Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Car Electrical

Car electrical gremlins/questions? Ask for help here..

  1. Started by awvg,

    So prob shouldn't have just gone and ripped the engine out with out thinking much about how it is going to go back in... but anyway, I'm re wiring the engine bay on my 55 to hide all the wires and just need some help to identify these plugs.... 1 - Passenger side - Green plug - black/yellow wire and black wire (earth) and Black plug with two black wires (earths) coming out of it (bottom two plugs) 2 - Passenger side - green plug - black/yellow wire 3 - Drivers side - green plug - 2 x red/blue wire and a black wire (earth) 4 - Drivers side - white plug - green/yellow wire thanks guys

    • 3 replies
    • 3.3k views
  2. Started by trav_555,

    WEll my temp gauge wont go very high, my car is running 2mm below cold according to the temp gauge, my old engine didnt used to run that cold, i flog it but it wont heat up, i mean its got the bonnet scoop which stops it heating up ALOT but surely not that much. should i swap back to my old water pump for same plug goodness? cheers Travis

    • 6 replies
    • 2.3k views
  3. Started by Bowler,

    Howdy folks I have a Reco'd Bosch starter motor for A model of corolla....just not sure which one. Housing number is 9 001 065 Motor number is 9 000 062 Solenoid number is 9 330 061 050 from the Jaylec website, it looks to be possibly suitable for a ke30, however, due to Bosch having no useful product listings, and Ashdown-Ingram only having catalogues available for retail/trade customers, I can't really bring up much info on it.

  4. Started by oldeskewltoy,

    Has anyone seen a factory wiring diagram for an AE72 currently available online? I have an AE72 coupe... swapping in a 4AGE with complete aftermarket management. It would ba FARRRRRR easier to use a manual then to GUESS!!! Does anyone know if it might still be orderable(like the AE86 manuals are)?????? Any help you have............ will be very appreciated! I LOVE the internet........ a wee bit of searching, and VIOLA.......... JACK POT!!!!!! Faxon Auto Literature!!!! I have one FSM and one wiring manual on the way!!! For 1983!!!!!!! $79.95 for both... including freight!!! Available through these links - http://www.fax…

  5. Started by Jimpoole,

    Everytime I switch on the headlights in my 1979 KE55, the gauges for fuel and temperature drop to zero. I wouldn't know the first place to start when trying to fix this because there is a little issue: it's not consistent-it dosen't always happen. As I said, i've got no idea. Has anyone else had this problem, and if so, how do i fix it?

  6. Started by mundawg,

    fixed it was the resistor

    • 0 replies
    • 1.7k views
  7. Started by Robbo!,

    hey, after reading the topic in the knowledge base on how to install an aftermarket tacho to a ke70, i still don't know what to do. On the back of the tacho there are 3 wires, black, red and green and there are 2 other wires, orange and black that go to a little bulb in the back of the tacho, could someone give me a simple diagram i can follow to wire all this up. Also, the guy i bought the car off, did all wiring himself so the car is a mess. the car will not start without the Altmeter hooked up. Can anyone hook me up with a simplified electirical diagram for a standard ke70. I had a look at the electrical diagram in the gregorys service manual and made no sense …

    • 1 reply
    • 4.6k views
  8. Started by fozz,

    hey guys i got a 4age in a e7 and my altenator is not charging i have no clue whats wrong it was working but now it stopped and my batterys completly dead and the batterys only two weeks old any help apreciated cheers

    • 11 replies
    • 3.5k views
  9. Started by shirerolla,

    hey guys got a ke70 with no tacho thinking about buying one just wondering if there hard to install and whats involved and what should i set the max at, like redline , its a 5 speed 4kc cheers

    • 3 replies
    • 2.2k views
  10. Started by TheBeast,

    So there it is. I just picked up my new baby and she runs good but a lil cold. I just changed the thermostat and that helped alot but still not getting fully up to temp. Ive gotta assume its the RAD FAN being on all the time. Searched around couldent find much so I was wondering what all of you have for me. Thanks for the info.

