Rollaclub Rides

Hey guys, I am new here, have recently bought this 1972 Corona RT81. Straight with minimal rust, looking to do some mods such as suspension, brake upgrade (to disks), 4agze and so on. First thing I noticed when I bought it was the clutch pedal went to the floor, had to pump it a few time to get it to work. Dale

hey guys and gals, thought i would introduce my car to the forum.. some specs: engine: it did have a 4age in it. it has a 4agze now that i've almost finished converting. just a few wiring gremlins but other than that its basically done. it did have a rebuilt motor as i spun number 1 big end. luckily for me it wasn't damaged too bad so i got it all machined up, head rebuilt etc. unfortunately i used an ACL head gasket and not even 10 000km's later it split. so i ordered me a genuine head gasket and some ARP head studs.then about 9 months later i got bored of the bigport and decided to get an ae101 halfcut. gearbox: e58 LSD with Exedy heavy duty clutch. mac…

hey all just got myself a ke70 4k 5speed for 500 bucks with 10 days rego. its in ok condition standerd as old man owned it. going to slowly fix it up over time not sure what mods I'm going to do yet but for now I'm going to lower it n find a set of ssr reveres mesh wheels to fit on it :y:

howdy folks, this may not be everyones glass of beer with the plans to come but i'm pretty chuffed that i finally have another one and after scouring the car sales and places like that for some time now i actually found this one sitting in a backyard around the corner and about 1km down the road. have seen it sit there for nearly 2 years now not doing a thing so i thought i'd knock on the door and hit em up for it, an hour later it was sitting in my backyard begging to be loved. but anyway, enough of the fairytale stories. it's a 1980 Toyota Corolla, little neglected as most of them are but reasonably straight, some rust in the usual places, the kids of the lady i bou…

Name: Daniel Taylor Model: 1973 Toyota Corolla Ke20. Colour: Willow green. Engine Type: 3T-c 1800cc Engine Mods: Stock engine. Power: 46RWKW's Exhaust: Extractors,2 inch pipein, turbo mufler. Gearbox: T50, 5-speed. Diff: stock, small, LOCKED, noisy. Brakes: small and stock. Suspension: 2inch blocks in da back, choped up front. Wheels/Tyres: 12 or 13inch, many mags, depends. Interior: Mazda 929 front seats, blue door cards, all the rest stock. Other Mods: Taco Stereo: All pioneer, 4''s in front dorrs and 6X9's in shelf. Build Period: will never end. Future Mods: to many. ill get some more pic, at some point.

Had a friend asking me about getting him a 4k for his ke70, I instead made an offer on the car and viola' I now own a rwd Rolla :) Its currently an auto with a 4k-c which overheated due to being leant to an overseas visitor (bloody victorians :P) and was driven with a leaky top radiator hose, got a wee bit hot and developed a big end noise :( My friend then thought it was a good idea to hold it in low gear until the bottom end exited the sump.... Cloth interior is in really good nick, 140'000 on the clock and only a tiny bit of surface rust on the rh corner under the tail light and the front bumper has been caught on something on the rh side whilst revers…

Bought this on Sunday a 1969 ke10, 3k four speed and NO RUST has a few dents, but it is complete even owners manual and original keys. Has a saas wheel but the original is in the boot. New exhaust, new shocks all round, red interior has a tear in the drivers seat but the passenger and rear seat is spot on. Has 30+ year old 155 remington steels on it lol Engine purrs with a pull of the choke and a flick of the key B) Plans are new tyres with widened steelies or ssr's and paint and panel back too a light cream colour. I put rego on it Monday and have been driving it to work the last few days

its a 82 CS with minor mods shaved 4AC 2.5'' exhaust pod filter TX3 retrim TX3 rims dropped on kings super lows my sterio consists of 4'' shattas pioneer 6x9'' and a big box for 2 12'' future plans get rid of current sterio and get JBL GTO series all throu JBL GTO 4'' JBL GTO 6x9'' JBL GTO 12'' JBL GTO 2 channel amp A headunit that plays MP3 USB IPOD ready SD card slot HDD to store all music and of course 4agze for a while then convert to a 4agte maybe a 20v silver top *drool*

Delete thread

wow been ages sence i posted on RC. sence then ive moved from QLD to NT. i just bought aAE95R (people from boost will know it as NT1200's old car) still needs the paint on roof attended too when funds permit, and the box rebuilt to fix the syncros, and maybe one day get the exhaust and intake opened up a lil it was a bog stock ae95r sr5 till last weekend, now has DVD head unit, filled all speaker holes with 4" speakers again(wasnt in the mood to chop up a great clean interior), 6000K HIDs, 10% TINT :lol:, two way radio and small aerial, pacemaker extractors. also got all its normal service gear and glad i did, found MUD in the fuel filter :), soon and as tim…

