Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by KE70MAN,

    hey guys, kinda don't have the money for a 4age conversion, but i was thinking about putting a turbo on the stock 4k-c motor. turbo would not be bigger than a T25g so boost wil be max of 10-15psi, but i wont have intercooler so like more around 5-7psi. has anyone done or know somebody that has done this? also i was thinking to myself, cus the intake and exhaust manifold are on the same side, the turbo would have to sit a little low. is there anyway or any brand of side draught carbies i can get so i can sit the turbo a little higher? another thing that came to my mind was that maybe the 20 yr old engine can't handle a bit of boost, like head gasket might blow? I'm n…

    • 219 replies
    • 560.1k views
  2. TEDDY'S NOOB GUIDE NO #0052 4AGE into RWD KE70 / AE71 / *E7* Conversion Notes Hey All. There's not a day that goes by, when someone ask's *How do i put a 4age into an *e7* ! Basically, i keep pm'ing people about it and kindly showing them where to go, but its getting a bit rediculious. So, here i present to you all the links i know off, that can help you out with your conversion. Its almost a copy from the same thing i made at rollaclub, but more things have poped up since. So, its a revised list as such. Please read it, because there is **alot** of data in there. Basically from now on, any topics *how do i install a 4age into my.. etc* will be trash…

    • 38 replies
    • 786.8k views
  3. Hey all, i put this up on ae86dc but thought i'd chuck it up here if there was any interest. I recently had some success with my 4age conversion into my ke70 in that i was able to get it made "legal" without engineering. Long story short, applied through regency, they said alright, got car inspected, and they're in the process of issuing a "certificate of exemption" for me. Not sure how many people will be interested in this, but can't hurt i guess!

    • 11 replies
    • 51.3k views
  4. Started by LittleRedSpirit,

    Engine/cooling/mounting and clutch Parts required 4age 20v engine filter socks yager motorsport front thermostat fitting modified rear cooling plate side water blockoff plate aftermarket engine computer dizzy cover AE86/71 clutch master cylinder AE71 manual pedal assembly if you have a ke70 Slave cylinder to suit the gearbox either jdm or adm 4age flywheel, 200mm or 212mm Clutch to suit, yes you can use the ae101 or ae111 clutch with 212mm flywheel rwd exhaust manifold/extractors coil and igniter, for wasted spark and custom leads or 1zzfe cop setup with inbuilt igniters AE86/AE71 engine mounts - steel and rubber sections. AE86/71 …

    • 37 replies
    • 275k views
  5. I thought I'd write this for the guys just joining and full of enthusiasm to build a fully sik drifta. Hopefully some of the members who have completed projects (and some who haven't) will add their wisdom. First- Decide on how much time you are realistically going to spend on the project, which means listing what you are going to give up to do it. We spent two nights every week and every Saturday working on the rally car when I was in South Africa for a decade, and that over-rode almost anything else. Without that sort of discipline it will be too easy to give up when you hit a hard part. Then- make a list of what you want the car to do. Drifting, track-work, …

      • Like
      • Upvote
    • 25 replies
    • 168.3k views
  6. Started by SkiDMaN,

    Heres my on going project i thought id post for all the people that don't know about it. Various pics of install after recieveing it back from the shops it was running on 5 cylinders and not holding a idle.... those problems have been fixed... now all thats left is exhaust, brakes, suspension and engineering i have the brakes and suspension from the front cut (jza70) so this weekend will be the attempt of bolting up those brakes... and hopefully the strut tower to the silly car. exhaust goes on in 3 weeks and then 2 weeks later will be engineering... so yes... to all the people asking... it will be back on the road soon :D ill keep posting on hear as …

    • 7 replies
    • 22.7k views
  7. Started by DROLLA,

    hey everyone I'm interested in turboing a gze in to my ae 92 (Q).. what turbo to use.... is a cutom plenium a good idea and what motor did the lsd gearbox come from to fit this conversion any help

    • 1 reply
    • 14.6k views
  8. Started by Wood§tok,

    http://www.toyotacelicaonline.com/celica1/...1/3sgteswap.htm pretty good i thought. good links too...

