Car Electrical
Car electrical gremlins/questions? Ask for help here..
959 topics in this forum
-
The KE has absolutely crap lights by the time they are 20 years old, so I decided to reverse the power flow and fit relays, just like I used to do on the Datsun 1600s. The results were better than I ever expected, showing that the column switch is definately a drag on the stock system. I've put the 'how-to' up in the sub-club KE70.com here- http://www.ke70.com/forum/index.php?showtopic=1856&hl= Its under $50 to do and makes a great difference. Probably similar for all the earlier KE models too.
-
- 9 replies
- 6.6k views
-
-
Hey Guys, in relation to "slab" in rollaclub rides (AE71 with 2TGTE); How do I get the tacho to work? (+ or - wire from coil I am guessing, but soldered to which pin in the guages multi connector?). Also, speedo works, but trip meter and odo don't, sounds like a stuffed speedo cluster?
-
- 3 replies
- 3.5k views
-
-
i just built my ke25 and looking to wire it back up does anyone have a digram where it shows what colours go where ? cheers ive looked everywhere
-
- 2 replies
- 2.5k views
-
-
Hey guys, I'm in the process of building my 3tgte back up and need some help... What does the factory ecu actually control?? Is it fuel only?? Any help would be appreciated Connor
-
- 5 replies
- 11.9k views
-
-
Hello i have a Ke-30 with stock alternator! i recently put an electric fan out of a ford fiesta XR2! but after a few days my buttery died! is it possible the alternator to be to small and can't charge the buttery when lights and fan are on? do you have any solution? thank you!!
-
- 3 replies
- 2.7k views
-
-
hey guys, was thinking of putting some coloured LEDs in the ke70 (more of a joke with some mates than any attempt to make it "cool") just wondering if anyone has hooked up interior led/neon to the head light switch? i been told its a good way to do it but i this is sounds like a bad idea... hard to see at night and... :P to me it would seem easier to just make a new circuit and hook it up to a toggle switch... anyway if anyone has any experience or any tips please do share with me :D
-
- 3 replies
- 2.3k views
-
-
have a ke20 have problems with erratic starting have good battery ,good coil chaecked all electric plugs starter moter.motor is a 5k with 5 speed manual all stock.motor is out of i believe toyota hiace.Once started runs fine.NEW ALTERNATER good points new eath leads,really frustrated.
-
- 6 replies
- 3.9k views
-
-
Alright so i was playin with the 26 today and had it running.... ive installed new lights so i thought ill put them on and see how they look.... problem is they come on then slowly dim to almost nothing.....also have a thermo running through a relay to the ignition switch and this will vary in speed depending on what electric shit is on...... now my question is...... Could this be happenin because of a shit battery, the alternator not doing its job or just old wiring???? Is it drawing to much current for the alternator>??? When it comes to electrical I'm a bit of a retard so any help would be awsome cheers luek :P :D
-
- 1 reply
- 1.8k views
-
-
does anyone know where i can get a wiring harness for a ke11 and does anyone have any spare parts
-
- 3 replies
- 2.4k views
-
-
Hi all, Picked up a tacho dash and swapped over fine, with all bits working except the LCD clock doesnt light up. The old clock worked fine. Is there another fuse I should be looking for? I am guessing the clock may well be u/s. Or is there something simple I am overlooking. If not, I guess I can replace it with an aftermarket one but would like original if possible. Cheers PM
-
- 3 replies
- 5.3k views
-
-
Hey all just put a bigport in my car, loom is all hooked up and I'm having problems with ignition, I'm on the northside and ill pay someone to come out here and fix her up for me. PM me or call/message how much you charge and ill get back to you. Thanks Ian P.S. if its a hot day I can put on some beers aswell :y: 0449695147
-
- 0 replies
- 1.4k views
-
-
my carby mixtures are up the shit so I'm thinking, getting a 3 wire O2 sensor and finding the manufactures valves for rich and lean (.1V lean/5V rich) hooking it up to a multimeter, montior the voltages while I'm adjusting the mixture screws untill i get to stoich sounds like something i can do and reltively cheap ideas?