Name: Danel Model: 74 rolla ke26 wagon Colour: White Engine Type: EB ford falcon straight 6 Engine Mods: non at dis stage Power: ? soon to be alot Exhaust: non at dis stage Gearbox: T5 5 speed Diff: R31 skyline diff Brakes: Yet to deside Suspension: Stock at the moment Wheels/Tyres: Stoocko at dis stage Interior: All stocko Other Mods: non Build Period: The whole year till summernats Cost: nothing for a bit. Future Mods: turbo the motor, run at lest 250RWKW, heaps really will change through the year so no point listing them all. well as i could only seem to have some peps lookin at buying the 5 speed …

G'day all.. Bought an EA Falcon off a forum member for a bargain price last week, took delivery of it on Friday night.. its my boonger and I love it ;). As it sits, it runs the 3.9L powerhouse (!), three speed auto (should have put oil in it for the trip home) and an unknown ratio diff. Its 'chardonnay' in colour, complete with faded paint! Interiors great except for a few little bits and pieces, which I'll replace sooner rather than later.. Plans I plan on tidying up the interior by getting another centre console (this ones rooted, chronic plastic cancer), seat covers and floor mats. Already has a good sound system (4x45w Sanyo CD, 6" Sony splits and old school AK…

Engine: Stock 4k now running sweet - Soon to be 4age Exhaust: Stock - Will also be upgraded as soon as the 4age is in Suspension: Kings Lows For now (put them in the other day cause it was way too high) not sure what i will be upgrading to , Have sigma arms for after roadworthy Wheels: Standard 13" - On the lookout for a pair of 14x8 meshies and 14x7-8 centrelines or similar Modifications: Really only the springs at this stage as i have to get it past roadworthy in the next few weeks Stereo Audio / Visual: Put a pioneer headunit and fusion speakers in as the standard fm wasnt cutting it not a huge fan of audio equipment (drove my ke55 round for a…

Righto, i plan to keep everyone updated on the build of the beast. Will post pics soon... Plan The KE55 coupe will be stripped out speedway style (just a ignition circuit remaining), will run 3k with 5 spd (4th and 5th grs removed). Painted flat black. Rollcage, relocated battery and radiator (into 'cockpit'). *more pics added of new car*

Picked her up last monday, I'm quite happy with her, its a massive upgrade from the EA and she is clean as... picked her up for a score too! When I got her; Had to get rid of those 'poofter stripes' down the rear quarters; It looks a bit more tough now... But the stock stereo was absolute shit... so I decided to whack in some of the components I had lying around into the subi. Namely a Sony CDX-R5210 and a 12" Alpine Type S sub... and an amp to power it (old school ALTEC 2ch amp... 160w bridged - its only temporary) The Alpine will be going, either in place of two Pioneer 306c's or a Boston G2 powered by a Alpine V12 monoblock or Jaycar 800w @ 2…

So whilst technically this is the wife's car, I'm the one burdened with modifications, taking photos, and posting of pictures/stories in the appropriate forums. Introducing Daphne. Yes, we like to name all our cars. However, the first name my wife chose (Artoo, since she loves R2D2 and the blue is perfect) didn't quite gel when we decided after the first few days of ownership that HE was actually a SHE. So far, Daphne has come out as the likeliest alternative, but we're still not 100% sold on the name so it may change again the future. Anyhoo, Daffers is a 2018 Toyota Corolla Ascent Sport in Blue Gem metallic. She is kitted out as standard with 16"…

Hey people, Three weeks ago a bloke at my work liked my red ke70 and told me him and his wife owned one, etc and gave it to their daughter two years ago cause they didn't want it anymore so asked about it and he said they still had. I didn't know what to expect cause he said it was badly rusted, ball joints were worn, etc etc. So I went to the address and I was shock on how original it was. They told me everything about the car and what had been done to it and that they wanted to get rid of it cause it was costing them money, the funny thing was when I was viewing they said if I didn't buy it they were going to take it to sims. So I offered them $250 for it and they a…

"Betty":1973 Datsun 1200 B110 Coupe, runs a std(ex120y) A12 motor with extractors, std 4spd man trans, H150 3.7:1 diff on 13x5.5 Enkei Limited Comp Sport rims. 165/75r13 Front, 185/70r13 Rear. New motor(ex original) currently being rebuilt to A12GX spec. One owner car all matching numbers on original plates. (My wife hates it!)

