Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
:) Hi every one my conversion is complete been 12 months since i have been on but all done now. worked 302 windsor c4 auto and nine inch diff in my ke55 coupe it is awesome. Have a look at the pic's.
-
- 30 replies
- 35.7k views
-
-
gday ya'll ive found meself a bit of a deal on a rebuilt 18rg twin carb and a 5speed for $800 and was wondering if it would be possible to put it in my 1984 ke70 with mods of course but has it been done before?? cheers corey
-
- 30 replies
- 29.7k views
-
-
Okey dokey for all you experts.... i would like some advice on turboing my 20v. what would be a good compression ratio to aim for and how to achieve. there is a guy in the states though with a rotex charger running stock internals. but has ported the exhaust side and is running 15psi and has been for 9months. i reckon that asking for trouble with such a high comression ratio. i want a decent power gain in the region of 150-160kw atw. but i don't want to lose off boost driveability. cheers, Luc
-
- 30 replies
- 8.1k views
-
-
-
-
-
-
hi there I'm new and since ive joined have not been able to get off the computer, nor out of my shed :P this site is pack of good info cheers to all.. just picked up an auto :P ke70 with only 120.000 k on the clock ! and am looking at convert it to manual ????? am i better off of buying a 5k 4ac, 4age instead of mucking around and converting 4kc after all i am wanting a little extra power car is not my daily so do have the time, and i am no mechanic by any means but am keen on giving it a go and money well that comes and goes i do want it to be as little as possible though without taking to many short cuts thanks
-
- 30 replies
- 9.9k views
-
-
Does anyone have any info on the best option to take when chooseing an engine for my Ke35 rolla coupe?
-
- 29 replies
- 33.3k views
-
-
Would you think this would work? Being as smaller V8 from the early Holdens, this was a crazy thought. As people can convert a Commodore 3.8 litre 6 Cylinder motor into one of these little beasts... could it be possible to cramp this oldie but goodie carby 8 motor? I know there are Supra 5 Speeds and/or Celica split case 5 speeds applications for this motor, so the questions would be.. Has it been done? Can it be done? Should I do it? Or should I just try and source a 7K motor and go crazy one of those motors? Honest opinions please, so if I get laughed at... oh well.... stranger things have happened :moon:
-
-
- 29 replies
- 35.2k views
-
-
hey guys I'm posting up once again because i have made another thing wrong with my conversion ha ha, i have lost the bit that goes from the slave cylinder to the clutch fork does anyone one have one lying around or know where i could get one and if anyone has a picture of one because i don't even know what it looks like I'm lost. Now i think its serious ive finally put everything on ready to go whoo and i was putting on the engine mounts and i was missing a new bolt soo i decided to put the old one back in there.....mistake as i was tightening it i heard it snap and it just got all loose and came out dammit and i was soo close how would i take it out?
-
- 29 replies
- 16k views
- 1 follower
-
-
when i was researching engine options for the triton i found out that the mitsubishi FTO had two types of v6's in them a 1.6L and 2L and also they came as turbo, naturally aspirated and twin turbo now i'm thinking if thats the case because of the size of litres in these motors does that mean you could probably fit one of these motors into a rolla and still get it registered
-
- 29 replies
- 8.1k views
-
-
ive been trawling different forums and search's all day and been dreaming big and need some positive input from all whos got the time to read this post. I'm getting a ke35 that a mate has had for years and ive always wanted a berko project, and big respect for him moving it round with him over the years so i want something crazy. Now qld has some pretty lame engineering laws, but so do most states, but i just don't know what engine to put it this 35. I'm gonna do the hilux/pug/corona front brake conversion with coilovers and run a shortened borgwarner rear. keeping the rear leafs stiff with caltracks, instead of crazy fab work like 4link etc. I'm a fitter/turner by tr…
-
- 29 replies
- 13k views
-
-
When I bought my te27, it came with a 3t-c, and it seems pretty gutless. Granted it needs a good once over to run at the glory it once did, would it even be worth the money to hop this motor up or should I look elsewhere for power?
