Car Electrical
Car electrical gremlins/questions? Ask for help here..
959 topics in this forum
-
G'day guys, I have a problem with the cigarette lighter in the wifes 96 Seca. The nut that holds it in to the centre console has come undone, I have tried putting it back on but cannot get my fingers through the ashtray opening and cannot reach it from the back of the console. Can anyone help with instructions on how to remove the centre console trim so I can do it up again. I need to get it fixed so the wife can plug the GPS in. Regards, Barney.
-
- 4 replies
- 3.7k views
-
-
well a few weeks ago the alternator decided to give up the ghost, to be expected i guess, i was looking abit worn out, anyway, went to the wreakers to get one, went to fit it, found out the tension adjusting bracket was not inline, so i just hammered the smeg out of it, to make it straight, as any bodgy hoon would do, went about fitting it, to find, it was stuffed, pasted the 7 day return, money down the drain. Next adventure, off to repco to buy a new bosch unit, i ring first to find where they would have one in stock. enoggera store it is, get there, "O no, it would be up the road at checkpoint, repco owns them too" ok, up the road i go. ask for the alternator, ou…
-
- 5 replies
- 8.7k views
-
-
Heya, I'm a Corolla fan and have had 6 Corollas in the family an 88/89 twincam (awesome to drive), 88 stocky sedan (was a family beast), 91 corrolla seca (still have), 02 Hatch and now the 2005 ascent hatch. Unfortunately i don't know much about the the stereo systems and my CD player in 05 hatch keeps coming up with an 'error 1' when i insert a cd. Radio works fine and this is about 3 months out of warranty. I don't want to fork out $300 to fix, i hoping someone on here would be able to help me out? If anyone can give me an tips/ideas/suggestion on how to fix this prob it would be greatly appreciated. Thanks, PJH :lol:
-
- 3 replies
- 93.8k views
-
-
Just wondering about getting a tacho in my car. I drive a 87 hatch. I've heard from a few people that a similar model dash will plug straight in and the tacho wires are already there. I'm wondering, if I bought a custom tacho from somewhere, would it plug straight into the existing tacho set up? If not, what would I need to wire it to, to get it to work? Cheers, Tim.
-
- 1 reply
- 2.4k views
-
-
Hey fellas, Over the last month ive been noticing that once in a while the car doesn't start easily, and struggles to turn over indicating battery charge issues.... it happens at random times, not just when it hasn't been driven in a while. It gets probably at the most 50kms a week drive time, and most of the time it gets cruised very gently (i'm in fuel miser mode)... tonight as i went to leave the house it barely started, and i hit traffic, where it was basically idling for 15 minutes in stop start very slow traffic... i went to start it 4 hours later and it would barely turn over, and didn't start. I jumped it and it started fine. Gave it a spirited drive home …
-
- 4 replies
- 8.6k views
-
-
Hey all Just wondering if there is more then one type of KE30 wiring loom? just asking because i have had to replace the one that was in my car as it was cut for a 4AGE. Ive got a standard now and am in the mits of putting it in. I searched and read for while, and am wondering what is the difference in the internal and external alternators? and is the loom the same? Also my car has been fitted with a KE55 dash, will this cause problems? Any info will be great, will keep searching, but more help the better Regards
-
- 8 replies
- 7.7k views
-
-
Well this is really shitiing me off.. I havent started my car in about a month and tonight i tried to start it i got mum's battery out of her falcon and wacked that in the rolla and it first started to turn over quite nice then it started to die a little bit, then i turned the key one more time and nothing no dash lights nothing so i put the battery back into mum's falcon and tried to start it was a little flat but let the falcon run for about 5 turned the falcon off then on and not a problem so then wacked it back into the rolla and nothing at all no dash lights nothing. HELP HELP HELP :lolcry: about to go and clean the terminals AGAIN but i can't think of what it …
-
- 3 replies
- 3.2k views
-
-
my ke20 wont start, it gets power to the startermotor and that turns over, but i can't get any spark from my leads, there is power going to the coil but nothing coming out of it. so i guess what i am saying is what makes the coil colapse and make that huge aount of voltage come out?
