Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Car Electrical

Car electrical gremlins/questions? Ask for help here..

  1. Started by YLD 10S,

    As you can tell I am having trouble with my tail lights. My park lights (Front and back) don't work and my left brake light doesn't work, but my indicators do?!??!?!?????!?!? Gremlins 1 Me 0

    • 4 replies
    • 2.4k views
  2. Started by Alexrx7,

    Hey guys just need my wiring to have a final check over by a professional and check why my starter motor is playing up. Needs to be mobile and on gold coast cheers.

    • 10 replies
    • 4.8k views
  3. Started by ausca62,

    Hi Guys I have an Autogage tacho by Auto Meter But I have lost the wireing diagram. It has 4 main wires, red,black, green & white. 2 small orange & 2 small brown wires. and 2 black wires together with a plug on the end. I would assume the latter to be the shift light but could be wrong. Thanks for any help. Paul.

    • 4 replies
    • 3.4k views
  4. Started by jimi91,

    Hey guys I'm looking at converting my Ke15 to a coil over system. Ive been looking around for what module to use to run this ive found one thats cheap and easy to set up :happy: Plz go to my topic and have a look and plz help me !!!!!! see ya jimi

    • 2 replies
    • 2.6k views
  5. Started by GiGas,

    Hi folks. My native is Danish - excuse my "dinglish". I am in the middel of implanting an Japan AE101 4A-GZE engine in an Euro AE82. Manny people over here choos to modify the AE82 ECU and AE82 engine wiring, but I see manny piston meltdown when that method are used. I have choosen to install the ECU and engine wiring from the JAP donor AE101 4A-GZE, this include replacement of the J/B No2 and a lot of re-wiring to J/B No1 and J/B No4. So fare I mannaged to finde wiring manuals holding diagrams over the AE82, and have all ECU pin outs diagram over the Jap AE101. And, as of to day, most of the wiring job are all readdy don. I do still have a few unsolved wiri…

    • 1 reply
    • 8.7k views
  6. Started by bally,

    Hey guys I've just got my KE70 up and running with the 4AGE. I wanted to know how to connect up my temp and fuel gauges on my dash. I've been googling it and its just seemed to confuse me a little. But I'm pretty certain that the plug on the fire wall near the brake booster is for the cluster?

    • 8 replies
    • 22.6k views
  7. Started by Ae71Rola,

    Hey guys ive come across a problem... i have no dash lights whhich have just recently gone out completely, previously they only went out wen the left indicator was on and they would flick off... so none of the dash lights work but the gauges still work perfect! ive check all the fuses and they look fine to what i can see! Now i also have no tail lights but have break light and headlights! the globes are fine and same with the fuses If anyone can help with the problem that would be greatly appreciated Tom

    • 9 replies
    • 7.9k views
  8. Started by fkj,

    Will an ignition barrel from a 1989-94 corolla go into a ke70 without difficulty? Cheers Jake

    • 3 replies
    • 2.7k views
  9. Started by RA28GT,

    Hey guys I'm going to have a go at wiring my quad headlights on my ke20 so that i have 4 sets of low beams and 4 sets of high beams. Is there anyone that can run me through how I'm going to go about this? Currently i just have the outside lights wired high/low as per standard and nothing to the inner headlights as of yet. It has been done, although the pictures no longer work in that thread! http://www.toymods.org.au/forums/showthread.php?4873-How-to-swap-in-QUAD-Semi-Sealed-H4-Headlights-(old-celica-etc)&highlight=headlights

    • 3 replies
    • 11.9k views
  10. Started by shooter6,

    Hi guys i tried to search wiring for my o2 sensor for my te72 or 1980 toyota corolla 3tc engine. I need help where to plug my o2 sensor. Does any one know how to wire it up and where does it connect thanks

  11. Started by jono1986,

    Hey guys didn't know where to post this but does anyone know what these lights are from? Cheers

  12. Guys I'm not sure if I will have a problem or not, but from some discussion with the Auto Instruments repair guy, he reckons that old tacho dashes (KE10-11-16-18) will have trouble showing accurate readings on cars fitted with a later model Electronic dizzy. I've done quite a bit of googling but haven't found much more info on it. I figure that a few of you doing tach dash swaps must surely have encountered this issue. Any idea what circuitry and goodies I might need to get it working correct? I've found a couple of bits and pieces of reading but I'd like to hear what others have come across.

    • 9 replies
    • 8.9k views
  13. Started by buz25,

    Hi, Was wondering if anyone knew someone in brisbane to help with some custom wiring.I've put a 12a turbo with microtech and a new wiring harness into my ke25 and am stuck on a couple of things. Thanks Tony

    • 8 replies
    • 5.7k views
  14. Started by Burcoty,

    I'm wiring up a st20v 4age into an ae82.