-
- 28 replies
- 9.8k views
-
-
-
Hi another engine conversion I have been contemplating is the CA18DET out of the S13 Silvias. This would go like stink, making an easy 150rwkw with just exhaust, cooler, pod filter. that sort of power in a 900kg car should run easy 12s and be capable of some mad skids. Whats youy opinions and what mods would be required to fit it and obviously the matching 5 speed box. Ben.
-
- 28 replies
- 11.1k views
-
-
hiya boyz and girlz, I was looking at some info on the 2zzge and I know that lotus used this engine in a MR lay out, but has anyone seen or know of any one that is in RWD lay out? Maybe in a rolla. Thanks Chris
-
- 28 replies
- 173k views
-
-
Just considering all my options with engine conversions. I thought i might try something different. Rather than the usual CA18DET 4AGE 4AGTE. I have seen a video of a trueno that had done the conversion in japan but other than that i haven't seen anyone else do it.
-
- 28 replies
- 9.2k views
-
-
hi i waz just wondering if it were possible to modd a 98 camry v6 into a ke 70with a rwd gearbox as i have access to a 98 camry running for 500 bucks. So just thought i would get someone elses opinion before i start wasting my money hahahaha. CHEERS :P
-
- 28 replies
- 44.4k views
-
-
woohoo, my 5k is now together and ready to go in my ke15 tomorrow. the 5k has 9.5:1 CR, mild porting, valve springs with dampers (good for over 8 grand), tighe 113 cam (25/65 65/25 400 thou lift), solid lifter conversion, double row timing chain. should go well. :)
-
- 27 replies
- 19k views
-
-
Ive just joined :thumbsup: Heres a few pix of my Girl friends dx corolla in the build and finished. I use to be a panel beater and my brothers a spray painter so that always helps to cut costs :D The car took just under 2 1/2 months to complete which = alot of late nights ;) The only reason we were dumb enough to attempt it in that time is because a car show was coming up fast. Just a few :D :D Theres quite a few pix of some of our other cars and some of our cruz's we have over in NZ on our site :thumbsup: www.jascoautomotive.com
-
- 27 replies
- 37.7k views
-
-
hey i was just wondering if anyone has put a v6 into a ke55
-
- 27 replies
- 17.5k views
-
-
Hey boy thanks for the specs I'm really thinkin about the 20valve as long as it will bult right in how much work would it to be to super charge it :thumbsup: thanks
-
- 27 replies
- 9.2k views
-
-
Hi I'm from south australia and am new to all this so sorry if I'm stuffin up your boards lol :) . i have a 2 door 1975 ke30 corolla that i have just completed a draw through turbo set up on. i have locked the distributor and set it at around 17- 18 degrees. i am using a turbo from a 12a rotary running around 5-6 psi (soon to be 8- 10 psi) and a 32/36 webber running 98 octane fuel. i have found the webber to be really rich and i have down jetted it by putting a 175 in the primarys and a 145 in the secondrys but is still really rich. i was wondering who else on here has done a draw through set up on a 4k-c and what carby and settings they used or would advise When i f…
-
- 27 replies
- 28.8k views
-
-
I have posted most of these pics before but Its been a long time since any work has gone on but finally some progress. These first 3 pics are what the car looked like when I purchased it
-
- 27 replies
- 27k views
-
-
trying to find info on any body puting a nissan sr20 det engine into a ke55 rolla and geting it engineered in melbourne,ive search and search the net for days on end but nothing comes up has any one at all heard of any one doing this ????????????????????????
