Car Electrical
Car electrical gremlins/questions? Ask for help here..
959 topics in this forum
-
-
Hey, my alternator is stuffed just wondering what alternators I can exchange in its place. Its off a 4agze engine and here is a pic of the plugs.
-
- 1 reply
- 4.4k views
-
-
I have a ae92 corolla GTI and the park lights wont come on, all other lights are working fine head lights, brake lights, indicators though I can't drive at night as my front and rear parkers wont come on. I'm thinking that it is a earthing problem. I'm on the northside of brisbane give me a call if you got a spare afternoon to sort this out. 0423566264
-
- 3 replies
- 2.5k views
-
-
So my KE30 is a 1975. has the external regulator for the alternator and what not. since i've had the car the low beams have not worked. the lamps and globes have been replaced. there is box on the passenger side that the headlight wires appear to run into so i would think that its the relay. 6pins! but on the box it says tail relay? my question is... has anyone else had this issue and how did you go about fixing it? ie. replace the relay with another one? buy a new one? (if yes then where and how much) or for someone cluey with electrics did you split the relay up? and have a couple of seperate ones to control tail lamps and headlights? cheers, Lu…
-
- 36 replies
- 58.8k views
-
-
when the inicator stalk comes up after turning left the dash lights and rear light turn off and i have to wiggle the stalk around for them to come back on
-
- 3 replies
- 2.3k views
-
-
hi fellas how ya going. i won off e-bay a 4age sx twin cam dash cluster. i would like to fit this in my ae-92 rolla sedan that has a 4a-fe twin cam injection but soon to replace it with a blk top 20 v hopefully any way,will this dash cluster fit into my car ok ?? will all my plugs just pop rite in ok ?? i suppose i will need a 4age oil preasure sender then ?? will it be a hard job to achive ?? what other things will i need to do to get this mod up and running please ?? and where would you relocate stero too then as there will be no spot for cd any more for it ?? sorry guys for all the questions. any info would be great thank you che…
-
- 13 replies
- 4.7k views
-
-
hello! i need some help wiring up an ae92 taco cluster to my ae95 non taco cluster. i've also got the cluster up for sale in the parts for sale section if i can't get the wiring right anyone got a pin payout for the ae92 taco cluster or the non taco cluster (I'm hoping they are the same as the one in my ae95)
-
- 9 replies
- 29.1k views
-
-
Hi, Been toying with the idea of running a Accel Super coil 140001 in my KE15 for a while. So last weekend I got off my bum and put the one I had in the shed in. Coil is designed for a points system with super low internal resistance so there is minimal "inductance resistance" in the coil Thus making a bigger charge BOOM more spark power. These coild can make up to 65,000V on a test stand simulating a V8 so should go good on a 4 banger right.... Well bolted it on hooked up my wires (noting it is a KE1X so no external resistor). And start car..... Struggles to idle can't rev past 1500 RPM pops splutter runs horrible well not at all really. So on went st…
-
- 3 replies
- 6.2k views
-
-
Hey guys I think ive wired it up right but its not cranking over? ok information, I have the neutral going to the front left strut tower on of the three bolts as my battery neutral, and i have 2 wires running to the starter motor the big thick one. The trigger wire which i believe to be a positive trigger switch i put on the positive to the battery which i believe should make it crank? Is there anything else i am missing like a ground for the Starter i figured it should be sweet because its bolted to the bell housing or is the trigger neutral but it show's in the picture in the knowlege base in this section the trigger to be positive http://www.rollaclub.com/faq/…
-
- 9 replies
- 3.5k views
-
-
stupid instruction manual doesnt show shit! anyways, everything is done except thers 2 ouputs on the oil pressure sender. one is W and the other is G witch wire do i attach to the gauge? my guess is G is ground? and other is ouput? cheeersss
-
- 7 replies
- 4.1k views
-
-
tryed to start the rolla to move it for paint , now i have no spark at the plugs , i do have power to the coil and its earthed,
-
- 22 replies
- 28.7k views
-
-
ok i have to problems dash and head unit.. Dash: my gauges for the dash don't work i keep blowing fuses its really starting to piss me off i start the car and they don't work, i replace the blown fuse and try again it works and then when i turn it off and turn it on ive blown another fuse sometimes it works and sometimes it dosent blow a fuse whats the problem? and i replaced my dash a few months ago and it was fine but now its being a C*nt to me plz help Head unit: my mate recently installed a head unit into my car but when he pulled the old one out ( ive got the manual too) he looked at the manual and the wires and there all different colours to what it says in …