    • 0 replies
    • 13.1k views
  9. Started by tRd_dRifTn,

    Hey Guys I need a little help I need to find out how similar the RA60 or the RA40 Celica is to a 82 Rt 133 Corona. It has the 21r-c in it at the moment. Ive got a write up on the full conversion for the 1GGTE into a RA40 or 60 but its not a Celica so I'm not sure. The RA40s engine bay is nearly identical by looks. So someone no's who similar they are can you please tell me the differences so i can hopefully get it underway. :blinks: thanks trd_driftr

  10. Started by bridgeport,

    use the a series crossmember from a rwd levin i know that much what gearbox do i run t50? what diff and driveshaft ?? will i use the same selector stick? and hydrolic clutch??? radiator capable of the engine? just a stock bluetop

    • 4 replies
    • 3.9k views
  11. Started by VLt,

    hey I am after some help on turboing my rolla its a k series engine namely a 3k and i want to run a blough through turbo set up, but don't know how, any help or advice would be much appreciated. Cheers,

    • 10 replies
    • 15k views
  12. Started by mumblezzz,

    A friend of mine has basically a complete 12A turbo engine in his garage and has offered to do an engine conversion for me for extremely cheap. It is my understanding that this wont be legal but he seems to think it is. What i want to know is if its a good idea? Can it be engineered and if so what sort of work would be required to get it to pass? also what would be the best way to go about strenghthening the chassis. I was thinking roll cage and seam welding or is seam welding a waste of time?

    • 24 replies
    • 30.8k views
  13. Started by Teddy,

    Hey - Another question from me! :) How hard would it be to change motors from the 4-k to a 4Age motor (the 100 kw, 16 valve twin cam) Just wondering :D

    • 12 replies
    • 6.5k views
  14. Started by mumblezzz,

    I'm set on a 4ag conversion for my car as it seems a waste of time to put in another 4ac to only rip it out in a couple of months time. So what I wanted to ask was what ingreients do i need to make sure this conversion isnt half-baked. I realise I need a: 4ag engine, loom, ecu, mainfolds, alternator. Anything I missed?? Fuel pump, surge tank. Any reccomendations?? Lines, hoses etc Have I missed anything important? What can i recycle from my old engine? Any help, tips, experiences would be appreciated.

    • 4 replies
    • 14.6k views
  15. Started by Teddy,

    Hello All You are probernbly wondering what is this bloke on this time - yeah, the air con idea caused some talk, but ive got another idea (s). :D Lets see. The 4kc Engine is a good engine, with some mods, it could possibly make some serious peformance (take nicks 4 example - its not completly suped up, but its sure 1 hell of a ride). I was thinking of moving a 4kc engine in the engine bay so its upright, (the are actually on an angle) and move it to the right as far as possible, and then go and get anotther 4kc motor, and squeez it in beside it ! ! ! Now, some complicaiotns - u connect the engines like in a gokart - or like on the belts at th…

    • 7 replies
    • 15.2k views
  16. Started by demuire,

    Have big doubts if anyone here can help me, but thought I'd throw the question up anyway. Currently wiring up a small port 4AGE loom into a KE35 Corolla, have a few questions: 1) 4AGE has bipolar (or something) ign barrel, can I just wire both circuits up to my ign barrel? They run through a 40A and 30A fusible link, do I need to run these fusible links too? I've got a 100A circuit breaker on the battery (in the boot). I don't have the 4AGE fuse box so don't have any fusible links or fuses or relays at the moment. 2) 4 wires that I think go to the ign barrel in the 4AGE. I have IGN (B-O) and ST1 (B-W), do I wire up the other two (both B-R, one big, one small) to …

    • 3 replies
    • 7.1k views
  17. Started by Teddy,

    Hello people I have been doing my research on engines, and I'm slowly geting to know all the stuff - a big thanks to everyone who has helped me, i wouldnt be this far if it wasnt for you! There is a guy selling a 4ac in the next month or so, who is willing to get rid of it at a very good price. He has offered me a very good deal, and I'm actually considering it. Yes, i know its not a 4age, but on my budget - I'm not sure how i could afford such an engine like that; espically when the cost of getting it to a running stage was adleast $1000 away... So, Lets say i purchased this 4AC motor (completly working condition), and i wanted to put it in my car. So fa…

