Rollaclub Rides
Got a ride you want to show off? This is the place to post them.
2852 topics in this forum
-
So after my Skyline getting defected and it's slow transformation into something I'd want to drive ended. I decided I needed some new wheels. So, I went to look at a few BA's around the 8k mark and they were all pigs and the AU is butt ugly. I've always had a soft spot for the EF/EL's especially the XR. And when this came up at a caryard just down the road I almost creamed my pants. It's a EF Fairmont kitted up like a XR with all the XR goodies. With my first chance on the monday morning I took the car for a drive, had my bank loan approved within a couple of days and picked it up on the friday night. Since then it hasn't been all smooth sailing. My fuel pump re…
-
- 0 replies
- 1.4k views
-
-
hey everyone just thought i mite put some pics up off my ke70 and see what people think just doing it up slowly will be rego soon just need money for my 18th so be rego after that tell me what you think and feel free to lend me some ideas for it thanks corolla ke70 84 stock 4k engine i have got two dragways on the front and hot wires on the back
-
- 0 replies
- 2k views
-
-
Hey, thought i'd upload some pics of a project that i've started. I bought the car from a mate for $400 and it didn't start when i first went to pick it up cause of a dodgey starter motor, they got it rebuilt and started first turn of the key. Had some exhaust noise and economy wasn't that great, so about 30 bucks later it was running sweet. During the whole time though it had an oil leak or leaks, so i thought i'd pull it apart and do a gasket and seal change, and also do a auto to manual conversion. Picture shows some damage to the door, the previous owner's daughter left the door open and it rolled into a tree :) , but 1 hour and a block n tackle all fixed :…
-
- 60 replies
- 109.4k views
-
-
CAR: 1984 ke70 corolla ENGINE: stock as a rock 4k 219,xxxs runs superbly TRANS: 5 spd manual DIFF: stock borgy SUSPENSION AND BRAKES: stock rooted rear shocks, stock brakes BODY: very good condition, little rust I bought her for 1500 a little over two months ago and she hasnt let me down yet!! engine runs like new and trans is excellent. has a bit of bog here and there, new alternater,water pump, thermostat, thermostat housing, radiator, exhaust, and tyres were new but for some reason the back ones are wearing out really fast. interior is stock blue and in very good condition. taking a bit longer to do up because of school and work and don't get mu…
-
- 15 replies
- 9.8k views
-
-
- Fully Rebuilt 7kc - Shortened holden LSD diff 3.89 Gears - Garret Turbo - Bigport head with hardened springs and lifters - Custom sump with high flow oil pick up+oil cooler - 45mm side draft weber 32/36 jets - High flow electric fuel pump - Electric dizzy - Lightened flywheel with heavy duty clutch - 3inch mandril bent exhaust coming straight out the back of the turbo-no mufflers - Over sized Girlock brakes-drum rear - Heavy duty sway bar - Nolethane rubbers are new all the way t…
-
Heyyz! 1993 toyota COROLLA seca RV i had a post up b4 when i bought this and got some ideas and fixed it up a lil give us some feed back on what else to do, i was thnkn of a JDM style kit. lets see how that goes
-
- 8 replies
- 10.9k views
-
-
Hello folks, this is my 2004 Toyota Corolla Fielder. Some Stats: Transmission: Automatic ( P, R, N, D, 2, L) Engine Displacement: 1498CC (1.5L) Engine Type: VVTi(Variable Valve Timing With Intelligence) Engine Model: 1NZ-FE Here's a list of things that I modified after I bought the car... 1. HID Headlights (High Beam 8000K, Low Beam 8000k and Fog 6000K) 2. Custom Gauges( A Vaccum Meter and a Battery Meter) 3. NGK Iridium Spark Plugs 4. New Eyelid 5. Hydraulic Horn 6. JBL 640WATTS Amplifier 7. Pioneer 15" Subwoofer 8. Kenwood CD/DVD/AUX/MP3/WMA Player 9. 215/40 Yokohama Tyres 10. JRD Custom…
-
- 0 replies
- 2k views
-
-
well ill start off with the 4k power house lol bought it after selling my ke30, just done very basics... falcon springs, locker, stereo and ma61's needs a little bit of work like a new passanger front gaurd but thats about it think its done 95,000 k's now and remember kids always make sure your wheel nuts are done up nice and tight lol now for the cake basically just bought it for something to thrash at track days and burnout comps ect just been fixing up some little things that needed to be done. just a stock ca18det with 3 inch exhaust, screamer pipe and a front mount and some fancy tune made 155rwkw on 6psi Name…
-
- 7 replies
- 3.2k views
-
-
