Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Car Electrical

Car electrical gremlins/questions? Ask for help here..

  1. Started by braaap,

    Ok so. ive checked all the fuses including the ones in the kick panel and ive replaced the switch at the pedal. My tail lights are staying on like I'm constantly braking. ive searched that many forums and no one is having this problem. or if they are its the switch or the fuses. so HOPEFULLY someone can help.

    • 8 replies
    • 4.3k views
  2. Started by [email protected],

    Hi, My daughter has a 1992 Corolla Sedan AE92. I've just installed a new Audio head unit for her birthday but it has no power. The original Fujitsu cassette player had power. A mate suggested that it could be a blown fuse. He asked if the interior (dome) light works because it might share the same fuse. The interior light hasn't worked for a good while. So I thought ... how hard can it be to find a blown fuse? The fuse cover diagram in the kick panel doesn't match the actual fuses installed. There are heaps more fuses in the actual fuse block than shown on the diagram. Does someone out there have a correct and full diagram/list of what fuses are what in this little…

  3. Started by Spencer,

    So I had a little clarion head unit but going for a newer Kenwood, and the wiring is confusing me. I got the Kenwood as is with its harness and the clarion was just cut out just before its harness plugs into its unit. Kenwood - Kdc mp5043u http://manual.kenwood.com/files/4a56e3f34ca7c.pdf Clarion - DB356MP Cheers Spencer

    • 8 replies
    • 22.4k views
  4. Started by dirtbagke70,

    my dip dosent work on my ke70 why? where does the plug on the gearbox(reverse lights) plug into? and when i turn my lights on my back lights don't light up but my break lights work when i aply breaks and i think they are called park lights?the 1s on the side of my frount lights and below my back lights don't work?

    • 5 replies
    • 6.4k views
  5. Started by machg,

    AE82 Twinky. Did a gearbox swap. Speedo made a bit of a racket on first drive. Now ODO works, but speedo sits permanently between 180 km/h and off the clock. Any ideas?

    • 7 replies
    • 4k views
  6. Started by babyblueke11,

    hi all I'm after all the information i can get on installing a megasquirt for a 4age in my ke11 i have done heaps of research but am still lost on what to do do i use the vast ignition and try and source a maf igniter or use ford edis module. any help lp on wiring up and what system to use will be much appreciated

    • 0 replies
    • 7.1k views
  7. Started by dirtbagke70,

    i have a ke70 wagon with 4k i brought it off a mate and it is striped all redy to paint ive painted engien bay and put moter in ive got it turning over but can't get spark to dizzy i have gone and got brand new points and condenser i don't realy know how to wire up the coil ??

    • 10 replies
    • 10.2k views
  8. Started by SteveXc,

    Hey guys, need a bit of help.. I was trying to get my number plate light working and have shorted something. Had all my lights working but now i have no head lights, dash lights, rear parkers, or reverse lights.. however the high beams, and brake lights are still working. I checked all the fuses and they are fine, how ever no power is getting to the dash light fuse inside the car. All the fuses under the bonnet are fine, all wiring seems fine, so I'm stumped! Any help would be fantastic! :)

    • 10 replies
    • 7.5k views
  9. Started by dori~Ke70,

    hello everyone I was wondering if anyone can help me? my wipers don't work and i believe it is because the motor is rat shit. i was wondering if anyone knows if there are any motors form other model corollas that will work? also a completely off topic question does anyone know if 15x7 21offset rims will fit a ke55?

    • 2 replies
    • 3.2k views
  10. Started by 4-ac=PowerHouse,

    i've got a ke70 with a big port 4age, we can get it to crank but not fire, just wanna know exactly what wires in the ecu need to be connected, we've got the engine loom all hooked up, but the 14 pin plug is missing looked on google, but that didn't help i know heaps of people on here have done it, just wanna know exactly what you did cheers

    • 2 replies
    • 3.3k views
  11. Started by Kid-Ae,

    My problem: - Charge light stays on, kills battery. Solution? Changer alternator! Dilemma - Nippon-Denso unit has a plug on the side (guessing this is neg, earth, fuel). Bosch unit found at wreckers is an internally regulated alternator with a completely different setup. Is there a way to install the Bosch one? Just want to get this sorted before I tackle the rest of the electrical system (kind of helps to have a battery that will hold charge). Thanks.

