General Mechanical

Hey guys, I've read around the place that a 4A GZE head will go onto a 7A FE, does this mean that other heads from the 4A series will go on there too? My plans at the moment are: Forged Pistons and Rods (I've seen the rods in these and they are like a gay mans wrist - quite limp) 20V Head. Ecu Port n Polish and other exhaust / induction type things. Balance the crank and maybe a bit of a boring out. and a lift in compression Know any stronger boxes I could use (like sportivo 6 speed or camry V6 5 Speed)? Now, all engine work like cams / heads / balancing can be done for free and all parts at cost price so I can get it done fairly cheap. Basical…

Ok dokie, Just a Quick question to put my mind at easy, I've got a 3k motor here with a blown head, and a rebuilt 4k head also, can i put these two together, aka are these compatable. in order to put together a cheap yet reliable motor, both bottom end and head are in vgc. cheers Chris.

Hi, I'm Bill Buttermore from Ames, IA. I've been working on my own cars since 1966. I recently rescued a '91 Corolla with a 4A FE engine and a 5-spd manual transmission from my local junkyard. The engine was in many pieces, but the rest of the car is in pretty nice shape. I have pulled the engine and trans and want to change out the half shaft seals in the transaxle while I have the tranny out and up. But I can not find any information on what transaxle I have. I have the trans up on my hoist and the only ID I have found on it is a riveted metal tag that displays only the VIN. I searched this site, but found only reference to axle ratios referenced to…

Righty-o, I've had starter motor issues in the Camry for a little bit, am on my 2nd starter motor now and this one has decided it doesn't want to play either. Anyway, decided to take one of them apart and have a look: The first problem is when I turn the key, I hear the solonoid go "click", and the lights dim etc, which tells me that the starter motor is getting power. Except, it doesn't turn. Nothing happens, it just sits there. I can fix this by repeatedly clicking the key on and off, and eventually it'll catch on and start. Second problem is once the car is actually started. It won't disengage the starter motor! It's almost as if it gets stuck …

hey guys, i've come across a 92-93 holden nova sedan for a good price which i am going to pick up later this week. it has a few issues (as it should for the price), which will need to be fixed for RWC. the first thing is the drivers door, which has been rooted after a ute backed into it. i am assuming that the doors should be the same from ae90/92 4door corollas... will they fit? also the 4afe in it is supposedly seized or something. no idea really until i get it home and start fiddling. even if it needs a new engine, i imagine i can pick up a 4afe for not to much $$. the car will never be intended as a ground shaker or anything, just something reliable, comfy an…

Guys, Having this terrible squeaking sound coming from my boot. 1981 Corolla KE70. Think its the bar that holds the boot up. Whenever I drive, small movements of the car will cause it to squeak. My whole journey is filled with squeaking. Anyone encountered this before? Need some help before I break that bar. So what if it doesn't hold the boot up. Help! Just need it to stop squeaking!!! Thanks guys! :y:

A student where I work is an old Rolla fan and has a problem with one of his struts. After cutting his coils one strut has locked solid. There is no give at all. Just wondering if anyone has struck this before because I haven't. Both coils appear to be the same length and the car looks to be sitting level so I can rule out that one coil has been cut to much and the strut has bottomed out. Unless he hasn't installed the bump stop properly I don't know.\ :D

I'm gonna buy or make some new bushes so I have some options: the cheapest option would be to make some new bushes out of nylon or buy some stock rubber bushes from toyota or buy some polyflex shit that is 30% stiffer.. etc.. I'm only upgrades bushes for the rear axle right now, I will take the front later.. I guess the polyflex shit that is really expenssive would be the best option, but how much better would it be than nylon bushes? have anyone tryed making theyr own bushes out of nylon? or something similar? noise, vibration etc wouldn't be a problem, all I want is less wheel hop... I can get nylon bushes for a sixpack of beer, but polyflex would co…

Thought this link was interesting: ToyotaCelicaOnline

Hi all, Does any one know why engine oil would become very thick and stick in clumps in the sump even when warm? its a diesel engine but any help would be good even if it relates to petrol engines..