Hello boys and girls, So about a month ago (Late January!) I picked up two KE70s for a bargain 700 bucks! Unbelieveable! One auto, which I simply spent minimal change and cleaned up and use as a run around, the second: A 5 speed manual, blue, and might I add rare "XX" model which includes a boot and petrol flap release catch under the drivers seat, a taco dash, and velour interior! Wow how modern haha! I was stoaked. It had done under 180,000 and has been sitting since 2007. I later found out it CAN be registered! Woo! However, no where near roadworthy. So I've sunk my teeth into it and plan to focus purely on cosmetics and not bother with molestoring the runn…

Name: David Model: 1992 Toyota Corolla CSi Colour: Red Bodykit: None Engine Type: Twin Cam 1.6 fuel injected Engine Mods: None as yet Power: Stock Exhaust: Standard Gearbox: Standard 5 speed manual Diff: Standard Brakes: Standard Suspension: Standard Wheels/Tyres: SX Wheels Interior: Standard Other Mods: None Stereo: Pioneer Headunit & Pioneer rear splits Build Period: Just started! Cost: No cost as yet Contacts: Future Mods: Lower it, tinted windows & exhaust

hey guys I'm new on this forum so i thought i'd introduce you all to my money pit (car!) that i cruise around in...!

Hi, My name is Dave and this is basically my first post on Rollaclub, This is my new KE30 :cool: , I've been after this exact one for a while actually, when I found Towe was selling it I really wanted to buy it but before I could come up with funds NerfBat had already taken ownership, NerfBat had to move it on so I am now able to finally call this awesome little car my own. For the money I paid its one hell of a car, kudos to Nerfbat,Towes and who ever else has owned this car at one point or another beause its a neat little thing. 5K motor Mod Plate for 5K Extractors 2 inch exhaust system ke70 5 speed box 4K lightened flywheel Mix of Clutch Industries…

Thought I'd chuck up some photos of my daily, looking for a 18RG twin cam to help her out a little but higher in the rev range. 1975 Toyota Corona RT104 3speed auto 18RC engine nothing special.

(Pictures not owned/taken by me) Well, I've been through a couple Corollas in the last 6months, A Ke30,Ke36 and a Ke10. Finally got what I wanted, and I plan to keep this one for a while, (Unless I can get a Sprinter in as good as condition or a TA22/RA23 Celica :harhar: ) Currently using it as A daily, but next month I can get my RE bike licence or import a Nissan Cube and it will then be under a locked garage and getting things done quicker... Don't want to do too much, as it runs beatifully how it is now, just get it back to how it was 40years ago. - Fix hood lining - Fix rest of rust (most has been done) - Rims (at this point Ill keep it…

So..... Zowie and I did another trade, and I got this thing. Ae82 20v blacktop conversion rear disc conversion and that's about it for now. Future plans? who knows, I quite like it so I wouldn't mind pumping a bit of money into it, fixing the suspension up (Probably Bazda gear) and maybe some engine work (I guess best value for money would just be a turbo) Hope to run it on a Dyno this week, maybe look into going aftermarket computer, and hopefully if I have time ill try and get out to Wednesday Test N Tune at Willowbank to see how slow it is. Crap pictures but all I got at the moment.

back in march last year i bought a ke35 coupe with a 4age in it. it had been sitting in a shed for the last two years. when i got it the master cylinder had ceased and only the rear brakes were working. made it a very interesting drive home. here are some of the specs on it when i got it Yellow 77 ke35 coupe (last of the 35's so it has a ke55 dash in it) AE86 rwd bigport 4age with t50 haltec e6m computer RA40 front struts with the crossmember dodgy drilled out for more camber. 14X6 super lights

Specs: 1.3 4k 4 speed manual Aircon-not for long. fulysic am-fm tape player My new project. Ke70 panelvan. Picked it up off some kid that had blown the clutch in his paddok for $50. although the car is not rusty. it had many dents. i have started to panelbeat most of them. still getting onto the rest. i have another clutch for it. havent bothered to put it in yet. still need a starter motor. The main problem that i have atm is the passenger door. The seam has split off the door and it is falling apart. i will either need to find another one or just weld it up. I don't plan to have this thing completly straight and clean. its my p plateers car. nothing special. …

Picked another ke70 panel van up a little while back. Much better than my other one. Specs: 4k. 4 speed. few extra little bits here and there. No rust at all! Windowless! Slowly getting it ready. Got screwed around something chronic when i bought it. its still defected. but i'm getting it off in the next couple weeks. don't have many photos of it. just ones from when i first got it. Looks much better now. Anyway, enjoy some photos. Dave.

since i got daves old 70 it had a blown motor bad paint dings rust etc... the guy who dave sold it to didnt take care of it at all.. so this is my build thread : :) 4age silvertop 20v the rebuild is as follows (hopefully i included everything) : toda over sized high compression forged pistions C/R 12:5:1 H beam forged condrods ARP head studs ARP crank studs Kelford 194-C racing cams Toda racing adj. cam gears Full head reco port and polish Supertech 1mm over size valves Supertech racing vavle springs Tomei crank caps TRD 0.8mm multi layer metal head gasket TODA timeing belt 1zze Coilpacks ALL ENGINE PARTS BALANCED ITB'S (trumpets) + all RWD conver…