-
- 27 replies
- 7.8k views
-
-
HEY people DO ANYBODY DID A ELECTRIC SUPER CHARGE ? OR HEAR OF IT ? :cool: :dance:
-
- 27 replies
- 10.1k views
-
-
Ive looked everywhere on the net to see wether or not its possible to pull a rubbish starfire out of a xt130 Corona and drop in a holden 6 (202) and ive found no answers. I found this to be surprising considering the engine mounts and most everything else looks the same, the only thing that ive heard needs to happen is the radiator needs a thermo mounted on the front rather then the back (engine side). Ive got both a VH Commodore and a xt130 Corona so all the parts are easily sourced for a conversion. Please let me know if you've heard of this being done cause I'm sure it can happen, i just wanna know if the 202 motor and box will fit in without havin…
-
- 27 replies
- 65.8k views
-
-
Hi guys, I'm new to this forum, but i have a ke30, I'm planning to put a commodore 3.8 v6 on nos into it. i have been looking around on the forum a fair bit and i know what most of you think of them, I'm building this car for burnouts and just to have fun in, not to race around. There are a few things I'm having trouble with, and was wondering if any body could give me a few pointers on how th complete the conversion. i need help with things like engin mounts.
-
- 27 replies
- 9.7k views
-
-
ive recently bought a ke70 n lookin at engine conversions.. most popular one is 4age.. i also thort bout puttin a 6 in it for more power.. so commy v6 or toyota 6.. which wuld be easiest n cheapest... thanks :)
-
-
- 27 replies
- 54.3k views
- 1 follower
-
-
Hi everyone, I'm in the progress of getting the engine into the AE71 corolla, but so far the problem is the engine cross memeber. The 1jz engine sump just right in the way and blocking the steering rack. Friend of mine sent me this photo a while ago, does anyone know this car? number plate XVL247 If you know this guy could you please intro to me? PM me Because I want to find out how he did it, I'm in the hurry to sort out this engine conversion problem at the moment, PLEASE HELP ME >__< or If anyone else knows how to fit a 1jz into the AE71, could you please help me? many thanks Henry
-
- 27 replies
- 23.5k views
- 1 follower
-
-
Hey guys I'm a new member..I have a ke35 corolla and just bought a sr 20 to go in does anyone known the estimated engine conversion cost and anyone that could do it in brisbane??????
-
- 26 replies
- 7.9k views
-
-
hey i just got a 3t today with a t55 box for $300 its got everything for the engine. i just want to know what to do next...? like where to put the mounts? do i need a new Xmember what upgras need to be done? etc.. i'm in the act so if any1 has anything to make it easyer or to help out thanks
-
- 26 replies
- 11.1k views
-
-
hey thanks alot for your input ppls on my last thread about a 4age engine, I'm more keen on a vn v6, because they go pretty well for what they are, an i want something thats going to be just wrong on the raod LOL, anyone done the conversion vn v6 ??? an what problems u reckon i might run into, thanks heaps everyone i really keen to start this project too, will be posting adds along the way to help more people convert this engine ?? any advice will be much helpful thanks
-
- 26 replies
- 14.1k views
-
-
hey just wondering if an rb30e will fit into a ke36 without modding the firewall? cheers Matt.
-
- 26 replies
- 12.2k views
-
-
will this engine fit in my corolla? its a 81 te72, and i need some info on this engine, it sounds like it would be sweet to drop in my car, also I'm in america, and i heard this was a JDM or euro motor also? thanks!:D
-
- 26 replies
- 20.7k views
-
-
Hi Guys - i have decided on 4AGE to the KE55 - but is getting hard to find good cond RWD 4AGE motor's now. How hard is it to make a FWD 4AGE into a RWD?! i realise mounts need changing etc.. but what else??! can it be done and is it cheaper / easier? (lol!) OR if not, does anyone know where i can get my hands on a RWD 4AGE 20v? (black top would be prefered!) Thanks heaps Guys and Gals!
-
- 26 replies
- 114.2k views
-
-
ive just started doign my ke30 striped him down no rust stragth as i just don't know what engine to put in it , i was thinking 13b or maybe v6 any ideas
-
- 26 replies
- 8.4k views
-
-
Hey, I'm looking to up the power in my AE92 GTi. I've thought about 4agze but I'm also thinking of something more 'out there'. I was wondering if anyone had done a conversion to a V6? Or if anyone knows if mounts line up for any v6 blocks? Thanks,
-
- 26 replies
- 29.8k views
-
-
is it possible to buy a wiring kit or full conversion kit for my v6 into a ke70
-
-
- 26 replies
- 109.3k views
-