hey all!! After a month of looking around for a new engine for my Ke30, I finally found one and was successful in changing my old 3k into a new 3k also. now it has a bigport head, TRD exhaust manifold, stock carb. (when I bought the engine it had twin down asians). had to change carbs because fuel here is very expensive. and now its running great!! now for the question, what should be the best gap for the contact point? i have tried the search button and I did not find any good results. OT: grimwolge, I still have the thing that you need, might ship it to you in about a week or two. thanks in advance for the replies.

can anyone tell me how to id a 3k bigport head by the compliance plate

I am putting disc on my 69 corolla i have a article by Alex Bates but the caliper mount/backing plates have a four bolt mounting i got them off a 73 corolla but they don't line up with the ke10 struts do i have to modifiy the bracket from the article it say it a direct fit can any one help Thanks Nardy

hey all just returned from the parts store with all the goodies for an engine rebuild.....not as cheap as id originally thought!!!! i'm havin a fiddle with some bits and pieces and have just realised i have no idea how to remove the spigot bearing(which is siezed coz I'm lazy n left it in the rain)1 i was thinking of just prying it out with a screwdriver but i thought id betta come here n check if thats ok to do....I'm doin it in my backyard so limited resources....HELP! cheers all LUKE

Hi everyone my 84 rolla rear bumper is slighlty damaged and i was wondering can you fix it. If you can't how much would a replacement cost in good condition and can you put other toyota bumpers on the car.

I currently got a se model rolla which i would like to replace with the sx dash that has the tachometer in-built in the dash. Just wondering if the sx dash cluster would be a simple swap over for my standard one. Thanks for any help. PS. Would any one have a spare or would know where i could get one? Daven.

...

Hey, I am about to start a project I have never done before and need some advice. Today I got a KE55 sedan running a 4k with auto.. I had my mates corolla and it a 4k and a 4spd but the motor was very tired!! But I have the motr gear box and pedal set for it!!! Is there anywhere that does tells me how to do convert step by step?? Or would anyone be kind enough to tell me?? or should i be paying a professional to do it?? Thanks Drew

G'day i was wondering if any one can tell me the best timeing for a 3k-c for a Unleaded and horsepower??? (P.S Don't give a shit about economy!!!) Ta Drew

We have yet another problem since putting in the 7k. once the motor seems to have warmed every time you start getting past half throttle its like someones pulled the choke out. Ease up and it runs like shit till it's burnt off the extra fuel. A guy at motor improvments said he had the same problem and just put larger points. Has anyone else come across this before :jamie:

ive got a 4age bluetop converted from fwd to rwd in my ke35. I'm using an ae86 ECU and also an ae86 loom and need to get some fault codes out. how do i go about this? ive been told you can't get fault codes with an ae86 loom...is this true? if not, what do i have to do to get them???!?

hi, I was wondering how far up the temperature gauge the needle should go. I have taken off the original fan and put an electric one on instead because it was running cold. It used to take forever to heat up, so I replaced the thermostat with a tridon brand one which is the same 82C degree's as the original one. Now the needle sits halfway on the temp gauge, even with the fan on. I'm getting the radiator recored and hoping that this helps it to run a bit colder.

For those of you that don't know.....i've had some more headwork done to my 3K bigport...its been off the car for 5 weeks now and we just got it back on tonight.... we've also put on different extractors so they don't match up to my 2 inch exhaust atm, so technically its dumping straight out the extractors....now i have a camera phone that can take video...its pretty shit...but it does the job...and now, heres a treat for you all.. :y: (you'll need divx to open the file, right click and save as) No exhaust

G'Day Peoples, Just wondering what type of spark plugs you guys use and how often you change them? Also.....do you think (say that you prefer NGK spark plugs) that their Iridium spark plugs are any more effecient in a 3K/4K/5K engine than standard spark plugs? Your views please.

Has anyone got some pics of an anti tramp setup on a car? does the bar need to reach all the way forward to the the leaf eye pivot or can it be shorter? i basically am wondering if i can use some spare lower control arms welded to one of those plates that mounts the leaf u-bolts to the shock absorbers as an anti tramp bar on my ke30? make sense? scott.

guys last weekend I was driving along and my car spluttered a few times and started to loose power then just died, I rolled off the side of the road and all I could smell was fuel. Took the air filter off and had a look down the carby, it was almost full to the top with fuel. The car was winding over like it had no compression at all so I just got it towed home till I had more time to look at it. Yesterday I've finally got around to taking a look. First thing I checked was timing belt which is fine. Did a compression test and it came up zero on all 4 cylinders, needle didnt even move. Tested the guage on another car to make sure it was working correctly and then tr…