    • 53 replies
    • 57.3k views
  18. Started by irokin,

    As of a few minutes ago my engine build is at this stage. Pistons and conrods are out Crank is out Timing chain is off Cam is still in the block I'm currently considering sending the crank and rods off to get cryo freezed. I'm also looking into getting some standard bore ACL Duralite pistons. At the same time as the crank and rods are away I'll get the block hot tanked and decked so its nice, flat and CLEAN!. EFI should be here in a week or two

    • 0 replies
    • 13k views
  19. Started by Teddy,

    - Whats this ? - What excatly is this process? Cheers, Teddy

    • 0 replies
    • 12.6k views
  20. Started by Teddy,

    Hello all Well, I'm still researching engines and all that goes along with it. As every 1 knows by now, i would think later on down the track i would want somting Slightly more powerfull than a 4k !, But I'm not sure what.... After reading MANY articles on engines, and what people have done to there cars etc, i would think i could get a good setup for about 2500 / 3000. 13B, 12B turbo, 4ge, 4azge.... the list is endless. As long as the TOTAL COST is unda about $3000 (that encludes everything so i can get in and drive it away) If you were in my feet, what would you do / be looking for ? All positive and negitive feedback welcomed. I have not…

    • 45 replies
    • 40.9k views
  21. Started by Teddy,

    Hello All Well, i was thinking - What is the MOST POWERFULL 4 Cyl engine ever released in a street legal car? (Teddy can see the 4Kc getting upset outside :| "there there little 4K...") :)

    • 25 replies
    • 6.9k views
  22. Started by 2stroksmokr,

    gettn a 20 valve out of a mates rolla so i can put it in my hilux.what box should i run with it?has anyone here turbod one of these suckrs?Is it hard/expensive to pick up an inlet/throttle body to fit a 20 valve,cause some fag flogged it. cheers

    • 3 replies
    • 12.6k views
  23. Started by Teddy,

    Hey All When they say Twin cam 16 V - 2 inlet, and 2 outlet for each Cyl = 16 (2x2x4) When they say a 20 V twin cam - theres 4 extra valves hanging around there somwhere lol - Where are they? - I'm really not sure where they could be hidden?! (glovebox?!)

    • 6 replies
    • 12.2k views
  24. Started by Teddy,

    Hey all Well, after 2 days karting session with a friend (archefield carts) ive got an idea. 1 of the guys there was talking about a Rotax kart which had a 500 CC motor & a 5 speed attached - did the 1/4 mile in just ova 11 seconds - and could do wheel spin around the hole archefield kart track in 3rd gear... :D So, This gave me the idea. Rotax + Rotax + Rotax + Rotax = (500 X 4) = 2000 CC ..... into ke70... .... .. - nar - :P Why do that, when i could go and get a super bike motor that redlines @ abou 14 k, connect it up into the ke70, using all mod bits to get it to fix, and see how that goes :D (Disclamer - its only a '…

    • 6 replies
    • 19.2k views
  25. Started by OKE055,

    found this video of a 20b ae86. http://www.turbocorolla.com/media/video/3rotorAE86.asf

    • 11 replies
    • 13.7k views
  26. Started by chrizer,

    Hi, I'm new hear and need some help with my conversion. I've got a hydraulic clutch from an AE71, but need some help with the KE70's pedal box. What do i do with it. Modify it, or can i swap the AE71 pedal box over??? :sad: Also, with the fuel setup. What have people done. I've got a surge tank, Vl turbo high pressure pump and a pre pump. Where is the best place to mount this gear? Boot? Under car? Engine bay? Also how have people set it up. Thanks

    • 42 replies
    • 38.4k views
  27. Started by andrew,

    no i am not crazy, i am putting a 1ggze in a st141 for my brother and was wondering if anyone new of anyone to whom has done a similar conversion.

