Rollaclub Rides

hey all, new to the forum here but i thought id show my corolla its a 74? I'm pretty sure.. its only done 96,000 kms on the original motor. tell me what you think

Okay. so i have a post here somewhere it is incredibly long and full of pointless ramble so i decided i would cut it all down to a short new one so people who havent seen it can just look here and have it all =] okay. so basically i ended up with this car because dad grabbed it up for his own use when his motor bike was stolen. then basically i bought it off him because he no longer had a use for it and i figured it was a good first car. when we got the car it looked pretty bad. the passenger side front quarter was black from when the previous owner ran into a pole and had to have it replaced. so we got out the old spray can and silvered it so that it wasnt as bad…

Hey Guys and Gals, I've finally got a RWD Daily again.......and it's a 25 :lolcry: :y: She's got a few minor rust issues......but it is 37 years old so thats expected.

howz everyone going??? About a month ago i bought my first corolla, it's alittle less then average as i will describe to you. The biggest problem with it is the rust i have pictures and will post them. The couple of mechanical things wrong with it is the clutch slave cylinder, when it is cold in second it looks like i am bunny hopping but only alittle bit, because the clutch isn't engaging properly. I also just replaced the fuel tank the old one had a crack in it and petrol is to expensive to be droping on the ground everywhere. It also needs the timing done... Cosmeticly is an all new different ball park :lolcry:. The only bit of clear coat on the car is on the f…

Hi everyone, Got over waiting for parts for the 30 so I thought I’d start a thread about my little project that I have had going for awhile. It started with a mate of my brothers getting rid of a 77’ 4 door KE30 and I needed something to spend my money on at the time so I bought it ready for me to start my first real engine conversion/project. Unfortunately I don’t have any picks of it as they were deleted off my old P.C but I’m sure you all know what they look like mine was white had black stockies and way too much rust to be a worth while project so I got rid of that and bought my current Rolla a 75’ 2 door I picked it up off a Rolla club member named bstjunkie f…

hi I'm jamie iv posted on here along time ago with me and my dads ke70 with a 308 in it track car well now i thought i would show you my project for my p platers car well its a KE70 4k-c 5 speed man stock steelies beige in color beige interior all stock i got the car of a family friend for free so its decent for free bits of rust in usual spots boot seal area, fuel filler, and behind the left hand rear wheel just goin to fix it up get it regersted then the mods come in a couple weeks I'm gettin a corona 2.4EFI (22re) 5 speed and converting all suspension and brakes ect and thats for free too I'm going to work the 22re cam package head work …

Althoug not a Corolla but still a Toyota............... Bought not to long ago after some low life stole my car. I use to have a 1979 accord sedan!! This car was an absolute rust bucket and needed a lot of TLC but it started everyday!!! But some one stole it and wrecked it. I found her back on its side in a ditch totaly wrecked. They might have tried to exceed 70 km/h but with out shockies a car gets a bit waivery.... Any way we replaced her for the Sillyca!! We love it. We are 3rd owner and both former owners have baby-ed her very well. All is original and everything works perfect. We might have to change the front shockies as the car looses grip when cruizing above…

Hi! My name is Tonton, I'm from Manila , Philippines Il Share you my 1983 KE70 Liftback Now -4AGE 20v Blacktop -Full AE86 front suspension assembly (vented disc brakes) -TRD Shocks Front and rear -Front Blue -Rear 8 way adjustable -Bride single bucket seat, Starlet GT passenger seat -15x6.5x7 Watanabe F8 -Nardi classic steering wheel with quick release -PIAA fog lights -Apex-i N1 muffler -2" Black Iron pipe Before -on 13x7 Enkei Apache Mesh -on 14x7 Work Equip -and also on 15x7 Work Ewing fins -Recaro Trend -2TG twinside Webber 45 -308 320 TRD cams -4-1 headers -TRD geartrain and clutch …

hey guys I'm fairly new 2 rollaclub and on my second ke70 project just tell me what u think and any sugestions basicly cheap drift pig 1.3lt 4sp manual so far iv done black bonnet black boot rest of car sparayed oranage it has a sunroof haha !!!!! bucket seat chopped a lil bit of the spring so not as much body rol locked the diff racing harness planning on getting some springs if any 1 knows a cheap spring or has any that r more legal than chopped let me know need 2 put an exhaust on something a bit better planning on gettin soem big f@$k off head lamps tell me what you think what could make …