-
- 11 replies
- 36k views
-
-
I have an AE86 GT-s Gauge cluster that I will be putting in my 1980 Toyota Corolla Liftback with a 3TC and T50 tranny, the stock gauge cluster also has a tachometer. Just doing the change because of the rev limit and speedo is higher. I need the color coding of the 1980 TE72 Corolla Liftback Gauge Cluster wiring and I need the AE86 GT-s wring confirmed, here's the AE86 GT-S Gauge Cluster wiring color coding that I have, just need to make sure that it's correct: White Plug: Black/Brown = Tachometer wire (goes to ignition coil) White/Black = High Beam Indicator - Blue/White = Speed Sensor + Tan/Black spot = Speed Sensor - Red/Green = Door Indicator + Red/White = D…
-
- 2 replies
- 54.2k views
-
-
hey does anyone no which wire out of the ecu is the RPM wire for a 2007 rola?
-
- 0 replies
- 1.4k views
-
-
hey lads, car almost got stolen last night , they f@$ked the barrel so I'm sitting here with it in my hand and i have the loom it says, : AM,ST1, ACC, 16,ST2 on the back of the barrel, question is how should i wire the ignition so i can control it by a switch, should i use the coil wire, or split a wire from the ignition to the switch?? whos had luck with what I'm pretty determined to prevent the car getting taken, or the switch being found, a mate used to run a pressure switch in the floor pan near the foot rest, hold it in when u turn to start to open the circuit, shit like that, any one who can decipher the 5 wires on the back would be a big help cheers,
-
- 0 replies
- 1.6k views
-
-
where do i find the signal for the tacho on a 4AGZE as i have a taco-less nova(rolla) and i wanna put one in. any help would be much appricaited cheers
-
- 10 replies
- 26.7k views
-
-
Ok, here it is, I have purchased a 5K for my rolla, I noticed that there were 3 wires poking out the side of the dizzy, this made me pop it open to have a look, inside the dizzy there is a flat black disk with little slots in it, I assume that this is an "electric dizzy" as I saw something kinda similar recently...... Now, the problem, my understanding is that I need an "ignitor box" to make the car run, so I went and had a good look about for one, but to no avail...... However I found several on other (admittedly bigger engined) cars, all with an "Ignitor 31" sticker on them, would these be usable on the 5K? Due to my complete ignorance of electrics, I t…
-
- 6 replies
- 5.7k views
-
-
hey all i was talking to a bloke the other day and he tends to talk a lot of Sh#t but i was unsure about this one. OK he said that he was talking to a bloke that was running Aurion (Toyota camry) coil packs on his GZE..... is this true??? can it be done?
-
- 4 replies
- 3.2k views
-
-
Yeah does anybody know what it could be?? Is that where the neutral switch is for the transmission?? Please help I need to get it home TOMORROW :D
-
- 4 replies
- 2.5k views
-
-
my alternator is charging a bit low under full load, ive read somewere i can swap the insides out with a ford xe 90amp alternator? can anyone confirm this? and pick a part is having a special $15 alternators this weekend win win :D
-
- 3 replies
- 7.4k views
-
-
i've got a '81 ke70 corolla liftback with a 4k engine. this car came with no tachometer in the instrument panel. after some searching, i found a TE71-s instruments (looks like this: instruments). the main problem is that the TE71 has some extra cables, wich the ke70 doesn't have bulit in. on this picture i've marked the existing (and same) connectors with blue, and the new one with red. i anybody could give me instructions on how to install it properly, i would be very grateful. szipak form Hungary
-
- 0 replies
- 2.1k views
-
-
hi all can anyone help ( yes i have searched) i have a 4kc corolla motor 5 speed and narrowed rear in my project 1965 Honda s600 roadster i mechanically have it all in and a lot of the electrical done, i just have concerns over the alternator its the original Bosch unit from a 1982 ke70, and has two wires. i need to confirm the thick wire goes to the battery and the thin ?? i'm assuming goes to the ign switch via an ign warning light so i assume that when the motor is off and the ign on then the thin wire at the alternator is negative and once the motor is on then the thin wire goes positive, so positive to positive means the warning light goe…
-
- 2 replies
- 2.3k views
-
-
I've poorly installed a dual battery and I understand some, if not all of you may find this stupid. It's just sitting in the engine bay on the floor, connected only by a cable ties which is fine and not dangerous, ie, can't move to contact moving parts, away from heat etc. I was wondering if connecting a lead from it to my positive pole on the original battery, and connecting the negative to the frame is sufficient to give me some more starting torque and not let the lights dim when the car idles. I've had the problem for a while, the car simply drains a brand new battery overnight and I need a cheap fix until I get rid of her. Cheers in advance for your help. :y:
-
- 11 replies
- 4.4k views
-
-
hey guys and girls need a little help, I'm trying to get a rear venition for the back window the only person who is willing to make one is terry not sure on the company name iv got an address of black forest off south rd area, he needs the car for a day to make the template and then all us 15 and 17 drivers have the option of the old school look little reward for anyone who can help me floor matts thanks guys harvie if you can give me a buzz 0439013199
-
- 0 replies
- 1.4k views
-
-
Okay so I've done a tranny conversion bout now my dad tells me that all the transmissin wires need to be connected in a certain order for my car to start (1982 ke70) can someone please help!