  11. Started by trav_555,

    ok i have a new 4k but there are wiring problems a. no where to plug into near oil filter, another plug on that same lead unknown where to plug into b. wiring on electronic dizzy, as opposed to stock dizzy, it has a plug on it that has 2 spots for wires, where do they go and which goes where? c. on altenator its an aftermarket one with 3 spots for wires and a screw on thing, where do they go as old one only had 1 spot for a plug and one for a screw on thing d. mechanic says that with elec dizzy i need another thing as well as coil??? i just got a coil off an elec dizzy what else do i need now wtf?? help help help asap need it wired and running!…

    • 5 replies
    • 3.8k views
  12. Started by greenmac80,

    ok 4ag into ke30/55 few questions. wiring the two together. obviously you need to wire your ignition switch into it. give the ecu constant power. question is though. how to wire the fuel pumps? do they got o the ecu? or to the body loom? same with the starter motor? also is there a control module that controls the idle when headlights etc come one? in the body loom? because i would like to wire this into the ecu. please help. been going absolutely crosseyed looking at these diagrams! Littleredspirit? or chris gt? you guys help?

    • 9 replies
    • 6.5k views
  13. hay guys I'm having some trouble wiring up my ca every thing is in i just need to hook all the electrical up, i need to splice the alternator wires run the knock sencor to the computer hook up the power whire for the computer ect I'm having trouble finding any diagram for the 71 or ths s13 can any one help I'm sure there is a thread on it somewhere in here just can't find it cheers byron

  14. Started by h1_roll4,

    I'm not sure how to change the wiring from the 4k wires to the 4age ones. the 4age alternator has 2 extra wires the two wire plug coming off the fuse box the 4k plug, pretty sure its + and - 4age plug, has the big + wire and 3 wires coming off the plug need to know what the other wires are for. any help. cheers

  15. Started by Kaz,

    Hey, how you going guys. I've got a AE100 Corolla (Import). Reverse lights are not lighting up. At the same time the reverse gear status light on the dash is not lighting up and reverse warning tone is not beeping anymore. Could it all be linked together?

    • 2 replies
    • 2.9k views
  16. Started by unever,

    my right indicator has stopped flashing. the left one works fine but the right one when you turn it on, just stays on but does not flash. also only at the front it has completely stopped working at the back indicator. could it be the relay, if so wheres it at? cheers

    • 2 replies
    • 1.8k views
  17. Started by Falken_KE30,

    Just a quick one. There is a plug coming off the starter motor thats green and has 2 wires attached to it. Now I'm guessing this plug is to actually start the car with the key? one wire is Red, and the other one is Black with a white strip. the red one has broken off inside the loom somewhere and i can not find where it goes. Now I'm sure that the black one is Earth, and the red one is power for the key when its turned to "start" ? if so where can i attach this broken wire? obviously not to a continuous power source, nor one for accessories.. :wink:

  18. Started by zilli,

    Hey fellas, Over the last couple of fillups, ive noticed with a full tank the fuel gauge is about 3 mills under the full line... SO i have a couple of questions 1) Is it something i can adjust or fix? any ideas? 2) Does the fuel light become engaged through a sensor in the tank, or based on where the fuel light sits? Cheers

    • 4 replies
    • 3.3k views
  19. Started by JiP,

    Hey, my KE30 is beginning to give me the shits. A couple weeks ago I lost my Fuel Guage, Temp Guage, Demister & reverse lights. Turned out that it was my "Demister" fuse. Then Monday Arvo the fuse broke again, I replaced it when I got home. Then when I started the car in the morning it wasn't working, so I replaced while driving to work. Then it broke less than 100m down the road. I haven't changed it again, but would like to know if anyone could shed a light on what they think the issue may be?? thanks, Jon.

    • 14 replies
    • 4.9k views
  20. Started by Falken_KE30,

    Just curious on how these work? http://cgi.ebay.com.au/MSD-6AL-IGNITION-CO...1QQcmdZViewItem I'm guessing it hooks to coil and dizzy, and allows for better spark??