Here's my 1973 ke20 after not owning a car for a few years i wanted to get another i was looking for a wagon but wasn't having any luck but got offered this for $400 thru a friend. Its pretty much standard except for 13inch mazda 323 rims and a 4k and k50 So far i have just cleaned it up a bit and got it running better my plans are get to get it painted the original colour and tidy enough for rego in SA then start some mods to suspension and some 14x7 wheels then later some engine mods. how i bought it After a clean And after i painted under the guards,rims and headlight,grille,tail light surounds and got rid of the commo indicators Does anyone know th…
-
-
- 200 replies
- 249.8k views
-
-
Car: 84 KE70 Motor & Driveline: 4k 5spd, extractors and exhaust system, stock diff Suspension & Brakes: Stock Wheels & Tyres: 13x7s wrapped in cheap 185/70 tyres until i get around to flaring the gaurds Interior: Head unit, 6" up front and 6x9s in custom parcel shelf, seat covers, blue/sliver steering wheel Body: Stock, working on rust repairs Other: Tinted windows, passenger side mirror, shiney exhaust tip :) I bought this ke70 about two months ago with 170ks on it, it was pretty much standard apart from tinted windows, aftermarket steering wheel, crap warped extractors and an exhaust system. So far ive got new extractors put…
-
- 10 replies
- 3k views
-
-
Hi all. I've been roaming around on this forum for quite a while now. I thought it's time to post seeing as there's quite a few AE112s about and I have a soft spot for KEs too :). I've just copied and pasted my ride from TOCAU below as then it's easier to update later for those interested :yes: Well I picked this Corolla up with 85,860Ks on the clock for 11k. Cleanest interior and seats that have hardly been sat on (minus driver's seat LOL)! I chose the sedan because it is different and handles better than the liftback in my opinion. I was also influenced by this Hong Kong AE110 Sedan. Just bought from the car yard... Then modding stopped for long while... …
-
- 4 replies
- 8.3k views
-
-
Hey guys, this is my rolla TE72 / T-18 I was given this car. Took me a while to realize it had potential. This is how it was when i got it: Then we chopped the springs, painted the stock rims black and found some wheel trims, haha: Whacked some jelly beans on it, And now brings me to this stage. Just had all the rust cut out of my car and professionally primed. Ready for me and a friend to paint it in 2 Pack White. Painted in a fresh white today, needs a buff still, but came up pretty good considering the conditions of work and the area surrounding. also the people painting, props to my mate mick for doing m…
-
- 4 replies
- 2.6k views
-
-
So, The story goes along the lines of this. One day, a little old woman decided to get her usual 6 monthly service on her car. The added note on the repair order was that it would idol a little rough at the lights. Considering the car would travel 1 return trip a week from home to the golf course on a thursday mid-morning, every week since 91, she must have been pretty switched on to pickup on it! If thats not good enough, try the fact that she was in her early 80's & the genuine rims don't have one cm of gutter rash. Turns out like most cars with a 7M these days, a simple service is oil, filter, head gasket. This one was no exception. haha. Long story…
-
- 45 replies
- 13.3k views
-
-
So my memory was jogged after seeing Teddy's new supra, that i have always wanted to own a MA70/71. I've always loved the shape and the stance of them on the road, plus the fact you don't see many of them anymore. I started looking around for one, and promptly found a few interstate, but wasnt really interested in plane fares and costs involved of buying an interstate car. So i kept looking and eventually stumbled across one for sale on the side of a major rd in brisbane not far from where i live. I stewed on it for a couple of weeks before asking my brother what he thought of the car i was thinking about putting a deposit on. It was a Red 1989 MA70 7M Auto Single tu…
-
- 26 replies
- 32.2k views
-
-
hey guys and girls this is my 83 rolla flat nose . 5 speed man . 4k . lowed sprins . i have a fixed bucket and cage to go in to it . all sound matting is coming out this weekend . its got 14 inch rims with some dish . i had to lift the car for roady . but it will be tucking soon
-
- 0 replies
- 1.4k views
-
-
ay guys, thought id post up a thread of my first car, 81 ke70 :S. very clean, currently pretty stock, 13'' centrelines, reasonably slammed this thing is pretty overrated, LMAO at the condition of the interior. would luv for u guys 2 let me know what i should do to this beast, thinking bout front lip, not sure about 4age at this stage.