-
- 1 reply
- 2.4k views
-
-
There is one for sale with plugs that have been cut off approx 10cm from digital dash. My question is, will this be possible to wire into my ae71, ive decided on an ae82 loom. Cheers Travis
-
- 3 replies
- 5.3k views
-
-
Recently installed an alarm and central locking kit into my ke55. Now every time i turn my ignition off the central locking operates. (If driver door is unlocked it will lock)(if drivers door is locked it will unlock) Any ideas? I have checked my wiring and it all seems correct Cheers Leigh
-
- 1 reply
- 2.5k views
-
-
Hi Guys, This is my first post here, and hopefully I haven't duplicated an earlier post. I have checked and came up with nothing. I am in Bunbury in Western Australia, and I have a 2001 AE112R Corolla Conquest liftback. It's all factory except volts gauge, clock and Pioneer head unit. And it's a manual. I am interested in adding cruise control, especially after getting busted speeding for the first time ever (after 14 years of driving) last year. Was wondering if it's worth calling Toyota to see if there's a genuine cruise kit available or just go and grab one of the Command or VDO brand cruise control systems. Has anyone here had experience with them? DIY fit…
-
- 4 replies
- 7.6k views
-
-
hey just got a quick question, but 1st the car isn't a rolla. i'm changing my vl from manual to auto, and i don't wanna stuff around with swapping over the auto control ecu. i was just wondering is there a way i could wire up the park neutral switch so that the car wont start unless its in park or nuetral? cause i will be leaving the manual ecu in the car. and i'm pretty sure on this part, with the manual ecu it will just mean that i will have to select all gears manually yes? hopefully someone on here can help me out as no one on ct will answer me =[. Cheers Matt.
-
- 9 replies
- 35.6k views
-
-
so ive got myself a t-18 and wednesday it wouldnt start, so i got the jump pack and somehow she started so i got to a servo to get petrol and once again dead as this time jump pack did nothing. so i eventually got a push start to work and was there drove fine volts showed fine and everything. put the battery on charge all day and at the end of the day same issue so once again a push start to get home. so i figured it must be the starter motor as thats the only logical thing. changed that over and alas the same issue still. now the issue is, i turn the key and ABSOLUTELY nothing happens. no cranking can't even hear the starter motor making any clicks or whatever. not t…
-
- 6 replies
- 3.2k views
-
-
Often at night my car power starts to die and my volt lights come one. The headlights dim and slowly the electrics die until the car is undrivable. Dad turned the stereo off and drove it home without a worry. During the day I have the stereo set as loud as i want etc. and this doesn't happen, it's when I have the lights on. Do you think the amp could be draining power and overworking the alternator or something? It's dads theory. Btw, i'd much rather just turn the amp off at night rather than the headlights lol.