    • 2 replies
    • 2.6k views
  21. Started by ke30Rolla myles,

    i was driving home and it started raining really hard the car fogged up and i could not see were i was going i had to wind my window down and get all wet just to get home what do u recon is the problem with my dimister

  22. Started by Falken_KE30,

    okhave read thru the FAQ, done a bit of reading on forums. and I'm still lost. electrical stuff isnt my strong point. Anyway, i have Denso external regulated Alternator. it has a 3 pin (i think) plug that connects to the back. and next to that is a Pole with a nut on it. from what ive read its the "B" pole??. To charge battery i presume you need a wire from the B pole to the + of the battery yes?. In the FAQ it also says the "main relay" has a wire that also goes on the B pole.. where and what does this "main relay" do? Here is the pic off the FAQ...

    • 2 replies
    • 2.1k views
  23. Started by beerhead,

    I don't know where to post this to make it a useful reference, so here it is. Earlier today a mate and I got his bigport running properly on a LTX-8 running wasted spark. I'd tried for ages to find a cheap CAS, but they're very over priced. If you order the wrong microtech for a bigport they'll charge you $300 to make it run on a single coil too! Solution: All I did was remove 3 of the 4 prongs on the top "home" wheel with a grinder! I've heard of people doing it, so I thought it was worth a try. After this mod, we still had no spark, but it'd try a little to fire, I figured it was a weak signal. Bigport dizzies have only 3 wires on the plug, so to get i…

    • 3 replies
    • 16.7k views
  24. Started by djbausch,

    Heya guys first love tha rolla club next can any one shed any light on what i've done? my KE20 is very problematic ATM 1.When indicating left and braking at the same time the indicator stops flashing sometimes happens when I'm not braking 2.my battery light is always on but sometimes it is less dim than other times 3.my fuses seem to pop pretty quickly too sometimes within weeks of replacing them used to be fine before i replaced the ol manual fuel pump with an electronic one i've got the electric fuel pump wires going from the battery to the ignition then back to the pump and grounded out on one of the strut screws thanks dudes.

  25. Started by Gspec,

    Are there any text books or reference books that is required for apprentices or recommendable. I am aiming at getting my qualifications through an RPL but because my feild is so broad yet so specific any additional knowledge/reference would be definatley helpfull. :y:

    • 7 replies
    • 6.5k views
  26. Started by rundell,

    Well ive just added my turbo to my 4k and now when i turn the key on the ignition it turns over for a few clicks but sounds flat but the battery is charged and i have also tried jumpstarting it and it still wont click over properly :y: Does anyone know what the problem could be? help would be appreciated because car wont start

    • 13 replies
    • 3.6k views
  27. Started by ae20v,

    hi guys got a ae82 20v stock ecu starts fine but once it warms up wont idle and stalls till i turn it of and it cools down also does anyone know how to do the tacho mod so it stops cuting out at 7200rpm thanks

  28. hey guys, Dregs here my old '83 slant face ke70 is having some electrical problems. i recently got a tacho that i'm building into the dash where the old radio was (did this instead of getting tacho dash as i like the clock) and i was testing the tacho by just putting it on the radiator and connecting the signal wire to the coil, power to the positive battery terminal, earth to the negative and firing the car up. It all worked good but as soon as i got into the car i noticed that the clock doesnt work anymore! :y: then i opened the door later that night and the interior clock doesn't work!!! :y: i check all the fuses that are in the car, and i even checke…

    • 8 replies
    • 11.5k views
  29. Started by wilson_610,

    hello fellow members. I'm wondering what the best option is in relation to getting a plug for my 20v ecu. I'm after the 12pin (PLUG L, so I'm told) but I'm not sure what other cars have the same plug. teddy suggested that i get the plug moulded to the ecu, but the shit hole i live in there isnt an auto electrician that would/ can do it. also the ignitor module plug is missing.

  30. Started by csi_roller,

    my lights on my dash where the heater controls are not working only the air con and ecomony buttons a elimuating is there a fuse any where for them also how hard is it to get a cluster from a csi limited fitted to my ae92

    • 3 replies
    • 3.7k views
  31. Started by redae71,

    hey all if anyone has the wiring diagrams for an ae71 could you please scan and send me a copy? my email is [email protected] any help would be much appreciated and a real time saver. i have a custom loom already made for my ca conversion but wiring diagrams would be much quicker than testing and tracing every wire. cheers

    • 4 replies
    • 15.8k views
  32. Started by juligan,

    Hey, when i have the lights on at night in my ke55 the charge light comes on. The car also often stalls itself if u leave it in drive without the choke out when u are stopped at traffic lights with the headlights on. Do u have any ideas what it could be, or how to fix it?