    • 5 replies
    • 7.2k views
  12. Started by ae95- wagon kid,

    Hey everybody does anybody have any experience with fibreglassing. specificatly with custom speaker boxes. what i bascically want to do is use fibreglass matting to make subwoofer pods that protrude on an angle. (slightly inwards) similar the the picture's below. but it will also contain two 6x5's, 6x9's or similar and will have an amp, i have repaired bodykits etc with fibreglass but have never made a custom box. is there a particular type of fibreglass, or just use the type you can pick up at the boat builders. what methods do you use preperation application sanding etc its it structuraly strong enough to handle the power of…

    • 1 reply
    • 2.5k views
  13. Started by Twinky,

    Hi guys, I'll get started with this question, How do I set up the trigger system on a 5k? AAAANNNND...... How can I do this without blowing the bank? Thirdly before anyone says talk to Haltech support I already have and they have been less than helpfull by throwing me generic responses and shoving god damn reluctor adaptor pinouts in my face which I didn't ask for in the first place. The long story. I am on the path of going EFI on my 5k and have come to a roadblock. I thought I had everything sorted and knew everything I needed to know. Until I got to the last part, the Trigger!!! For those of you who do not know what I am talking about you might as we…

    • 16 replies
    • 39.1k views
  14. Started by Dowsett,

    Hey guys i am trying to hook up a SAAS aftermarket tacho to my 4age. we hooked it up but it didnt work, so i tried my dads tacho and it works on the positive side, but on the negative it jumped around. mine jumped when it was on the negative side but now doesnt do anything at all? any ideas? Michael

    • 3 replies
    • 4.8k views
  15. Started by Tally,

    Hey guys 2-3 weeks ago, my right headlight blew. I found it strange as they were working fine for ages. Now my indicators don't work properly, they work most of the time but sometimes they get stuck illuminated and don't flash. Anyway, so today I decided to replace the front headlight, took out the old one and installed the new one. it worked so I was happy but It was unusually bright and when I first turned it on inside the headlight filled with this white smoke. It worked for 3 minutes and blew-out Not sure whats going on here, but looks like its getting way too much power to the right headlight and something is faulty.... Any ideas? I'm thin…

    • 8 replies
    • 4.2k views
  16. Started by JordyKE,

    Gday guys, I've called it a day. Nearlly giving up on the whole car ha. I have a KE26, I'm putting an engine in atm, with a single sidedraught. Let the picture do the talking.

    • 26 replies
    • 32.7k views
  17. Started by Millaz88,

    Hey guys just got a ke70 stock 4kc so I put a after market tacho in but the revs seem to wonder a bit and seem to jump up under acceleration but not with the engine if that makes sence? Like have it in top gear put foot down and revs jump about 400-500 rpm when the car hasn't gained any speed oh also it's manual Thanks miller

    • 7 replies
    • 2.9k views
  18. Started by jamen23,

    Hi Guys, Does anyone know where I could get a set of crystal smoked headlights for a AE92 corolla hatch? Or do you know someone who has a set forsale? I have tried eBay, but no one selling them... :hmm: Look forward to a reply.... :blush:

    • 1 reply
    • 2.9k views
  19. Started by ae824ate,

    Gday guys, my 35W 6000K HID kit will be in my '55 in a few days. Wanted 4300 or 5000k. Just curious, and yes i did search, how many people have done a HID setup before on their rolla, and how satisfied were you? Yeah yeah, i know its illegal to do it on a car that wasn't manufactured with it, but i drive mostly early morning and late night in the country. 2 of my mates have done HID setups, and never been hassled by the cops. Let us know. Thanks, Luke.

