General Discussion

Hi Guys, new to this forum. Thanks for having me. I'm moving from Qld to Syd and will bring across my KE30. Currently on full Qld rego. The car is modified with a 5K motor, K50 gearbox and diff to suit. Everything else standard. It has been engineered in Qld to be registered. However, I will need to do this again in NSW. I would like to register the car under modified historic registration with the club once in NSW. Can anyone tell me what I will need to do to have the car ready for historic rego and estimate of cost involved? Thanks in advance.

Hey fellas ive recently brought a ke70 with a old tired stock motor I'm ripping it out am thinking og putting a 4age motor in just for my first attempt of a conversion is there any good sites i can buy one ready with gear box and computer i can get delivered

Hi Guys, just joined the club and wanted to say hi, not new to Corolla's but it's been a long time - bought a Ke20 brand new back in 1973 (yeah I am that old in body not mind) and raced it for the next few years until I totalled it. Had a pretty hand setup making lots of H.P. great handling and all the rest. That was then. So now I have decided to do it all again - bought a fairly ordinary Ke20 with "good bones" and am starting the resto procress. I already need a front bumper, bonnet, stone tray, urgently so if anyone can help please give me a shout. Yeah the car turned out to be "a bit different" to what I was promised in the add and on the phone and was supposed to com…

Đà Nẵng hiện nay đang là một điểm du lịch nổi tiếng thu hút lượng lớn du khách. Với nhiều điểm tham quan, giải trí, nghỉ dưỡng Du lich Ha Noi Da Nang 3 ngay 2 dem ắt hẳn sẽ đem lại cho bạn những trải nghiệm tuyệt vời, những giây phút vui chơi thoải mái nhất. Hãy mau xách ba lô lên và đi thôi nào!Phương tiện di chuyển khi du lịch Đà NẵngTừ Hà Nội, bạn có thể đến Đà Nẵng bằng: - Máy bay: có thể săn vé rẻ của các hãng JetStar, Vietnam Airline hay VietJetAir- Tàu hỏa: nhớ mang theo CMND khi mua vé bạn nhé, thời gian di chuyển khoảng 14 đến 20 tiếng, bạn nên đặt vé tối để có thể ngủ một giấc sáng dậy mở mắt ra đã đến Đà Nẵng rồi- Xe khách: có thể tham khảo các hãng xe lớn như …

Hi All id like to hear anyone's thoughts on a 4Y transplant in a ke70. Has anyone done it, mainly as a civil daily driver. Any input greatly appreciated. cheers Max666

Hello. I've recently replaced my Pcv valve and wondering which way to goes. I bought a fuelmister branded one and there is a short side and a longer side.

Hey all, I very recently acquired a 5k motor and I plan to fit it to my Ke70, I know how to do the engine swap so no questions there Since Currently the 4k in my ke70 is worked (2x 40 DCOE webers, Tighe 104 cam, 2' inch exhaust, 40 thou overbore for ACL pistons, All rotating components have been balanced, lightend flywheel, MSD 6a ignition system w/Blaster 2 coil...etc.) I've had my hand on working 4k's...But I've honestly done a 5k before so in the interest of learning etc. I'd like to know this What mods/specs have people built their 5k's (must be n/a, no forced induction) to, What kind of power output am I looking at (Streetable... like the 4k above)..…

hey guys,it's me again,i have a 2K engine in my pickup-KP36,and i really need some help :/ .First of all i m looking for an intake manifold to buy,from europe,only for 2K engines,and about 50-85 euros.Second,i have to know if it worths all my tries until now about putting my cbr 600 carb.I didn't do any mods on the engine inside,i just run on a little more psi fuel pressure from my cbr 600 fuel pressure regulator.Any help will be acceptable,and please tell me how to write my topics on rolla club page only,as i am new here.

hey everyone, so I've installed a new tacho instruments cluster into my ke70, it had the good'old quartz clock cluster, and everything works, but the fuel gauge, I don't remember if the old one worked (still have in just encase there is part failure), but I've taken out the rear tail-lights cause I'm doing rust repair, and I noticed that the fuel gauge wasn't moving and staying in the off position, when the car is running, all the other things in the cluster work cause Toyota just used a standard wiring loom for all KE70's. so the question is, does the fuel gauge wire run though the tail-lights wiring? not 100% sure. and I can't find a wiring diagram that says anyth…

I really want to learn more about that powerfull engine,and when i say how it feels,i mean stock or modified,and if it is better than 4A-GE or a 7A-GE(With 20v and Crina's blocks,just like Keiichi's).And what do you thing is better for this engine,turbo,carbo-turbo or EFI turbo?