    • 2 replies
    • 10.9k views
  28. Started by TOMsGPTurbo,

    Did you know that my car - Maxi (TOMsGPTurbo) was the first Toyota Corolla II GP Turbo fitted with a Starlet GT engine in Australia! Before I started I looked for information about the conversion everywhere possible with no-success at all (including contacting all known EL31 owners in Australia and around the world!), so I bit the bullet and went ahead ... and after publishing what I had done... there is atleast another 4 cars in Australia who have completed the conversion. Strangely the Japanese GP Turbo club (EL-R) have no info on any of their cars with this conversion. Meaning maybe Rolla-Club's GP was the first ever GP Turbo in the world to do the 4EFTE conver…

    • 4 replies
    • 11.9k views
  29. Started by MR AKE70,

    hi all, I'm seeing the bank manager soon and need a rough price on the conversion, SR20 turbo 5 speed, hilux diff lsd, or other (please suggest?) brakes??, suspention??, fuel system??, engineer cert.?? and any other surprize costs?? your help will be greatly appreciated. :)

    • 15 replies
    • 37.5k views
  30. Started by 51YKE,

    i wonder how easily the sr20 in my ke70 would go into that?? Do they use same chasis, engine mounts, cross memeber blah blah as a ke70?? Are there any major differences between the 2??let me know

  31. Started by Peter,

    converting wifes ae82 to efi and need standard ae82 wiring diagram anyone have any idea where to find on the web. peter (ke20 from hscc motorkhana's)

    • 2 replies
    • 12.1k views
  32. Started by David,

    Hello I need some help here;) I own a KE70 82mod with a 4k engine I want to change the engine to a 4A-GE from a AE86 GT ( RWD ) I found the engine at a wrecker and a gearbox but i'm not sure if its a T50 or K50 but its from a AE86 GT 84mod I will remove the 4k engine and gearbox K40 ( or something simular ) I will buy the 4A-GE from the AE86 GT 84mod the engine has gone 140 000km ( my KE70 has gone 136 000km ) the price for the engine and gearbox is about 800 US-dollars, is this a good price? I live in norway so its very difficult to find a RWD 4A-GE because the AE86 is very rare around here I have also found out I need to change my clutch, what do I nee…

    • 36 replies
    • 19.9k views
  33. Started by MD0086,

    Just wondering what you guys thought of this particular conversion? Is it worth it?? HAs any one seen this done before?? What are the pros and cons to this conversion?? Thanks Michael

      • Upvote
      • Like
    • 45 replies
    • 26.7k views
  34. Started by CoronaC,

    hey I'm just wondering if anyone knows how much a conversion would cost to put a 1jz-gte into a 1983 st141 corona and where within nsw would there be someone able to do this type of conversion.

    • 6 replies
    • 11.9k views
  35. Started by justatoy,

    Hey all i need some help i want some more power without the whole conversion bit so I'm thinking of a 5k but can i just bolt it in to my ke55 crolla coupe is the 5k bigger than the 4k?????? if anyone has engine specs on a 5k could you plz post them

  36. Started by Savage,

    Hey guys and gals, I'm sure everybody here has an idea about what they want to do to there rolla, I'm kinda in the same category although I'm a little stumped. :D i want to do something original with my ke70 in the way of engine conversions. does anybody have any ideas on what might be cool to try? thanks in advance, later. ;)

    • 122 replies
    • 132.9k views
  37. Started by mumblezzz,

    Stupid question here. I'm doing the wiring up on my red car ATM and i need a little help with how to wire up the ECU. There are two wires +B1 and +B. where do these get connected to. I assume they are to a relay of some kind. BATT I assume just goes to a constant 12v and FC cuts fuel when the engine stops running and the ignition is on. Any tips where to plug these in?

    • 19 replies
    • 20.7k views
  38. Started by tricksta,

    Hey all, Does anyone know if this has been done, or anyone who has done this conversion. - Sr20de into Ae82. What I need to know is - if the engine will go in without too much fabrication. ( Engine Mounts ) - Will I have to have custom driveshafts made or will there be some I can use. Wiring is not an issue as whole car will be rewired. Any info on this is much appreciated.

    • 20 replies
    • 7.6k views
  39. Started by David,

    which engines will fit in a ke70 without very much work? 1.6l or bigger I don't wanna run EFI because then the conversion job will not cost too much money I have a 4k engine now 4A-G(E) ? 2T-G ? which toyota's can I find these in 3Y ? does this one fit in a ke70?

    • 17 replies
    • 38.6k views
  40. Started by cartunez_KE55,

    hi all I'm looking to get a new engine put my corrolla with in the next 18 months. Ive got a KE55 and have no idea what to put in it. i was just wondering which one would be the best to do if you were on a budget??? thanks guys andrew :D

    • 10 replies
    • 12.8k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.