-
- 14 replies
- 3.5k views
-
-
Collected my latest machine from twentyeight today... given its brown and my girlfriend thinks it looks like crap, we have christened him Mr Hanky! I was only half intending to buy it to be honest.. thought it would be a good buy under $1000 and put a bid in on ebay at $950... watched it creep right up to that number and thought oh well, its not meant to be... but the other bidder stopped at $948 and it ended up mine! Here I was thinking I was just helping Simon pay for the Crown by helping the bidding price up hehehe Not sure what I am going to do with it yet.. clean it up..rego it... put some decent lowered springs in it rather than the bodgy cut ones it has in …
-
- 70 replies
- 73.7k views
-
-
hey guys, picked up this ke70 wagon last friday. it's my first car, exterior is fairly clean, interior is shocking haha. pulled most of it out today and it's getting a good soak to (hopefully) get the stains out. if that doesn't work too well, i'll get it reupholstered, any suggestions where? here's a picture for the meantime. got a few bits and pieces to sort out, has a vacuum leak and won't idle. other than that, need some rear seatbelts if anyone's got any :) short term plans - fix any mechanical problems. interior done nicely. decent stereo (doesn't have one at all haha). upgrade suspension/handling/stopping (i read ae86 front coilove…
-
- 30 replies
- 15.6k views
-
-
Hello everybody! My name is Jyrki and I'm from Finland. I have corolla ke70 DX. The engine is 4K and the gearbox i have change fice gear K50 gearbox. Suspension is front Ford sierra front spring( i have shorten two and half round the spring), shock absorber are e9 corolla. Absorder assy i had shortened 40 millimeters. So front side are 80-90millimeters lower than original. Rear spring are little bit shortened. Front indicator lights are from BMW e30. Front spoiler are golf mk1. I changed the front seat corolla ae86 gt seat. Steering wheel is luisi. Last winter corolla has little bit accident. An old lady drove on me. Then broke bonnet, bumber, right headlight and fend…
-
- 19 replies
- 11.5k views
-
-
hey all, i know its not a rolla, but its a toyota lol I picked it up from jasonke30, for a nice price of 950bucks, its needs some work but a good base for a project Engine: 2.4 diesel powerhouse lol Trans: 5speeder Diff:its got 2 lol suspension: stock for the moment, but soon to have 4in raise, and 2in body lift with 33in tyres Paint: nice faded red with optional dents lol Body Mods: dents n a lil rust lol Interior: stock and a lil tatty lol how i bought it how she sits now, slowly getn there lets me know ur thoughts
-
- 7 replies
- 2.9k views
-
-
some temporary panel/paint work to stop it rusting away .. motor - 12a bridgeport, nikki 4 barrel, electronic dizzy leads - 9 mil eagle leads oil cooler- rx2 oil cooler scatter sheild rad fan s1 radiator rad hoses belt, temp sendor adapter ect coils - bosch gt40 new dipstick from mazda driveshaft loop engine rubbers - solid mount style engine mounts - made by kiwi re crossmember and gearbox crossmember 4 Puk clutch kit engine loom - made by me motor and s2 rx7 box ready for ins brakes - s4 rx7 hubs new braided lines and pajero master to suit new brakes ke30 handbrake and s2 rx7 shifter…
-
- 10 replies
- 14.5k views
-
-
Hey all, New to the forum so firstly would like to say hi :wink: I just bought myself a KE70 slope front corolla for $400, runs great and has the 4 speed manual, has a 1.3 engine with ''hi cam'' badges on it :wink: Its got its fare share of rust, in behind the rear bumper and in the rear wheel arches, luckily i have half an idea on what I'm doing so i have made this little thing my project car. The car itself has every reciept spent on it from day one and has been a local car from brand new, and the car has only done 153,xxx kilometres!!! The interior is okay for an old car, no cracks in the dash or anything so thats a plus. So anyways, my futur…
-
- 3 replies
- 3k views
-
-
So i Bought the Ksev about February of 2009, dirty old 4k, standard, Got some wheels, a new exhaust, gktech wheel, and basically havent done much else to it, Finally decided its time to attack it and get it looking somewhat better than it was, so i started by finding what rust i had and figured why not get into it and sand it back to give it a new colour. decided i wanted to do an engine conversion, found a cheap CA18det engine package and have started the process of long hours of sanding, welding, bogging, more sanding, fab work, and such.. Havent got a deadline as of yet, so atm i do some work, forget about it, do some more, and so on...