    • 7 replies
    • 4.4k views
  33. Started by Rob74coupe,

    my windscreen wipers stopped working today :) anyone know what might be wrong? also the blue highbeam light on the dash sometimes flicks on for a second but never stays on.. the gear selector light didnt come on either but there was enough current to switch a relay so i just did that instead... anyone have a ke20 wiring diagram so i know how to wire a relay onto the highbeam light thing and fix the wipers?? is more stuff gonna keep stuffing up? is my cars wiring rooted??? cheers, rob

    • 4 replies
    • 4.3k views
  34. Started by DouggehKE30,

    Probly somthing that i have to get the ole multimeter out, and find myself but i am slack..... Basicaly, when i turn the demisters on, the charge light comes on, it isnt bright it is dull. But i think the demisters still work.??? Just wanted to be shown in the right derection, baring in mind i am not the bigest automotive guru. Cheers Doug

    • 5 replies
    • 5.4k views
  35. Started by brendan,

    hey people i am just about to paint my car and people are telling me to run the wiring first is there any electricain out there that has wired a ke25 up because i want to get mine done I'm placed at western suburbs of nsw cheers

    • 2 replies
    • 1.9k views
  36. Started by Trev,

    Hey guys, The other day i had to find a way to repair broken dizzy wiring on a 4age so i just cut the wiring down and repinned it, I did the same thing to my car today when i made the wiring harness so i thought id do a step by step guide for the FAQ. Pictured is the plug with broken/exposed wiring: Tools required (3mm heatshrink, Lighter or heatgun, Narva plug connector pins, Plug connector crimpers) : Step 1, Cut off the wires and remove the grommet: Step 2, Remove old female terminals by using a skinny pointed object to push on the holding tab while forcing the terminal out of the back of the plug: (Picture of holding tab): Step 3, Ide…

    • 9 replies
    • 26.8k views
  37. Started by ke20 king,

    I'm just putting a 4k in my ke20 and can't get spark when it had spark before when i had the engine in!! does any1 know which wires go where on the coil i can't remember bit brain dead at the moment haha

  38. Started by 4age_ke,

    ok, i have recently become the proud owner or a 1980 ke70 twin headlight 68000 original km beauty. i decided to chuck a 4age in it and being an aprentice mechanic its not been hard so far, as the dx came with a half stripped ae70 complete with 4 speed k40(not a very common box i have found out) i decided I'm goin to run with that for a while. i got a ae82 fx-gt for the engine and loom, buuutt, not being very clued up in the auto sparky bizzo i just basicly put the hole loom from dash forward in the dx, which resulted in a shit load of wiring with more than a few fuse boxes, iv hooked everything up includind a VL fuel pump , but lo and behold when i win…

    • 2 replies
    • 6.4k views
  39. Started by Falken_KE30,

    hey all, Just curious as to how many ground wires you all run? Obviously the one from - terminal to chassis, and then i know i got one from block to chassis. Been reading and have found 1 or 2 more ground wires don't hurt, and will help with motor cranking over, idle smoother, brighter lights ect. anyone shed some light on this?

    • 2 replies
    • 2.6k views
  40. Started by smeetsy1,

    Recently my 'normal' headlights have gone, its quite fascinating because my high-beam and parkers still work. So at the moment i have been driving around with high-beam on all the time, i feel sorry for oncoming traffic but I'm pretty sure my car is too low to bother them! Tonight when i was driving i was waiting at the lights to turn right, so i pop on the indicator and it flashes for a couple of seconds and then turns off, much like my 'normal' headlights... wtf? and it kept happening throughout the night :P So now i am having to throw my hand out of the car to turn the car whilst having the high-beam on - must look like a twat.... Summing up, has any…

    • 5 replies
    • 3.1k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.