This is my fourth rolla and hopefully not the last but instead of using it for khanacross(which i use all the others for) this one is going to be road registered so I can use it when I get my L's (in 2 yrs) The car cost me $150 it is not licenced at the moment (It was but the people kept the plates :hmm: ). the interior is imaculate :lol: no cracks in the dash, and it has not faded. The body is in very good condition on the drivers side but needs a new rear panel on the passengers side. Under the hood it has a stock 4K-C Hi-Cam motor which has a Blown head gasket. The only bad rust it has is around the top of the boot which is only about the size of a 50c coin but it…

Another video of my ke70

Hey everyone, I'm the newest member on this forum....looks to be a rad place! i been driving around i na ke55 corolla for about 4 months since i sold my old EB II V8 fairmont ghia. I was pretty cut i had to let that car go and i picked up my corolla for 500 and really resented driving it. But tonight after i got back from work i decided it would look really wicked if put some effort into it and did it up. What id really like to do first is tint my windows and get a set of mags, then later on i want to get the rust cut out ( not really that much) and repainted...and finally not sure when i would get this part done but i want to stick either a CA18DET into it o…

Hay boys and girs I'm new to this club and have a difficult question to ask of you. what colour and style should i go with on me beautifull ke55. keep in mind that its a 4-door and has ke30 door skins, the ones that leave the top of the door exposed to match the colour of the body. don't lough but when i first got it i did it in tool box bluefor $43.50. i thought it was a bargen at the time but didnt think it would be so hard to strip in the end but its all good now the car was taken back to bear steel, dents were filled, the war on rust was victorious and all panels were made flush. only took me and my mate Gilly, Oh about 5 months :dance:. So what are your opi…

Just bought a overrated as Ke26, all original except for Ke55 5spd and mazda 13's. As soon as its in my name (any day now) i'll put a set of crown hubcaps and whitewalls, a visor and then dump it.

mods AS IT WILL SIT FINISHED IN ABOUT 6 weeks T18 S2 Struts T18 RDA Slotted Rotors T18 Brake Caliper QFM HPX Pads Section cambertops ST184 kyb excel g front inserts AJPS 6kg Springs AE86 LCA's (20mm longer) Nigel Petrie Heyman Steering Knuckles Mark Rogers Modified Rack Ends AJPS Lock Spacer AJPS Tie Rods/End 20mm RCA AE86 Steering Rack Super Pro Bushes - LCA, Steering Rack, Swaybar Links, Castor Arm Kelway Strut Brace Whiteline Swaybar VL KYB excel g's shocks Whiteline panhard rod Whiteline Swaybar Super Pro Bushes - Swaybar Links/Trailing Arms T18 Series 2 T Series Diff ST141 Corona Disk Brakes QFM HPX Pads Protex Slotted Rotors AJPS trac…

so bought this today on E-PAY.. plans. fix rust and any other problems REGO RA 65 front or ma61 front end 15 x9.5/15 x 10 work Ewings which i already have sitting here 4 inches lower hand flared front guards respray 1jzgte (already organised) drop the top n CRUISE

Delete

Hey Hey, Got this ae71 off Trevor. Is a manual but no box or engine. Came with 2 spirit wings and one is sold all ready. I have 2 tacho dash's now aswell. Picked up a bare 4age for it in need of a rebuild so that will be started when i can be f@$ked. Ha so very true. 7 rib 4age bigport. The plan is: Stripped interior W55 Carbed 4ag Maybe some head work but i will decide that in the rebuild W to 4a bell housing. Open borgy will be kept for a while, Might get a ra40 diff or something. I want coilovers but meh, Probably will end up with 86 struts or ra60 struts. NOT a drifter, Circuit car which means it has to handle not just be lo…

Hey Hey, Well i finally got my Ke10 home today. 1st things 1st, RUST has a bit but luckily my uncle is Welder by trade and has a MIG and TIG setup at his joint so it doesn't worry me to much. No chassis rust just panels and front sills. No rust around the fuel filler which is good. Some parts are missing but most of the main parts are there. Des :bash:

Hi. I was given this car to me buy my old man as he is looking for a falcon ute now. I know its not a Toyota but i like this website alot more than others so its going up here. Specs: 1986 NC Mitsubishi Pajero short wheel base model. 2.6 astron engine and 5 speed Auto front hubs. Aluminum checker plate side steps Aluminum 2 poster bull bar with 100w spot lights. Brand new complete rear diff 20,000km ago with LSD. New front cv's a few weeks ago. Just replaced timing case seals and gave it a service. Fitted 235/75/15 tires too 15x7 steel wheels. I wanted 265/75/15 on 15x8's but they scrub when on full lock. Just converted it to H4 globes instead of sea…