-
- 15 replies
- 9.5k views
-
-
Hi everyone this is my corolla story, i bought the car a little ova a year and half ago for $200 with the intention to do a hilux motor swap. Soon realizing that if i was going to change the engine i may aswel make it worth it hahaha. It sat in my parents garage for the best part of 6 months while i decided what to do with it, in that time i prepared the car for painting and striped it, i purchased a half cut from the local jap shop and mum and dad arrived home from work one day to find half a car being craned of a flatbed into their driveway taking up more space. With the threat of being kicked out i had to send the car of to get motor in. Its now back at my place to get…
-
- 17 replies
- 17.9k views
-
-
-
Ive always wanted an ae86 and after crashing my 71 I decided to buy a shell and chuck all my gear into it. So last week I picked up a non rolling shell (which is actually not hard to transport). It has a bit of rust and is only half painted. lol. But i plan on cutting out the rust whilst it in in shell form so I wont have to do it again. Anyway here's some info and plans! Its a 83 ADM sprinter, has a modplate LA1option3. Ill be chucking in a JDM 4age bigport, T50, Jasma stainless extractors, 2.25 mandral bent exhaust system, and hopefully a T series Diff (if i can find one for a good price), front and rear strut braces. For suspension I have some 8kg front…
-
- 13 replies
- 4.8k views
-
-
hey the name is Scott. I'm new to this forum and this is my first corolla i picked up yesterday... she is a beast!!! hope you enjoy more pics to come
-
- 9 replies
- 2.8k views
-
-
Just thought I would intro the Family. The youngest 2008 Aurion Sportivo SX6 The 80mod T18 you've meet, getting ready for paint this week and then for sale. The newest addition 79mod KE38 Wagon one owner deceased estate. 97000 klms all service books upto date. $1200. This little KE 38 is a ripper should be registered by Friday. Nothing to do to it. Even the original radio and tape deck still work fine. A wash and polish wouldn't go a stray though. The collection is growing! Loosing the roo bar!
-
- 5 replies
- 2.6k views
-
-
G'day everyone, I not so long ago bought a Ke18 2 door windowless panelvan from a member on here, so I thought I'd start a small project thread. :bash: So far I have swapped the silver wheels for a set black ones from a mazda 626 which I had on a ke20 parts car in the backyard * Replaced the pitman arm with a new one which I managed to get from Pabs. * Pulled out the original NOISY banjo diff and put in a complete borgwarner diff out of a ke11 parts car which I also have. ( I can hear what my passenger is saying now) :D * Repainted the inside back part matt black again to freshen it up. * Moved tacho from under dash to the top of steering column. * …
-
- 46 replies
- 22.5k views
-
-
Hi all I'm very new to this site and posted this on another forum and thought it would be good to show it on here, i have wanted a KE70 for a long time as a project on the side/track car, i could never find one cheap enough to consider buying as i had my main car taking all my money every week its a Ford BA Fairmont that I'm turbo charging over christmas. Anyways back to my KE. i searched and searched for weeks in the papers, Internet carsales, forums and picked up a Defected KE of the forums for a miserly $250 it needs some work and some love but a low price like that i couldn't let it go. So tow trucked it back to my place where i will try to get it back in RWC and …
-
- 2 replies
- 3.9k views
-
-
Howdy All, Been on the forums for a while but never actually did a rides thread i don't think :D This is my first corolla, ive also owned another AE95R (parts) and a AE71 as a work car, till i killed it :dance: I bought this off of these forums back in July 2008; original build thread < http://www.rollaclub.com/board/index.php?showtopic=14705 > When i got the car it had unfortunately been in a small prang as seen here < http://www.rollaclub.com/board/index.php?showtopic=21841 > Over the past 13months my father and i have been slowly doing bits and pieces to her. It only took me a weekend to fix all the damage to the car, had it ba…
-
- 7 replies
- 10.2k views
-
-
We'll as i already have a very clean KE30 weekender i thought it might be time to replace the daily 'commonwhore' with a real car. The old man and I found this 1980 KE55S CS hardtop via word of mouth and snapped it up. Wasn't running and had been sitting for two years. A couple minutes later after pulling apart the fuel pump, fitting a new fuel filter and hose, topping up some trans fluid and fitting a new battery she was purring like a beast! BASIC DETAILS 4K 3spd slushbox (trimatic :D ) Light blue Cloth seats which appear to be in ok condition under those hideous seat covers and that's about it for now. Plans are to get her on the road and then get her lo…
-
- 79 replies
- 20.7k views
-
-
just brought this on the 3rd of december 09 :D it looked ok like a real pig i loved it not a bad buy for $1000 but i new it needed work so yeah i have plans to make a full JDM spec lookin drift car ... i no its what everyone wants to do to the e7 but i just love the look of jap drift cars so i will do it to lmao will be a slow process but will be done... hope people can help with advice and help gide me threw it all as I'm doing it by myself enjoy reading it came with stock 4-kc falcon sprins in rear (cut) stock rims no interrier on the car but got it with the car no exhaust primer patches every where stock steering wheel etc.