    • 31 replies
    • 46.4k views
  20. Started by Kid-Ae,

    Not good with electrical items, but ill describe it anyway.. Instrument cluster and headlights have a slight flicker at all times when on at same time as car.. When turned on separately, that is when the car is off, they work a treat. Not sure what's happening, but even the interior light does it too. Head Unit and amp are both fine, and all fuses look sweet... Guessing it's an earthing problem? If so, where do I find the earth for all this?? Thanks, Sam :)

    • 0 replies
    • 1.7k views
  21. guide to installing a cd player and speakers in a ke30, had abit of a laugh at the dodgyness, but it works haha http://www.youtube.com/watch?v=mS7Yeb25pyE

    • 6 replies
    • 4.5k views
  22. anyone know where this wire belongs?? it comes off the thing on the side of the coil. maybe this is why it wont start??? any help appreciated zane

    • 7 replies
    • 3.1k views
  23. Hi all, A couple of days ago the the indicators started playing up. Turning them whilst waiting at a set off light for any more than 10 secs they would just stop working. This happened for a little while then they just stopped working altogether. I turned the hazards on to see if they worked but they don't either. I checked all the fuses and they are all fine. I then replaced the indicator relay as I thought that was the problem but, they are still not working. Wondering if anybody has come across this problem before or has some ideas what the problem might be. Cheers,

    • 1 reply
    • 4.4k views
  24. Started by Spencer,

    Hey Everyone Since installing my quads and replacing some fuses after soldering the wrong headlight cables together :laff: my car wont start,without jumping off another car. I've had a very similar issue when I first bought it , I worked out it was volt drop from the corroded leads coming off the battery so that was all replaced and Replaced with a isolator, good cables and also got Brand new Century Battery. After that the car ran like a dream and started first time ,every-time. Now the dash is lite up pretty normally but when I turn the Key the dash is hardly visible and it turns over a little, then struggles, then stops turning over and makes a whining noise from …

    • 15 replies
    • 10.6k views
  25. Started by cozza_mane,

    Ok so I'm putting a turbo onto my 4age soon enough but the drama for me is what ecu i can use, just wondering what people have run in theres? -haltech -motec -microtec -autronic..

  26. Started by Onikage,

    Those of you who are familiar with the AE92/3 and similar rolla's might know that the upper spec models come with central locking, which can be activated with a switch located to the right of the steering wheel (on RHD models at least) I recently purchased a AE93 SX, the central locking switch is there, however there is no actuator thing behind the switch. Can anyone give me some ideas about looking into how far my central locking system has been comprimsed, and what i'd need to do to get it all working again. PS: Sometimes using the snipper on the drivers door will lock/unlock that door and both rear doors, sometimes it only locks/unlocks the drivers door. The fr…

    • 4 replies
    • 39.1k views
  27. Started by Madsnakes,

    I took my stock ke70 in to get a roadworthy the other day. He picked on a few minor things. But one of the things was focus and adjusting the headlights. Now, i'm new to cars and stuff. But i've never heard of focusing headlights. And when I put them on, they are fine!! I'm just curious of if this guy was shitting on, or if there is an actual way to adjust and focus the lights. Any help would be helpful. Cheers.

    • 2 replies
    • 2.6k views
  28. Started by RA28GT,

    Hey guys Ive got a problem in my KE26. Its been like it since i purchased the car. I have no low beam. When the indicator stalk is in low beam the high beam is stuck on, and when i flick it to high beam the blue light indicator flicks on and turns right off while the high beam lights remain. All fuses are good and I've replaced the original headlights with H4's. Any ideas?

    • 5 replies
    • 3.6k views
  29. Started by saunders1990,

    hi i was just after ecu pinout diagrams for the 4age 16valve and 4age 20valve if someone could help me out with a link or something that would be awsome

    • 9 replies
    • 54.9k views
  30. hay have been researching on the 4age 20 valve silvertop into ae93 conversion thati am planning on undertaking within the next mounth or so and i have found just about all i need to know about the conversion but when it comesto talking about the wiring people just say something along the lines of "the wiring is the trickiest part but its not that hard" wich doesnt really help so i was just woundering if anyone had any detailed info on the wiring part of the conversion