-
- 3 replies
- 3.8k views
-
-
hey guys need some help/advice with wirring up alternator its the stock type with output b on the thread with a nut and a circle plug on back with 3 wires sense,ignition and lamp wire 1st Do they have a built in regulator??? 2nd i have wired pin b with tread dirrect to battery and didnt use the plug with 3 wires and it don't charge if i wire up the 3 wire plug will it start to charge??? 3rd what does the 3 wire plug do and how is it connected??? i have a diagram from a moderator posted on here and it says s= 12 volt reference so i guess this is linked to b along with battery wire l= dash lamp charge light ig= igniton switched source so i guess this …
-
- 11 replies
- 65.8k views
-
-
hi all i have a good one for you guys this time! :D ok, so heres the story. ragin has started acting up again. first thing in the morning at about 5am when I'm going to work she starts first pop everyday, then at about 1130am when i am leaving work to come home she starts fine again. later on in the arvo when i wanna go to the shops or something i try to turn her over and the starter motor sounds like it having heaps of trouble trying to turn the crank. i turn the key and nothing at first but i hold the key on and very slowly itll give one revolution then wait a bit and then another and if I'm lucky itll start on one of these slow revolutions. but then in th…
-
- 13 replies
- 4.3k views
-
-
Hello All, got a slight issue with my ke70's fuel gauge. I did the 4age conversion a while back and a couple of months ago got around to installing an intank lifter setup (flowing to VL external pump). Had to drop the tank to do that, and got it all up and running. Only problem now is that the fuel gauge doesnt work properly. I've done some searches and found some info, but hasnt helped me sort it out. It does work though, kinda - if i take it out, put it back in and check the gauge it'll show the current fuel level - it just wont go down or up after that if i use the petrol/fill up. Pulled the unit out of the tank and had a look, and made sure there's sufficient …
-
- 6 replies
- 10.1k views
-
-
Just need a little help Plug 2 is Fuel Solinoid Obviously. But where does it plug into? Plug 1 is male like the fuel one and plug 4 is like a twin bullet female plug. what do each of these do and where they go? Also in circle 3, the is a nut on the alternator, what comes of that? i got the 3 pin plug in (external regulated alternator btw) i guess it goes to battery somehow to charge it? any help be great, ive searched, looked at pics. and it seems I'm missing some wiring?? :) edit, Forgot pic :hmm: Sorry its big, just easier to see
-
- 2 replies
- 3.9k views
-
-
Can anyone tell me where the location of the fuel pump relay is in a ae82. Thanks
-
- 8 replies
- 13.7k views
-
-
Is this part of an electronic 5K distributor classed as the ignitor.
-
- 14 replies
- 4.7k views
-
-
-
hey fellas. just bought i tacho got it all wired up sweet. only problem i need to wire a yellow wire up to some where to get the tacho lights to come on when i turn my car lights on.. any info would be sweet cheers cam
-
- 5 replies
- 2.6k views
-
-
Hey guys, wondering if anyone knows how to get the tacho working in my ke20, dash cluster is from a sr coupe so has tacho. I had it in my 1973 ke20 and it worked, now iv done up my other 1974 ke20 and it dosnt work. What Do I Do? Cheers
-
- 3 replies
- 4.1k views
-
-
i was wiring up my new number plate lamp worked fine and then i went to test it for a final go and my headlights turned on but my parkers, lights around guages,redlight that turns on with head lights at tail all didnt work and neither did number plate light!!! please help i need them on urgently. cheers i havee checked fuses they look alright, i can't find any that say tail or have any relevance to what has turned off. which ones should i check and where?
-
- 8 replies
- 2.3k views
-
-
hey i got this plug has 5 wires, the 2 yellow ones go to water and oil sensors what do the red in the middle and the reds on the sides go/do cheers
-
- 5 replies
- 3.5k views
-
-
I did a search, but my electrical dizzy swap comes from a Starlet(kp61). I am doing an electric ignition swap on my KE20 and just need some things cleared out before I go on with the swap. Below are some pictures to make it easier to describe. A. I know this connects to the distributor B. Positive? C. Ground? D. This is my original distributor on my KE20, not really sure where this would connect to on my electrical ignition setup. Does it connect to wire A or B maybe?? E. Not really sure if this ignition coil will work with my Starlet distributor. This is from another model.
-
- 4 replies
- 10.4k views
-
-
As the heading says I need someone with greater electrical knowledge than I possess to help me out with the wiring in the swap. I have many wiring diagrams and have a multimeter, but am still bamboozled. Can anyone help. Thanks
-
- 0 replies
- 1.8k views
-
-
-
Hey, I wonder if anyone can help me... The reverse lights of my Automatic ke55 only come on when the gear shift lever is in neutural. Can anyone help? Thanks
-
- 3 replies
- 2.1k views
-
-
hey I'm rying to fix my sisters car beacse in the morning when she goes to start her car it wont turn over fast it goes really slow and the neagitive lead get really hot so we chucked another batterie in and it went fine and after about 2 weeks it done it again it seems to go through a few batteries what could be the cause of this please help
-
- 1 reply
- 2.5k views
-
-
Hi.... I've been playing with this thing for the last few days and can't work it out. The car is missing the front blinkers/parker's but I don't now if there needed to complete the circuit? D/S blinkers work (rear & side) P/S rear blinker works (side blinker not working) Number plate lights not working at all Head lights, tail lights and brake lights work, but when the head lights are on the P/S blinker comes on and stays on (rear only) Just wondering if there's a common fault/easy fix, or just something I should be checking. I've had a poke around with a dodgy test lamp with no real success. I spliced the no# plate light wires into a hot …
-
- 8 replies
- 4.2k views
-
-
just wondering what people have used to replace there original headlights in a KE30. the round ones. My coupe had the KE55 square lights, ive removed them and fitted the round grill, just wondering if i could use something like these Are the KE30 lights 7"? Not looking for soemthing super pricey, just something cheapish like them.