    • 0 replies
    • 2.1k views
  15. Started by altezzaclub,

    I'm looking at CDi ignition vaguely, the Jaycar website is down today so I'm surfing all sorts... I came across a well-written piece here and wondered if anyone has modified the advance curve inside their dizzy. As the author notes, the stock curve is for reliability and lack of warranty claims rather than performance, so there might be some gains to be made. http://www.jcna.com/library/tech/tech0015.html

  16. Started by BrentonWright,

    i have refined most of the wiring thoe there is still tones but i still have to much and i have a massive bundle of wires looped through each other on the right side of the wheel i only want the basics to keep the car moving and the rear lights to work however i don't want to cut the wrong ones and spend ages fixing them any help is greatly appreciated.... Refer to the 4th picture the the others that have wires in it.. basicly i want as much of that removed as possible however i don't have a decent diagram to go off and prehaps someone knows what colors are for what? :D ok bought a $500 Rolla... Pulled the seats out Ripped all the lining out took a sledge h…

  17. Started by Burcoty,

    ok basically i'm puttin a 20v in my 82 and need to know if this will work... whats the difference between the 16v and 20v coils? cause this is what i want to do with the coil.. will it work? the reason i want to do this is because the coil lead is different between the two and i'm trying to retain the 16v coil wiring due to the 20v wiring being up shit creek. i know basics like pos goes to pos etc :P but I'm worried about the shiny part underneath the 20v coil... looks like it needs to be earthed but the 16v one didn't? cheers for the help Tyrone

    • 0 replies
    • 2.5k views
  18. Started by Mick E,

    on ke-25 the bloke that had it before me put a start button in car to make it harder to steal. i have taken it out but can't figure out where wires, under bonnet go to go back to key start. all seam to be in right places by wiring diagrahm in manual hope somebody can help cheers mick

    • 2 replies
    • 2.9k views
  19. Started by Burcoty,

    Originally these questions were posed directly to Ae25 cause he's already successfully done the exact same conversion but i figure if anyone else can help aswell that would be good =] ok first couple of questions.. this is the wiring diagram that i'm using to get the 20v loom right (it was spliced into an ae86 and i had to remove that part of the loom to keep just the engine loom), i would like to know what the two things i've circled are? next here is a picture of my igniter loom.. if you look at the wiring diagram it shows only 2 wires going to the igniter yet this one has 5.. i figure that the ones all joined are an earth and the wire with the masking ta…

    • 3 replies
    • 10k views
  20. Started by B.L.Z.BUB,

    Hey guys, I degreased my engine yesterday and afterwards it wouldn't start. So I let it dry out, then ran the battery almost flat trying to start it. Hooked up the Falcon and it cranked over pretty much straight away. Took it for a thrash to charge it up, this has always worked fine. This morning, it didn't want to start again, jumper cables again and away I went. Stopped for 2 minutes to pump up tyres and it almost wouldn't start again. Before I buy a new battery or pull the alternator etc I noticed this loose wire off the back of the alternator. Is this my problem? Thinking I may have dislodged it when degreasing. Cheers gu…

    • 9 replies
    • 4.2k views
  21. Started by jimi91,

    Hey boys and girls I was wondering if anyone has a wiring diagram for a ke35 sr dash???? if so a jap ke3x dash diagram would be nice as well??? see ya jimi

    • 2 replies
    • 2.1k views
  22. Started by yohan18,

    hey guys i started my ke70 up on the way to work and i noticed that the fuse for the gauges had stopped working so i bought some more cause i didnt have any, put it in the correct spot and it worked, anyway the next time i went to go out again it did it again. it seems like it happens everytime i start the car. i have checked the wires and they seem all good but i dunno what it could be. any ideas? oh the dash cluster has a clock, not the tacho. cheers matt

  23. How much would it cost if I were to get someone to re-wire my whole KE70? Might be a stupid question but I'm just curious as to what I'll do when I'm at that stage. Cheers Cody.

    • 12 replies
    • 5.7k views
  24. Started by Alexrx7,

    I'm not getting full power to starter motor (enough to crank over at a normal speed) and my clutch line is mysteriously heating up by itself when we try start it??????????????????????? something shorting out and heating it mayb?

    • 7 replies
    • 2.9k views
  25. Started by ae13b,

    hi i have a ae71 which i have just put a 16v bigport in, just wondering if there is any who can come do my wiring for me ive had no luck i live in melbourne Epping happy to pay... Thanks Steve

    • 0 replies
    • 2.3k views
  26. Started by Lucas_92,

    How do you remove the ignition barrel? Do you have to pull the wires out of the back of it?

  27. Started by t18drifts,

    hay i got a taco and shift light for my t18 yesterday followed the instructions o how to wire it and i thought id try get the power ground and batter from where u wire your stereo to the cars wires had it all conected didnt have the rpm cable connected yet tested to see if i had everything right before this it was it was lighting up ect then when i conected the rpm wire to the bolt thing on the dizzy it all stoped working including stereo all the fuses arnt blown sooo.... i think i just killed it all :bash:

    • 27 replies
    • 34.3k views
  28. Started by jono1986,

    Hey guys, I was having an intermittent misfire with my new dizzy in and now it's alot worse. Pulled it out and found the plastic cover to the ignitor part was loose and after pushing and what not it ran better but I reckon it needs replacing. I don't know what car it came off, I've pm'd the guy I bought it off but thought some people might know where I can get all new bits. Here's a pic of what I'm talking about: Cheers