    • 6 replies
    • 5.8k views
  31. Started by dwnz,

    So went to go out for a cruise in my KE30 tonight. Car started fine, and ran for a minute or two. Flicked on the head lights, and about 10 seconds later the whole car cut out. Completely. No lights on the dash, no charge light, nothing at all. So poped the bonnet, checked all the battery wiring etc, all sweet. Then I noticed the battery was rather warm. So let it cool down. Tried jump starting off a mates car, jump leads got VERY VERY hot (too hot to touch) and it sparked hugely when we chucked them on. Plus car still did nothing. Took battery out, let it cool, charged it off wall charger for a bit, put it back in car, still nothing, and it got very warm again. …

      • Upvote
    • 8 replies
    • 7.5k views
  32. Started by me!!!,

    hey guys, I have noticed another problem with my ke70, hopefully this makes sense to all you's, here goes.. basically you'd probably know that to turn headlights on is to twist the knob, to turn highbeams on push the stick away (and it doesnt spring back) and to flash highbeams you pull the lever (and it springs back) in my car, all headlights work, and i can use the flashing function of the highbeams (works fine) but putting the high beams (pushing lever) on turns off the headlights. so If i wanted to use high beams id have to pull the stick and hold it there.. does that make sense?? I also had this problem in my 86 celica, sold it before i fixed it …

    • 1 reply
    • 5.8k views
  33. Started by rollas-r-us,

    Last Friday night, I went for a drive into the city, the car is fine on the way out the interior dash lights work as does the radio,sub,amp etc. Although on the return trip the dash lights went out the radio stopped playing and just turned off... The weird thing is that the head and tail lights still operated. Anyone know whats up? I was initially thinking it would have to do with either the alternator or the battery. Cheers Tom

    • 3 replies
    • 3.6k views
  34. Started by ke30 driver,

    hey all, got an issue with my fuel and temp gauge dropping out when i have my high beams on and heaters on full. anyone had an issue like this? i havent had time to look at anything so i need some pointers cheers

    • 11 replies
    • 7.2k views
  35. Started by Tim 4AGE+T,

    Hey there, Looking to know if anyone has information regarding anyone here in South Australia that's equiped with software to tune an E&E Freedom ECU. Pretty sure Jay has a cable, but not the software. I'm hoping someone else may have one of these ecu's already and know who can work on them. Please help LOL Tim.

    • 0 replies
    • 12.7k views
  36. Started by me!!!,

    hey! neither of my reverse lights on my ke70 are working! checked globes and their fine, brake lights and indicators still work. is there a fuse for them, where is it?? thanks people~!

    • 4 replies
    • 13.2k views
  37. Started by LIL BLU MAN,

    hey, so i been workin on my ke26 and i done a brake upgrade and put a set of crystal lenses in with good bulbs, everything was working fine untill today i went to do a final check over of the car and the parkers wernt working, so sure enough the fuse was blown so replaced and blew straight away, check all 4 parker bulbs all good, everything seems good, sometimes the dash lights will work sumtimes not, so has someone got a wiring diagram so i can chace wires or anyone had this problem an kno what it is

    • 0 replies
    • 2.2k views
  38. Started by FOOMAN,

    Quick question, I was wondering if I put the battery from my s1 Rx7 into my ke30 (don't know what each battery are but can look) will I blow any fuses or anything break etc. or should i be fine?

    • 6 replies
    • 3.2k views
  39. Started by altezzaclub,

    I have moved along and fitted an electronic dizzy, one that KE Motorsport sells. Certainly cleaner at low revs or when cold, and I just added advance until it felt OK. Today I plotted an ignition curve, and I found I was running 18deg static advance to make it get up and go! So I've reduced it back to 8deg and plotted this- One set of figures with the vac unit on, one with the vac unit disconnected, and a Piper dizzy chart for comparison. That is what the Honda Accord uses, and is similar to the other dizzys mapped here- http://www.jcna.com/library/tech/tech0015.html I think the car feels much better with more advance early on, and I wondered who has had the…

    • 22 replies
    • 40.7k views
  40. i'm having trouble finding a reversing switch for my manual ke55 does any one know where i can get one from with out buying the hole gearbox?

    • 2 replies
    • 2.5k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.