-
- 3 replies
- 3.1k views
-
-
i need some help identifying These wire's I'm trying to get my blinkers, all lights and Starter motor wired and I'm not getting power to anything dammit iv'e checked the battery and its fine Here are some pictures i don't really know what they are The white one is defiantly live neither of these seem to be live do these belong on the coil? i don't have a clue what any of these are lol
-
- 9 replies
- 2.1k views
-
-
Got a 1997 Corolla and the courtesy light stopped working. Popped off the cover and this was the first time ive seen this kind of bulb. The bulb seems to be riveted on a aluminum rod and onto the plastic housing. I wouldn't have a clue how to remove it. Didnt want to have a crack at getting it off at the fear of buggering up the aluminum rod because obviously its needed to change between door, off and on. Anyones help is appreciated. Cheers
-
- 7 replies
- 4.8k views
-
-
Hey guys.. this might sound abit dumb to some but how does a microtech package come.. I'm lookin at buyin a LT10 package'brand new'.. for my 4agte but what else do you need for it to run car.. as i hav not 1 bit of Stock wirin harness,but injector plugs.. Like as i mean does it come with all the wirin to wire my engine to ignition ??? A history lesson would be good thanks... Cruise
-
- 37 replies
- 52.5k views
-
-
Hey, i have got a 5k motor in my sierra ute and it has the points type dizzy. I am wanting to put an electronic dizzy in it so can someone tell me what cars i can get an electronic dizzy that will fit into the 5k motor. I know about changing the coil over to have the ignitor and that but i just need to know what cars i can get one from so i can start to search the wreckers. Cheers
-
- 34 replies
- 65k views
-
-
hey guys my names phil and i own a ke70 wiht a 5 speed 4kc.. well afew weeks ago i drove my car home without a drama, pulled in the yard turned it off and went on my way. when i went to start it again, nothing, not a light on the dash except the charge light. guages wouldnt work, no tail lights, and wauldnt start. so i went looking for fuses not a single one blown, so i started changeing things. first the alt nope no go, then the starter nup then relays and the list goes on so i hotwire it and get it goin yep not a drama, sept charge lights on and still no guages. Today i find a wire burnt out so i replace it bam blows fuses and starts to smoke the wire that was b…
-
- 2 replies
- 2.3k views
-
-
hi i just wana know if anyone knows how to intsall coilpacks on a 4age 16v motor. ive heard that u can use sr20 coilpacks but what else would i need? how do i hook them up? i wana do that since i have a problem with my dizzy not putting out any spark. so it would b nice if someone can share their knowledge about how to install coilpacks and what would i need. thank you!!!! :blush:
-
- 15 replies
- 31.2k views
-
-
I'm in the midst of putting air conditioning from a ke70 into my ke55 (liftback) the problem is that we have a few plugs coming out of the evaporator (cooling unit) and we can't work out what the are for i found an old book that had the ke70 a/c wiring diagram but it is slightly different to my car if anyone has a wiring diagram for ke55 a/c or can help me it is much appreciated thanks, max
-
- 10 replies
- 61.6k views
-
-
Hi fellas, I’ve had my ke70 running perfect with my 5K for ages now but its now electronically rooted! I've lent the car to my brother and he’s messed around with the coil + igniter setup and now I can’t remember how i originally wired it and have lost my diagrams on how to wire it :D so this is what i have distributor with 3 wires bosch igniter 6 pin bosch GT40 coil any help greatly appreciated
-
- 11 replies
- 18.7k views
-
-
My ke70 has h4 bulbs (first keto, not sure if this is normal) and the high beams work fine but the low beams don't work at all. I've tried replacing the bulbs that are currently in my subaru (in working condition) and put them in the keto and no go. I've tested all the wires running to the lights and all of them have voltage. I didn't have a multimeter only a fuse tester, so not sure on the voltage. This is my first post, but i hopefully will be seeing alot more of you guys as I just purchased my keto a few weeks ago and it needs work. Many thanks, Declan
-
- 10 replies
- 7.7k views
-
-
