link for this on ebay, he fell in love and went hammer and tong to win it. Win it he did, and then asked me to go collect it for him since he lives in Sydney and it lived in Melbourne, just like me. It had a few months rego left on it which was handy, so I grabbed it, assured that nothing was wrong with it for a roady, and off I toddled. Here are some pics from the ad. G Complete with relatively gutless 'R' engine (note no numbers…

Hey fellas, picked up the ke70 3 weeks ago for $1000 good deal i found, standard 4k 5 speed. rust in the usual places- boot trim, around fuel cap ect. was going to pay someone to do it for me but i managed to do the research and learn to do it myself, The only experience with cars i have had is working in sales at ARB 4x4. First picture was the day after i got it. i took out fixing the rust and priming it