FIRST POST got this bluetop 4age powered seca with a green sticker on it (like a yellow sticker but from a dealership) and have plans to make it into a khannacross beast! not much wrong with it mechanically wise. still runs quite strong with 350 000 + kms on the clock, has a cracked windscreen and dodge paint (which came up suprisingly shinier after a buff with motor oil) so at the moment just weight stripping it, taking out the rear seats, rear trim etc. depending on how she goes prob put in a rollcage. hopefully this car should be really competitive. might be a bit tall in the gearing but oh well. not sure if we're taking the exhaust off yet... prob keep i…

i had another rides and projects page but it was too many pages long and filled with mostly crap so i got the old one deleted so heres my 4agze going to be turbo this is the baby i'll be throwing on it the car out the back ATM because I’m striping a ae71 that had small front end damage parts will be for sale soon also i got a set of t18 drums to put on the t18 diff thats in the shed the insides are fairly tidy although my car is also my shed for inside car parts ahahah not the best insides but I don’t really care what it looks like just how it goes got a few ks on it but its the lowest one i've ever seen …

As mentioned in my ke30 thread I bought this little beastie yesterday, had been sitting in a grandmas front lawn for 10 years untouched. We put a battery and some fuel in and it went second turn of the key, absolutely no brakes but that didn't stop us going for a drive out of the driveway and down the driveway to the shed and in for a bit of disassembly. Anyhow I have some before photos of as I found it and after a decent wash. Still running the factory 3k with k40, has some interesting trim my other ke20 L didn't have. Though the boot is not original the L badge may not mean anything after all. I tried bleeding the brakes and had no luck there is a break…

well iv already posted her up on other forums so I'm sure a few of you have seen it, anyway i thought id share it with the others who havent and see what they reacon, don't have many pics of it on my laptop so il give you the basic rundown of whats happend over the last 2 years since i got it.. bought the car as it looks in the first pic, running the mighty 3k and driving overrated, winter came round a couple months later and the damn thing wouldnt start so i decided to go injected, was ment to be a short and simple conversion but one thing led to another and well heres a rundown on whats been done: 16v 4agze smallport head/block>w55 celica box custom turbo ma…

Hi everyone, just bought myself this nice little ke30, its got a 5k 5sp in it. I'm new to corolla's and this club helped me alot with pre purchase research. thanks to all those that contributed to the knowledge base. i've had this car for about two weeks now and i really like it. I"ll put some more pics up soon.

BOUGHT A GRANNY SPEC ROLLA KE70 FOR $1000 DAUGHTER WAS A BLONDE HOT HIPPY 6 WEEKS REGO IMBOLISER & CENTREL LOCKING RAIN GAURD HUBCAPS NEW RADIATOR ORIGINAL RADIO WORKING WITH ORIGINAL SPEAKERS ENGINE BAY VERY CLEAN INSIDE VERY CLEAN NO RIPS IN SEATS OR DAMAGE TO THE DASH ONE TINY BIT OF RUST AND ORIGINAL PAINT NO DINGS ORIGINAL MUD FLAPS STOCK SPRINGS STILL HAD THE STRIPES AND PROTECTOR STRIPS 1.3 4K RUNS PERFECT ONLY DONE 200,000 SO FAR CHOPPED SPRINGS BOUGHT XR8 SPRINGS FRONT BACK AND REAR SHOCKS FOR $1 CHROMIES ON THE FRONT BLACK STOCKIES ON THE BACK GETTING DEEP DISH WHEELS THIS WEEKEND AND HAVING THE CHROMIES ON THE BACK LOCKING D…

Hi guys, I've had this for a while now and i thought it was about time i do some more work on it.. I originally had an immaculate T-18 which i only owned for 6 months due to my brother writing off! *Spewin* ;) I then bought this KE30 4door, it was rough as guts but after i lost my pride and joy i had no money, and as a struggling first year apprentice i had to make do.. I proceeded to pull out the engine and 5speed, seats and a few other bits and pieces from the T-18 before cutting the whole lot up with a 9inch angle grinder and taking the rest to the tip! I was surprised how easy it was to fit the 3T motor and box into the KE30 though. (i didn't know about r…

I bought this coupe AE70 in November 2007 for just over a grand. I have put a couple of pics up, keep in mind these are very old pics that I took in November '07 when I bought the car, and its not what it looks like at the moment. I'll get some fresh pics up soon. I actually have two of these, One of them ive been using as the donor car, which I have pinched a couple of panels and interior bits and peices from. It sat in the garage for about 8 months after I bought it (not running) So I started to get serious about it in July and I've slowly been working away at the panels since then. It's getting painted satin black, going for an old school rat rod sort …

1974 KE25 Corolla, 3K 1200cc engine, Toyoglide 2 speed auto transmission Original colour brown, now white. Rims Mazda 1982 steel 13 inch nice deep rim Rear bar from a KE20 same bar but KE20 brackets don't fit, i have the brackets in the back of the car somewhere. Brakes KE25 discs front with rebuilt KE30 calipers and rear standard Used the car for work for 2 years and has been sitting for the last 3 waiting for me to build a shed.