Yeah hi lads just wondering wether someone here might be able to help me out with a problem my mum is having with her car which for the life of me i can't seem to be able to work out. it is a 1982 5 speed four cyl corolla. the windscreen wipers have decided to park themselves semi midscreen when not in use instead of sitting tucked away at the bottom of the screen. i have replaced the indicator/wiper stalk assembley thinking that this was the cause but it hasnt fixed the problem. if i leave the wipers going then turn the key off when they get to the bottom of the sweep they stay there. but as soon as the key is turned on again they reset straight back up the middle again,…
-
- 6 replies
- 3.6k views
-
-
i have a bigport 4age in an ae71 with stock computer when i bridge/short out the diagnostic port/check connector the idle doesnt change and the timing doesnt either. i have two ecu's one i set the timing at 18 degrees with diagnostic port shorted or not and it makes the extractors very very hot. when i plug in the other ecu it say 10 degrees with the diagnostic port shorted or not and still makes extractors very very hot. i looked at the wiring diagram and the diagnostic port is pin "T" then to ground, so i opened the ecu and and grounded the "T" pin and it still didnt change. so I'm a tad stumped at this point if anyone can shed some light that would be gre…
-
- 32 replies
- 110k views
-
-
Hey all! As stated in the title, My horn in my Ae71 is not working. I havent pulled it apart and inspected it yet but I was just wondering what you think it could be? I was thinking either the steering wheel contacts could be corroded orrrrrrrrrrr it could just be the horn assembly itself. Anyone know the average price of a horn anyways? Cheers!
-
- 11 replies
- 13.4k views
-
-
hi guys i was looking over my 4age and my 4agze , both have dizzys but the 4age is 3 wire and the 4agze is 4 , my problem is the 4age dizzy wiring is shot the wires r red/blue/white . and the white isn't even connected can any one tell me 1 can i put my ze dizzy in my ge 2 what r the wires controlling 3 will these broken wires coarse misfiring under light constant throttle cheers phill
-
- 3 replies
- 2.3k views
-
-
trying to order a 4k starter supplier can only find 3k 1200cc are they they the same thing?
-
- 3 replies
- 3.4k views
-
-
hey fellas my AE71 keeps blowing the gage fuse, it will work for bout a minute then blow i have replaced it 5 times now :) any ideas what i could check????
-
- 12 replies
- 3.3k views
-
-
Has anyone heard of a coil by Jacobs electronics called an ultra coil? any feed back on this item would be a real help, thanks, big bloody blue thing are they any good? :P :no2: :( :(
-
- 1 reply
- 2.1k views
-
-
Greetings all! My good friend Brent and I have been attacking the wiring for my JDM 16V bigport 4A-GE conversion into my AE71, but have encountered a problem. As a side note, i'm running a Microtech e420c ECU and silvertop quads, if it makes a difference. I basically need to know which wire connects up to what. As shown in the picture here, the wires on the left are from the hall sensor from the ECU and the wires on the right are off the distributor. Would anybody happen to know which letters / wires connect up to what? I.e. A -> G, B -> F etc. If i've cocked this question up, apologies. Wiring is a mythical world to me. Thanks so much to any…
-
- 1 reply
- 14k views
-
-
I have a 5k with the 4k efi in me ke20 and it runs ok but every time i hook the air flow meter up it seems to choke the engine up and runs it to rich and blows a shit load of black smoke, when i run it without the afm it idles great but when i load the motor up whilst driving (30 kph) in third it back fires and wants to stall even when the accerator is applied slowly, any help will be greatly appreciated :wink: :wink: :hmm: :hmm: :D :jamie: :dance: :bash: :sob: :sob: :sob:
-
- 6 replies
- 4.3k views
-
-
-
Hello, i just wanted to know if anyone has a wiring diagram or knows how to wire the JDM DX Rear Tail Light to a 1983 ke70 corolla, when i got them shipped from thailand i opened it up and noticed the plug from the car doesnt fit the taillight plug. Would there be a connection to suit or just chop and solder them if i find a diagram? edit: picture here of the taillight
-
- 8 replies
- 9.2k views
-
-
i need help retarding the dizzy on my 4k s/c can i use a unit of a blown carbed dizzy can't afford a $500 msd unit are there other options :) :lol:
-
- 5 replies
- 3.3k views
-
-
I bought a KE70 yesterday, with a worked 4k. It has a monster tacho, which I'm moving to replace the clock in the dash. On the back of the tacho it has a switch with three setting marked 4 6 8. I assume these are different settings for 4, 6 & 8 cylinder cars. The tacho was set on 6 and if I change it to 4 it seems like the revs it's reading are too high. Also the needle seems pretty jumpy/shaky when it's set on 6. I know I've read about this somewhere before but couldn't find the info. So what's the right setting for it before I seal it inside the dash?