Can someone please tell me what is wrong with my 4KC, if I put more than half throttle down to try to catch up to traffic or to go faster off the lights I hear a ticking sound or something like that. The noise itself is kind of hard to hear over the diff and the driveshaft but it is there, my dad said he couldn't hear it so don't worry about it, it has me worrying though because I don't want to have to buy a new engine for it yet, I'm not ready to upgrade yet and I need a working car to get to and from work. Someone please help, the ticking noise has me worried about my KE70. Further info, it's a 1981 KE70 Corolla. Stock standard everything, with a 4KC engine.

Hey guys, just two quick questions i hope you can help me with! Firstly can anyone comment from experience what a 4k with a 3k head should run like with a 3k carbie bolted on to it. do they over fuel? fart miss etc? reason for question is after an enigne swap we've found that the 4k is running rough as (think it's mainly thanks to faulty points) but yet overfuels and blows smoke as a result in the higher end of the rev range. yet none at idle or during startup, which one would expect from worn valve seals or rings. What should the expected compression be cylinder to cylinder on the above setup be? roughly 120 psi on a used motor? any help would be…

Hey guys, anyone know what a 4age 16v would cost to do a rebuild on? I would do it myself with help from a mate. The big end bearings have gone and it has been sitting for a long time does anyone know what I would need to replace and what would be best to replace while I have it pulled down? and also what it would cost as a rough price, any info would be great thanks guys :y: =) :wub:

Hey, I am very close fitting a newly worked 5k in my wagon and was wondering is there anything needed when installing the new engine OR something that i must not forget? Also, will i need to rebuild and recurve the distributor to deal with the new engine stats or will it be fine until a later date??? Thanks..... Any comments would be muchly appreciated!

Hey Guys..... I'm deciding between getting a new carb or keeping my 32/36 DGV Weber for my worked 5k...... If i rebuilt the Weber, should i pay someone, or could i do it myself? I priced a rebuild kit at $45.00 at autObarn..... Any suggestions??? Thanks :P

Hey guys. I was wondering if any one can help me. My headlights and high beam stopped working, the parkers still work though. Ive checked fuses wiring and the globes ,all ok. Is there a relay that powers the headlights? I'm guessing there is but i can't locate it. Any help would be appriacited. Thanks fellow Rolla Heads. Dingo.

My KE35's steering is loose in the middle of the steering range when the car is driving straight, what parts should i replace?

well finnaly found somewhere i can get spark plug tube orings, repco, and autopro were unable to get them!! so i tried a toyota genuine parts dealer, coming in from melbourne, not $11.95 as i found on ebay, but $8.95 for the whole set! ;)

i am lookin at purchasing an air/fuel ratio gauge. does anyone know the accuracy of these gauges. is it a worthwhile thing to have? ;)

does anyone know a place that will recalibrate a mechanical speedometer? i'm wanting to go from 195/82/14 to 235/45/17 or 235/40/18 on my hilux, but i don't want the speedo to be out

hi I own a 1984 Ke70 sedan. It drives perfectly for long distances untill you turn off the engine, then the car refuses to restart and when it does it constantly stalls and has zero acceleration. Even if you let the car sit still for a few hours it still doesn't work. However if you let the car "rest" overnight it is magically fixed and runs fine again untill u stop again. Noone has any idea what is wrong with it, the only thing i haven't done is try an exorcism. Can anyone help?

hi i was just wondering what would be a good brake upgrade for a ke30 ? with a 4ag 20v silvertop!!

How do you tell if a fuel pump is on it's way out? I've got 2 fuel pumps in my car, one is a facet to fill the surge tank, that's noisy and always has been, no problems there. The other is apparently out of a VL, and has always had a bit of a whirr to it, but I'm now noticing it a lot more, it's gotten a lot more noisy. The car still seems to drive okay, it revs alright and all that, doesn't appear to be leaning out. Is the noise an indication that the fuel pump is on it's way out? Also, looking through eBay (yay for eBay), there are so many fuel pumps listed up "to suit VL", but they're all different part numbers? They all look the same, is there a certain one th…

Hi. Anyone know about the 4 and 5K-J engines and what box they bolt up to? Never heard of them myself and the only reference I can find is that they were used in the KE70. Thanks.