Just looking for a outside opinion of my Corolla?

Hey guys, gals and in between. Been on here for a while now and only realised then that I didn't have a project thread so I thought it'd be time to make one. Also because I am bored. ;) Car started out as a bog stock 83 KE70 CS which I picked up for $500 complete with a lot of dings and original metallic paint which had lost all of its colour so was just basically metal. Nethertheless, it also had 6 months rego and was a good base to start with, as I was only on my L's then. All the work has been done by myself and my old man so he has saved me money and taught me alot about it. Being my only car, nothing to major is being carried out on it as I need to get to wo…

heres a pic of my ke30 i just picked up its a 4k auto soon to be changed to a manual and I'm gunna put some lower profile tyres put on the ugly tarago rims the body is a little rough but nothing that can't be fixed the only rust i found is on the bottom of the passenger door I'm thinking of doing a engine conversion but don't knowwhich motor to use I'm thinking 2-tg or 4age depending on what i come across first but this wont be until i got the money

Hey everyone, i just registered and thought id show yous my rolla :D Item: Ae80 corolla hatch 20v Black top conversion! Mod plated. 2 1/4" exhaust, high flow cat, resonator and sports muffler Head light covers AE82 Seca seats in the front and rear AE82 Dash cluster AE82 brakes Tinted windows SSV front lip and side skirts 17x7 apache alloys with 205/40/r17 tyres Pedders lowered springs and Heavy duty toyota shocks in the front! Monroe shocks in the rear. (Twincam Suspension) Custom spark plug cover Strut brace Klaxon horn Heavy Duty Clutch Not sure how to load em up soooo For picture go to http://jdmtas.ipbfree.com/index.php?showtopic=70

hey all this is my 1986 rolla kesev. its been good to me ( fist time its had a wash to :))

1968 ke10 5 speed- rebuild lowered front and rear ke20 front discs 12inch hubaps, white walls crx seats and interior retrimmed red vinyl 2 door 68, bare metal respray acrylic white inside, out. underneath, boot, engine bay suspension powered coated, new everything e.g. shockers, bushes, tierods etc. custom EFI alloy fuel tank EFI setup Microtek MT-8 new crash pad $$$$$ venetian retractable seatbelts lots lots more

Hey guys, Well here is my current headache. Just installing the motor now. Already installed the rear end of an ae86, tranny, front and rear susp. I know the car is all dirty and nasty right now. But the plan is to get the car running right, then tear it back down again, detail all the parts and repaint the whole shell. Then put it back together again. Wish me luck coz my head already hurts LOL. Nino

This has been a work in progress since early 2006. Finally its looking like happening. I've been planning something along the lines of the ChrisGT ke35 for over 2 years now. Stay tuned. For now i'll post some pictures of the ke35. Should be getting started on the project within the next month or so. Donor car pictures soon, and hopefully soon after that, project pictures! PRESENT: 1978 Toyota Corolla ke35 hardtop (with a nice little 4k & 5spd gb) There's a little bit of rust, faded paint and a few dents, but it is a 30 year old vehicle. Interior has been swapped from original turd brown. Now it has a charcoal carpet with cream vinyl seats and doo…

Hey all. My first post on rollaclub. Thought it would be appropriate to show you all the car I'm about to pick up. I'm 18 and this wil be my 21st car. I have owned 4 RX7s. A VLT wagz. 12A 1979 626. Mazda 323. Then a whole bunch of shitty dailys. Sold my AE80 POS to get this neat as KE70. 4AC 4 Spd Locker King sprngs Some exhaust tip haha Pictures are on my bebo page. pics of ke Plans are to drive it. Pretty much use it for a bit of a wet weather warrior. Hope i get a bit of use before it gets defected or blows up or something. Maybe put a rotor in it at one stage as a mate of mine has done it and wasnt that hard. So keep an eye on any updates. My…

Hey everyone just got this corolla Wagon for $500. I reckon its pretty good, nice body, and it goes good. I am putting a set of wheels on it with some sticky yokohama advans. Will also be doing a custom twin front shock set up which works awesome, and it should go around like its on rails. also will be lowering the front and rear so it looks good but still steers well As for the engine probaly will build up a 4k, or put a 18RG with twin carbys on it. but fuel isn't getting cheaper.