I don't know much about this car except it is a second owner car. With 47000 original miles my question is simple is it worth 1000 dollars.

Hello all! I'm Jonathan from sunny southern California. Currently working on a 1982 TE72 sedan. Thank you for having me here.

Hey guys I'm looking for someone in SA (preferably Adelaide) to help me install a full manual conversion in my old reliable. I've got all the parts ready, including a bunch of extras I can't wait to get in (air con, ae71 quad headlights and more) Even if you know someone who owns a good shop that will give me a good quote, send me a message. Thanks!

I need to know if i cam get ae86 lowering springs can i put them on my ke70 please yes or no is best and would love if there is any fab required. Thank you

hi i have done lots of research on what motor to put in my ke70 I'm looking for something that will go onto the trans i have and fit on the engine blocks that are in the car from its original 4k that i have don't want to go super fast just something like a 2L or 1.8L with electronic intake not a carb just looking to here some ideas from you guys and what you would do

hi looking at putting some new wheels on my car been looking at some on rota (taged a pic) what i want to know is if i get some of thees wheels at 15 by 7 on the front and 15 by 8 on the rear with a 0 offset on both and a 50 sires Tyre with the side wall with some stretch under the car plus I'm happy to lip the grads but i do want them to be under the grad at the end of the day i am also going to lower it a bit but i want to get the wheels on the car first so that i know how far i want to drop it thanks

What causes this to happen? is it fixable?

81 te72. 3tc. Idles great, timing is perfect. Has a no name ebay header, bone stock otherwise. Stumbles or missfires all over the place. Replaced stock smoggy carb with one off of a 85 4ac. As far as i can tell its the exact same carb (other than the fuel line was different, being fwd. Swapped it to mine). Yes its a non rebuilt junkyard carb. Anyhoo, runs ABSOLUTELY no different. So its either the same exact level of crappy as my old one, or theres other issues. Checked for vacuum leaks with starter fluid and found none. Wondering if its the coil/modulator thing? Ive heard they are somewhat problematic. If y'all think thats it, then the next question is thus: the junkya…

wanted some insight as to which way I should go from carbureted to fuel injected

As the title says it all, I just want to know if its possible to put that gearbox behind the 4A-FE car by engine? Don't care if the gear is not strong enough or should I go for T50 blah birdy blah blah. Regards Syed Abdullah Mohsin DAISTEP

Hi guys, I have just bought an 83' KE70 Corolla, I am planning to make a sleeper out of it, after reading a lot of forums on the mods for the suspension, diff, breaks and engines, I've decided to built one on the SR20DET engine from S13. :) I just wanna confirm with u all here the parts needed for all the upgrades. Engine, -SR20DET from Nissan S13 halfcut. -SR20 conversion kit for KE70. Transmission, -Nissan S13's transmission, mounted onto KE70 with the conversion kit. Suspension(front), -Aftermarket coilovers for AE86, AE86 steering arm and AE86 wheel hub Suspension(Rear) -Aftermarket coilovers for AE86 Front Brakes, -Aftermarket wilwood big break…

hey does any1 no what offsets 14" longchamps come in? also wondering what would fit best under my car was thiking 14x7.5+0 front and14x8+0 on the rear but not sure if theses wheels come in those sizes. hit me up if you got some for sale

Hey so I've recently brought a 1982 ke70, with a 4k in it still. I also brought a set of extractors off ebay. I went to install them only to find that on the intake manifold, there is a little tube that's goes to some sort of filter (I'm assuming that's what it is, laugh if you will) and then continues into The exhaust manifold, so if I install the extractors it doesn't have the little port to connect anymore (unless I make one, which I do not want to do) so can you tell me, do I need this thing? And what exactly is it? What does it do? This is the only photo I could find on the Internet, and it's a terrible angle, so sorry in advance. Thanks. P.s. Ignore the arro…

Hey guys, I'm after some parts for my new 1984 Ke70.If anyone has these parts please get in contact because i am more than keen on these parts.I am after bumper bars for the front and back of the slant front ke70.I am also after some taillights. -Cheers.