-
- 7 replies
- 4.4k views
-
-
I recently bought a 5 inch autometer monster tacho from a workmate, I installed a couple days ago and found a problem with the shift light, as soon as I hit set (4000 rpm) the needle flicks up to (7000rpm) till rpm below set is reduced I thought I soldered the wires for the shift light backwards, I swap the wires around and still the same. I opened the tacho up a while ago to paint it and found 3 wires just hanging in there? but they had eletrical tape on em? maybe there earthing on the casing???? any thoughts or comments will be greatly appreciated Evan
-
- 5 replies
- 3.1k views
-
-
I'm installing a alarm into my ke55 coupe. Just wondering where the hazard light flasher relay would be located! I have found the turn signal relay, but when I hook up the outputs to the relay I can only get the driver side indicators to flash….. Cheers Leigh
-
- 5 replies
- 3.6k views
-
-
I am running a 20 Valve in an AE71 with a Microtech LT10S with the X4 Igniter Box All runs ok, except it will not work with the factory tacho dash. The tacho worked perfectly before the Microtech was installed. There is some suggestion by the person who installed the ECU that my tacho is stuffed but I will have to check to rule this out. Has anyone had this problem before and what was the workaround?? Is it possible to have the factory tacho working? I have the Microtech Dash Display which has tacho function so not overly fussed but I like when things "just work". Also, any tips on where to take it in SA to get it looked at? Thanks Luke
-
- 9 replies
- 8.8k views
-
-
sorry might sound like a stupid question but I'm gonna ask in any way. just bought the rolla so don't no to much about it. just wanted to know if the indicators are supposed to flicker or just stay on? cause of the year model I'm not sure. mine just stay on if i indicate either way! I'm pretty sure there not supposed to! if so what do use think the problem is? its a ke30 75 model two door
-
- 1 reply
- 1.7k views
-
-
OK I bought a JDM 4age came with a loom for a microtech and a microtech lt10s and ignitor, the microtech had the wrong tune for my 4age, and 400 dollar remap, not worth the effort. So I sold it, The stuff I got also came with a blue sticker 4ag standard ecu, now these are an adm ecu yes? Also came with a wiring loom that looks like it suits. Now, I'm wondering what I should do. The wiring loom I have for the adm ecu looks a little messy, I am not sure what it is missing, like it has all the injectors everything, like looks complete, except for 4 wires that come out of the loom that somehow change into like 20ish little wires with cheap single plugs on the …
-
- 16 replies
- 25.7k views
-
-
hey, first question is i have an ae82 electric dizzy which I'm replacing my points dizzy with. i have a new bosh coil to suit an electric dizzy. has 2 wires from the dizzy (green and pink). what side of the coil do these attach to? (1 positive and 1 negative) the other wires from the old dizzy power and earth etc, do they still attach same? p.s. just found out that this silly kent sold me the wrong cap to go with it... cheese bag... thanks, i searched but to no avail :party:
-
- 12 replies
- 20.5k views
-
-
Hey guys, i've searched around and i can't find an answer to my question. I've just recently started changing my slanty face ke70 to a flat face one so in the future i can do the quad healight setup. Why i went about it in the hardest possible manner don't ask, ahah. Anyway, i've refurbished all my parts and stuff and fabricated some brackets to hold the lights in. However my problem is that the indicator wiring is different. The slant face has two positive and one negative because of the two bulbs in the indicator housing but the flat face indicator only has one positive and one negative. I'm not sure what to do. If i don't return the current from that e…
-
- 6 replies
- 7.9k views
-
-
Yeah my engine affects the radio... It sends these little ticks through the radio every "knock" of the engine (my engine is quite load). I've searched around a bit and everyone seems to say that this is because of bad wires. I'm just curious which wires I should check and what I should do to fix them. Cheers.
-
- 7 replies
- 3.8k views
-
-
hi all i have just recently bought a ae82 with a blacktop 4age engine installed.the problem is that it has a auto gearbox and is driving me mad.I'm looking at converting it to manual but I'm not sure if the auto ecu will be ok to use with the manual gearbox. do i have to bridge anything out at the ecu in order for the standard ecu to work? i have been told that the auto and manual wiring harness plugs are different. any help with this would be greatly appreciated.
-
- 1 reply
- 192.9k views
-