Thought i might post this up here. Had this for a few weeks now just been getting it legal. MX83 series one Body: Series 2 front and rear bars and grill, oh and a sunroooooof! Lowerd on soarer rims. Also has the usual brake upgrade. engine: 1jzgte (TT version), factory intercooler, full 3" exhaust with hi-flow cat, twin au thermo fans with digital controller. Interiour: Boost gauge, thermo fan controller (digital water temp/volt gauge). Factory everything including speakers. Future: JVC dvd player, focal splits, Alpine amps, MTX 12" sub. Going to get an ebc, maybe a few other minor things also. don't think theres any more done to the car, …

Picked this up as some of you may know!! Plans. - Bare Metal Respray - Interior rework - New bushes - A few Nos bits - 5k with Twin carbies (Someone got a twin carb manifold)? - 5spd - Whitewalls and hubcaps. Any info/help much appreciated. Thanks in Advance Luke

Hey all some of you may know this car, I purchased it of Callum (Deleta) of DC. some info on her Specs has 4k-c webber 2 and 1/4 exhuast superlight 15 by 8 0 and JDM brakes and front struts with koni red schoks and stock springs all round has (unsure of brand) racing seats in it since pics. Future mods: Have evo9 seats from 999 automotive ordered. Currently getting a 4age built by C&M Performance. With new ( not sure wich ones) pistons cam cam gears quad throttle bodies computer will be from Razorback. Will update more when i get my engine spec list Cheers Jae

So these are the photo's I've taken today (3 days after buying the car). Exactly the way I got it...but washed. 1989 Corolla hatch. 4 Cylinder. Manual. Kenwood Cd Player. 2 12 Inch Sansui Subs (I put them in). Ignore the back seat cover. (Sorry, bad photo's)

hi. i thought i would share my ke30 restoration i started about a month ago . i bought this car for 200 bucks of ebay its not in the best shape as you can see(sorry about the shitty photos). iv had all ready taken the motor and gear box out. the dude over heated the motor and cooked it. so i clean the engine bay did a bit of sanding, degreseing and some good elbow grease heres the engine bay . i can't up load any more photos so i have to wait till tomorrow

Hi people! (LOCATION GOLD COAST) It all started with a lot of internet searching and trading post articles. But back then I was actually looking for a KE25 not 35. Hence why I registered my name as KE25Punk.. I LOVE LOVE LOVE 25's and would have one as a 4ag cruiser any day. Sleepy92 and I found the perfect 35 in yellow which long story short is now his car ( http://www.rollaclub.com/board/?showtopic=21791) I loved it so much I decided that my ultimate crazy project car was going to be a KE35 not 25. My mind set behind this was that I have always driven AE86's, 3 in total (2 4AGE's and 1 with 4AGZE) but after my 3rd one and having owned a KE25 4ag small port…

So guys, my latest addition is here now.......... It has also completed my KE2? collection :P :cool: Already getting the RH guard repaired (new RareSpares section), got a New tailight last weekend aswell. Got a set of Deepdish Spitfires (13") the other day so it should start looking better and better........... Any ideas

1969 ke10 5 speed lowered front and rear ke30 front discs 12inch hubaps, white walls interior retrimmed red vinyl bare metal respray 2 pac white inside, out, boot, engine bay new crash pad $$$$$ venetian

This is my new AE71 1600 manuel i just bought it from melbourne bid off a mission but i was looking for sumthin like this for ages its only got 102,000ks original with logbooks and not even a dot off rust plans are 4agze motor going in next month if everything goes well

i can't find anu rims to go on my rolla

Hey all, well it's the first time I've posted in here! The last time I attempted to post up pics of my ride, it was giving me trouble! I have a KE30 2 door, which my uncle found for me in his neighbours yard!! My uncle bought it off his neighbour for next to nothing, and then I got it off my uncle and traded him an old car stereo of mine (CD Stacker and head unit)!! Yes, a stereo that is worth about $80 on E-bay (which doesn't play MP3 CD's) was my payment for this beast! Best of all, my uncle that wanted the stereo doesn't even have a computer and doesn't know what MP3 CD's are, so it was a perfect deal! The car was sitting around for 6 months in my uncles ne…

Alright guys so since gettin my rolla back after some inconsiderate people stole it and thrashed it i have been debating to keep it or not... it has a bit of damage and ill try and get some pics up a bit later on tonight. I'm guna need a new front bumper, possibly a new bonnet. there is also a hole in the guard behind the rear left wheel from when it blew. is it possible to replace the panel or will it require a fibreglass/cut & weld job?? any other ideas while I'm at it?? and it may take a while cos I'm a bit strapped for cash atm, hence y I'm contemplating sellin it. cheers guys