-
- 14 replies
- 9.4k views
-
-
Hi, my rear demister on my ae82 seca is not working. The element stuff on the glass has been sunburnt or something and due to the age of the car every line is broken somewhere. I want to tint my windows soon but i want to fix this problem first. Is there some kind of rear demister sticker you can buy or do i need to replace the rear window?
-
- 2 replies
- 4.1k views
-
-
Hey all, Its funny because ive seen this on other older cars and had a laugh, now its my own... Anyways just got home from driving in rainy sydney, and the right hand side blinker is blinking way too fast... is this a relay issue? if so how do i change? where to get from? where is it located? any tips fellas?
-
- 3 replies
- 2.6k views
-
-
Hi, i have been looking for a 20v MAP sensor to fit into my bt converted AE92.. I initially never had one in there. Now when i fit it, the car turns off.. Has anyone had this problem before?? Please is there a solution? I'm going to go crazy :lolcry: lol.. Is there some special way of fitting it that i don't know of? Thanks all.. I realise this may have been covered before but i really have no time to search through old threads for days as i need to get the car rego'ed in two daySS!!! HEEEEEELLLLPPPP!!!
-
- 12 replies
- 4.5k views
-
-
hey. ive been trying for weeks now to get the 4age in my ke70 to start with no luck i found out on friday it was the immobilizer. ive since got rid of the immobilizer. ive got power going to the coil, i know that 4 sure. and the starter is cranking. but theres no spark even reaching the distributor! only thing i can think of is the coil is f@$ked, i'll swap it over 2nite. anyone got any ideas?
-
- 7 replies
- 3.8k views
-
-
-
Hi All, Having problems starting my rolla - looks like a battery issue. The dash lights turn on and when I go to start it, nothing happens and the dash lights turn off. The car hasnt been driven for a while and was told that I needed a new battery by my mate who had the car. I used my multi-meter and it showed 12.3 volts - this reading may be right however can the battery still be stuffed?? Any help would be appreciated. Regards, Leon
-
- 12 replies
- 5.6k views
-
-
Deleted
-
- 15 replies
- 26.7k views
-
-
my problem... my brake lights both work fine but when my taillights are on one of my brake lights doesnt work why could this be... is it a wiring issue?? how can i fix it... cheers
-
- 15 replies
- 5.5k views
-
-
Hey guys. My KE55 Fuel guage has not been working since I got the car, thought perhaps it was because we had less then 10L of fuel in the car, filled the tank the other day and still nothing. Checked the cable that connects to the tank and it has power, so what else could it be? A Dud tank? Anyway to fix it? I dunno anything about this, nor does my Pa. Cheers
-
- 4 replies
- 4.1k views
-
-
Hey Guys, Kind of a noob question (sorry) :S I just realised that my 1971 KE25 has no lights when I put it in reverse, I just wanted to confirm if the old KE25 actually had reverse lights from factory?? I have to take it for cert next week and just need to sort out all the little things to make sure it passes. The old 4 speed box has been replaced with a 5 speed to match up to a 4k, so I believe from research that it must now have a K50 gearbox? If the car does come with factory reverse lights does it mean that the signal line hasn't been connected when the gearbox has been replaced? How simple is this to hookup? Any info/help appreciated! Cheers…
-
- 8 replies
- 3.5k views
-
-
Hey peoples, Not so much a Rolla question, as an old school Toyota question. Yesterday the brake warning light on my 1980 Hilux came on and hasn't turned off. Now I've got a pretty big bullbar on the front which I can use for braking, but I'm not sure the cars in front would appreciate that. Anyone got an idea of what my car is trying to tell me? Peace, Ben
-
- 8 replies
- 3.4k views
-
-
Ive had this problem for a while and its really been bugging me. When i flick my high beams on, all my lights go off, but if i pull it bak, the high beams work fine. I pulled the cover off around it all and cleaned the crap out and still has the problem. I dunno why it is doing it or even how. Has anyone else had this problem and know how to fix it? thanks, Calam.
-
- 7 replies
- 4.6k views
-
-
i put a new horn button in the car today and decided to test all the lights etc. flip down the indicator - the hazards come on, the instrument cluster and air con lights flash with them. this happens left and right turn the hazards on - the instrument cluster and air con lights flash with them turn headlights on - when trying to indicate either way the indicator freezes when lit up and wont flash, this is on highs and lows when high beam is on - the blu light wont come on 2 let me kno the highs are on
-
- 6 replies
- 4.4k views
-
-