    • 11 replies
    • 4.8k views
  29. Started by laa_80e,

    hi all, i have a ke16 but it keeps blowing a fuse, the fuse that keeps blowing is the sixth one from the top, if anyone has the cover that tell you what fuse goes were please send me a pic so i stop hacking at my wiring deeper and deeper!! I'm sure a ke10 or 11 or 15 may have the same fuse box cover or and digrams etc please your help will be greatly appreciated, thanks all

    • 7 replies
    • 8.8k views
  30. Started by antman89,

    Hi guys currently doing a manual conversion on my ae71 4ac up to ignition time yet no start I have power just not starting apparently due to safety switch I had 4 wires coming off auto one red on it's own and 3 in a loom two black with white stripe and one green with red stripe I've been told you can by pass this but everything I've been told with no luck, need car on the road asap and this is killing me

    • 3 replies
    • 11.3k views
  31. Started by jaygore,

    I have been searching the forums and have been unable to find the answers to my question I am looking at buying some 12v t10 LED's to make my dash a bit brighter, but is 12v to powerful?? I am unsure of electrics :S Or is there something else that needs to be done to successfully convert to LED's? Sorry if there is already a thread, but I have done a search and tried to find the answers, but there doesnt seem to be a thread on this:S

    • 11 replies
    • 5.4k views
  32. Started by jono1986,

    Hey guys, have done a search on this but haven't found an answer. Bought an electronic dizzy a little while ago with an internal ignitor, coming out of it is a brown and black/white wire. Does anyone know which way they go around, as in which one is positive and which one is signal output? Cheers

    • 8 replies
    • 3k views
  33. Started by MattyZ,

    hey all I'm looking for a new battery for my celica but since it will be located in the boot I'm after a small battery and light but lights not essential. and need some help and suggestions cause ive heard using a smaller, light weight battery they are really only capable of starting the car and small duties. i need one that can be capable of running a stereo (6", 9", one maybe 2 amps, one maybe 2 subs) and a mini fridge only one of those 6can dick smith cheapies. any help and suggestions would be killer.

    • 4 replies
    • 3.2k views
  34. Started by fkj,

    Looking to upgrade the alternator, and run a twin battery set up, second for sound system, what alternators would people recommend, and how would I go about wiring a second battery into it

    • 3 replies
    • 6.6k views
  35. Started by SLW42,

    Hi guys a mate of mine has a late model tj wrangler and it wont start after degresing the engine, we have pulled all the plugs out and blown them out, pulled the earths off almost everything to do with anything, checked all the fuses, relays wires, even belted the solanoid the thing is if you bridge the the signal wire and the power for the starter motor it winds over, any other things to try??????

    • 18 replies
    • 5.2k views
  36. Started by Camerona,

    Hey guys, Ive got a Ke70 1983 Sedan, I recently brought it off my cousin but it had been sitting for about a year and ran a couple of times. Was stored under blue tarpolen outside. I have taken the starter motor out and tested it, Thats fine, When I turn the key over theres no response apart from the battery light. My Horn works and so do my hazard lights on the inside but not on the outside. The things that arn't working are: Headlights Breaklights Indicators Window wipers Interior lights Any help would be greatly appreciated! :) Cheers, Cameron

    • 6 replies
    • 17.3k views
  37. hey guys, I'm thinking there may be someone on this site that is going to be able to give me an answer, cause i can't find anyone elsewere ok so i have my 88 st165 ecu and ive got my car 88 st162, now from looking at whats going on with diagrams and stuff i found out that the gt4 ecu comtrolls low imp injectors that run at about 1.9 ohms, and my car now runs hi imp at about 13.0 ohms, i also have 550cc injectors that are hi imp from an rx7 that run at 13. ohms, now is it possible for hi imp injectors to run on a gt4 ecu without using the resistor pack that is in situe with the gt4 ecu? does this resistor pack make it look like the standar injectors are hi imp, or do t…

    • 3 replies
    • 2.8k views
  38. Started by benno81,

    the alternator on my 4afe 93 rolla went today so i took the one off the other rolla with the 4age in and put that in the problem iam having is the 4afe alternator only has the big positive wire but the plug only has 2 wires where as the 4age has 3 wires in the plug which wires do i join to where ?? thanks in advance benno

    • 3 replies
    • 2.7k views
  39. Started by 4a-boz,

    hey people I'm wanting to change my point ignition to electrnoic, what dizzy can i use? what module do i need? any help will be great

    • 0 replies
    • 1.6k views
  40. Started by Tally,

    Hey guys my indicators on my KE25 Corolla are acting weird. Ill tell you the symptoms and maybe we can diagnose the problem. 1. When headlights on left indicators stays on but don't flash 2. When headlights off and indicating left brake lights flash 2. Dash lights other then the indicator light flashes 3. Right indicators don't work. as well as few other weird things but that's the main stuff flasher unit gone? wiring messed up? the indicators and headlights and taillights all used to work perfectly but after I stripped it and put it back together after paint it was working only for a little while then it all went haywire... Any help greatly…

    • 7 replies
    • 2.7k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.