-
- 21 replies
- 29.7k views
-
-
Hey all, got a problem with my 83 Camry. When i'm driving sometimes the headlights turn themselves on even tho the switch is in the off position. Just the headlights, not parkers or tail lights. Sometimes flicking the switch on then off turns them off. Other times i have to flick the high beams on and off to get them off. And a few times i've had to unplug the headlights. It's a big problem because i don't notice the lights are on and when i go to drive again the battery's dead. Any ideas what could be causing this?
-
- 1 reply
- 2.6k views
-
-
hey all long time browser first time poster i originally had an ae82 twinky which i put a 4agze engine in, i really only changed the engine harness in the twinky. Ive just bought an ae82 sedan which had a 4ac in it which I'm swapping for the 4agze do i need to swap the interior harness or should most of the wires be the same between the 2? they both have the fuse/circuit boxes in the kickpanels, both have the same ignition barrels and steering etc so I'm just not to sure... i have the harnesses out of both cars i just don't want to have to swap them over if i don't need to. thanks in advance big ben
-
- 5 replies
- 5.3k views
-
-
hey guys, i was cleaning up the centre console and installed a set of green LEDs instead of the stock light bulb. made sure they where the correct amp-idge (10) and the worked when testing. i then was removing the wiring for the bulb and some how got the LEDs and bulb on at the same time (bridged with screwdriver i think) anyway i heard a "pop" from the direction of the battery. i have replaced all fuses in the kick pannel because they just looked old and crappy and one was burnt but not blown. i also replaced all the fuses in the battery fuse box but still the dash lights wont come on. can any one tell me why they wont work (LEDs now removed) or better yet wh…
-
- 8 replies
- 17.5k views
-
-
Hey all! Just wondering if someone can help me out here with my question. Question: my cigarette lighter has no wires conected at the back of it and there are also wires to connect to it so I'm stuck with no power to power my gps. Is there anywhere that I should be looking for the wires to connect to the back of the lighter? Or what other ways am I able to get power to it? Any help would be amazing! Thanks, johnny
-
- 6 replies
- 3.1k views
-
-
So today I bought a remote central and alarm kit for all 4 doors of my KE30. However they were going cheap at jb hifi so I bought them without checking if they can actully be fitted. Not a massive deal if they can't I can always sell them. Has anyone ever fitted them to a rolla? And any tips etc?
-
- 8 replies
- 6k views
-
-
ok ive had the ke20 for nearly 2months. yesterday i found out that this car is running a 3tgte toyota engine, with a HOLDEN camira computer. has anyone done this? has it been heard of? and what problems can it face? at the moment its running wayyyyyyyyyy too rich, $30 petty gets only 100k's thats with driving it like a baby also another thing i noticed, the 8 spark plugs are running off one ignition coil. can it keep up? and in the middle of the dizzy cap theres a spark plug cable instead of a coil one ??? am i only running 7 sparks? it does have a large cut out. some1 give me a few pointers.
-
- 9 replies
- 12.3k views
-