-
-
- 221 replies
- 75.7k views
-
-
Hi, my names Steven and i have an addiction for Corollas.......it's been going for around 2 years now and i liiiike it :D What do i want from the corolla?? Nice daily, but of course something which you can have fun in, not obsessed with the drift scene in my rolla currently, maybe one day but not for me right now. Bought her at the start of winter, came with 15" 195's, from there i've fitted a webber.....taken it off, fitted a strut brace, left it on, cleaned her, installed some 6x9" speakers, a tacho dash and a TRD sports steering wheel :jamie: Done around 120 000k's original, owned by an old guy out in the country Body is all good, NO rust!!!?? My p…
-
- 15 replies
- 8.3k views
-
-
-
86 project is up and running. Time and money permitting should be going early to mid next year. Suspension - megan racing coilover setup, cambertops and damp/rebound adjustment. Whiteline adjustable swaybars front and rear, adjustable lateral rods and panhard JDM rear end. t3 strut tower braces, advan 14x6 rims Engine - big port blue top, 20v ITB's, t3 adaptor, HKS 272 cams, 0.7ml head gasket, valve springs, cam pulleys, microtech, induvidual coils [atta c hment=47527:DSC01391.JPG]
-
- 24 replies
- 13.1k views
-
-
Hey People! To those that don't know me I'm Kathrynna AKA RaLLyKaTTy! I have a Corolla Twin Cam 1.6 hatchback racer that I have been racing for 3 years that I am now selling and upgrading but to a non rolla... (Rolla can be found in For Sale topic) Due to, I can't get any faster in rolla I am upgrading and going to be racing in Saloons in a Ford Falcon EA 3.9 MultiPoint 6cyl Sedan. I have done a lot in this Rolla and I am please to say the 3 years that I have owned this car it has brought to me many joys of driving it. It has been in motorkhana, khanacross, autocross,hillclimb and sprints. It won me 2nd outright in the 2008 NGK Junior Penthalon that featured …
-
- 0 replies
- 1.4k views
-
-
Hi Guys, thought I'd finally get around to posting some pics of my KE18. Yes, this wagon used to belong to Gavclassic, I bought it off him about a year or so ago and the car now lives with me in Toowoomba. There was some rust in the roof that I needed to fix, so I thought that if I was going to have to repaint the roof I might as well add a little spice while I was at it. I thought that I'd pop up the few pics I had to get peoples opinions. I will take some sexy pics of the whole car very soon and pop them up for all to ogle over. I'll get around to the pics and I'll put some info on the car up in the next few days as well, just don't have alot of time right n…
-
- 16 replies
- 9.1k views
-
-
Well the story goes It was 2004, I was in Year 6 at School, I was & still am crazly into cars, I used to look at this corolla When i went to school as it was one street away from school. Me & My old man where looking for a project that me and him could carry out together. I knew my Makes & models when i was in year 6, But a ke20 wasnt one that i knew, & i was looking in the trading post and seen ''KE20 Corolla, Half in primer, Rust free Body, Original 80,000 Miles'' Little did i know it was the car i looked at before school every day. Soon after looking at it, it was at my place & we started work. It was sent for a Paint job, & Basical…
-
- 9 replies
- 13.6k views
-
-
This is my daily, its a 1983 ke70, Its got a rust & dent free body, & Has been resprayed in a metallic Green with flake, Its a home job, It isnt the best job but keeps it looking clean. My plans are to tidy it up, Change it from auto to manual, & Later work the 4k. but right now its just a Reliable daily. Although i do have a few plans for it.
-
- 0 replies
- 1.5k views
-