Hi there I new to this sort of stuff but anyway I have a ke70 project car it has a 4a cross member in it ready for a 4a to be dropped in, but I'm having troubles with the gear box I assume I need a t series gearbox but does that mean I need to change the gearbox cross members from k40-t50 and if so how hard is that to do. And also with the diff do i need a ae71 manual tail shaft and will that fit a ke70 diff?

Hi I got a 1980 Ke70 with 4K, usually when i turn the ignition i can hear a relay click in when i try to start the car, but now theres nothing, and it seems no power is going to the starter when i try turn it. Battery and everything is fine, so i suspect its the relay, but where is it located? Thanks for ur help, Tom

Drew Edward Thompson‎Rollaclub.com April 7 at 2:52pm · Kilcoy · I got a question for everyone? Is it true you can put a 4age into a ae71 with no mode plate cause it's a bolt in engine and their is no need for modifications done. And if so does that mean you can put one in and drive it on your red p's. Also some people say it's calassed as a EFI or something, just confused. Craig Tregear The E means EFI (I believe). The C in 4AC is for carburetor (sometimes the C in Toyota engine numbering means Californian emissions). Craig Tregear You just need to be careful about the difference between no modifications requires and production option (as I don't think …

Gday, Ive just joined up after buying a one owner brown Ke70 sedan off an old lady, true story! She wanted the thing gone as she can no longer drive and I felt sorry for her and kind of like the car. Its an 85 i think, brown, auto probably a 4k motor. Its has surprisingly tidy for its age with 2 small spots of rust and is completely original down to the receipt in the glovebox from when she bought it new! Plans at this stage are to throw a set of old style rims on it,( maybe jellybeans, hotwires or minilites) possibly a manual conversion and either warm up the engine or convert to a larger one. Basically i just want to make it a little more fun to drive? Anyway Ive h…

Hi, I am looking at removing some of the door trim on my ke70 so i can get behind to remove some rust and paint over it. whats the best way to do this?

Hey just brought myself a ae70 corolla was just after more info on the difference between ae70 and ke70 ie 4age engine swap, changing stud pattern and LSD diff that doesn't require shorting and the best and easy way on lower it cheers for the help any info would be appreciated -😉

Anyone knows where these side marker lights come from?! Such a nice detail!

Does anyone know if it's possible to get bolt on flares for a ke70 have looked but can't find if anyone knows please help

Hello ladies and gents, I picked myself up an '81 ke70 a few weeks ago and wish to put club plates on it in a few months once the rust repairs are done. Just wondering which clubs you guys have had rego with and how you have found them to deal with (requirements and the like). I have google searched but not really found what I am after so qny input would be appreciated Cheers

Hello rollaclub I have a question about my 4age 16v conversion. Will a standard KE70 rear axle be enough to handle the abuse of a stock 4age 16v with minor mods? Or do i have to search for a ae86 rear axle? Because in my country they are really rare and super expensive. I'm not planning to use my car for drifting or racing. It will be just a street car. Thanks

Wondering if anyone can point me in the right direction for and drivers door for a ta22 celica 1974

Hi, does anybody here has a copy of the haynes manual?

Hi guys. Do you know if any 2dr Ke70 around for sale? Preferably quadlights model but whatever found is welcome. Thanks is advance.

hello there,I'm chasing some advice,i have removed my old rear window rubber from my ke70 as it was cracking,and i found a replacement on ebay,but what I'm finding hard to find is the beading you insert to keep the rubber pressed out against the glass,can anyone help thanks

I have recently acquired an 82 ke70 cs that is in as near to new condition as you could find. I was after a much older coupe or wagon project and came by this, not being able to resist due to its condition i now have buyers remorse as it isnt what i really wanted. So i was after some opinions as to what it may be worth thinking i might sell it to persue my original ideas. The car is a white 1 owner 64000km always garaged, the blue interior is basically unmarked including the carpet apart from a small tear on the drivers seat around the shoulder area. The body is amazing with two small rust spots on the rear panel where the boot shuts and unfortunately a dent in the passen…

Hello there I'm the owner of a ke70 and i'm planning to do the 4age conversion alongside upgrades to the suspension (coilovers, ae86 suspension all round, ae86 brakes, etc) Now i need some advice on whether or not do the engine conversion first and then the suspension or vice versa? The suspension i can do no my own but the engine conversion i cannot. So what do you guys recommend doing first? Thanks in advance