Rollaclub Rides

HELLO TO ALL , AM A NEW MEMBER AND JUST WANTED TO SAY HI.........LOOKING FOR A TA22 TO DO AGAIN.....AND JUST WANTED TO OFFER.... ANY ONE AND EVERY ONE ..... FREE ADVICE ANY TIME AS A ENGINE BUILDER / TURBO / SUPERCHARGED / NA FOR THE LAST 30 YEARS............AND JUST A FEW PICS OF MY CARS ...AND CARS I HAVE MOD ...............can't WAIT TO DO A OLD TOYOTA AGAIN..........IF ANY ONE HAS ONE FOR SALE,TA22 .....OR JUST WANTS TO KNOW ANY THING RE ENGINE MODS OR JUST GENERAL MECHANICAL QUESTIONS ,I WILL ONLY BE TO GLAD TO PASS ON MY MANY YEARS OF EXPIRIENCE.....FOR FREE...PH0412178874....ANY QUESTIONS RE TURBO OR SUPERCHARGING MY SPECIALTY

finally got me hot little hands on a ke11 6/70 ami built model. I don't know a great deal about these cars, but this was a good score, and ive always wanted one. Starter motor is shagged so i have replaced it the sarvo and got her running. it has a warm 3k with k40 4 spd and jap diff. Has had front brakes upgraded and been told its ke 20 hubs and rotors with ke35 discs. rear has reset king spring leafs. still retains ke10 front leaf interior seems pretty straight forward and original with ke20 seats in the front and everything else stock. door cards and parcel shelf have been cut out for speakers:( at the moment it runs well but will need a bit of mecha…

hey lads heres my project, bought for a measly amount off a mate who had it garaged for 5years, i had sold my last perfect 35 and wanted another that i could molest a little instead of keeping it bog standard. The car was bought with a dinted drivers door, boot and car full of useless shit, zero rust and no motor or box, plus a whinging diff. I played around with it for a while, picked up a ke36 pano with a 3tgte, t50 and ford 9" and slotted the motor and box in, hated the whole setup and how it was done, and what was needed to be done, when a 5k would have been much more easier for rego and time and cost. picked up a cheap ke70 with a good compression5…

Howdy All, Been on the forums for a while but never actually did a rides thread i don't think :D This is my first corolla, ive also owned another AE95R (parts) and a AE71 as a work car, till i killed it :dance: I bought this off of these forums back in July 2008; original build thread < http://www.rollaclub.com/board/index.php?showtopic=14705 > When i got the car it had unfortunately been in a small prang as seen here < http://www.rollaclub.com/board/index.php?showtopic=21841 > Over the past 13months my father and i have been slowly doing bits and pieces to her. It only took me a weekend to fix all the damage to the car, had it ba…

Thought it was about time I put up a project thread. Since selling my ke11 I've felt the need to get some work done on my ke10 project. But seeing as I live 70kms from it and never get time to do anything on it i figured Id show you all where I'm up too... I Found this on the side of the road on the way home one night, it was getting ready to be loaded and taken to the crusher. So when the truck came to pick it up, i got it directed to my house instead. For a small fee. heres the specs: 1969 ke10-b white 4k with original 4 speed 95% complete. Rusty, but most contained to permanent panels. Unmodified And here's how it looked the day i got it:…

hey fellow rollaclubbers ive also got this posted in the engine conversion section but its worth a mention in here aswel. SUS020 THE BUILD please take the time to check out the link to my Toymods thread. i can gaurentee you will not be dissapionted and all feedback is welcome. for those that want to know what your missing out on if you want more just have a suss of the link ;) cheers scott

Hey all. I like to consider myself a ke10 through ke18 type of guy (hence the username), but I am a Corolla Freak like the rest of you so this could not be missed Picked up this beauty just last week. Purchased 9th or October 1974 by (now 85 year old) Davinne from Cambridge Motors, Hawthorn. She was the Only owner... Until now. This is the closest thing I'll even own to 'overrated'. Came with Original owners manual and Vehical Warranty books. Even has the original Toolkit in the boot which has never been used. The back seat has been sat in 6 times! Everything is original except for the steering wheel cover I removed before leaving her driveway. …

hows it goin. heres my old rolla witch now is fukooted after i rolled it on my brother's track ;) but the same day me n my mate got a new beast :yes: 84 ke70 5spd fair overrated exept one bit of rust on the right rear wheel arch n thats it. the interior is overrated n 280xxx ks. got it for 500 buks. but only to get 14k's away from where we bought it to find the temp. guage don't work n that we cooked it :n: ( 46 degrease in the sun ). all cuz the bloke was to fukn worried if he had told us there was a leak in tha radiator that we wouldnt buy it!!!!!!!!!!! now he's gunna pay to fix it hahaha.

hey thought id post this here i had it on ae86dc but cbf on there. 1982 wagon 5speed stock 4kc cut stock springs (front) lowering blocks (rear) strut brace(ads like 15 kw at the right rear wheel arch) 13x7 advans mad 3" stainless drift pipe from diff back lol dildo shifter put my old tacho dash in cut down front bar. have t-18 rear bar but iv bin to lazy to make brackets so no bar on back atm evrthing else stock. plans are. engine conversion. not sure what. lock spacer more camber! overrated the interior out (rooted atm) and maybe respray thinking of like a creamy colour. and thats bout it cheers scott first photo is when i first got …

Hey everybody. This is my first thread! I couldn't help resist but tell everybody about the 1977 KE36 Wagon I just bought off a bloke in Victoria. I haven't actually got the car yet, BUT I'll be leaving Canberra to pick it hopefully in a week or two. :D I have BIG plans for the Rolla. I plan to put in a newer, stronger, better etc. motor, which I'll be discussing with everybody when I get to that stage; Will probably want to put in a 4AGZE or similar. It's going to be painted a cool color, that I haven't decided on yet. It is currently colored BA purple, with some orange stripes down the sides. I'll of course have to put some HUGE :jamie: 15-17" rims with fa…

Hi, actually I am restoring my ke55 coupe n searching for flares, front lip and boot lid spoiler. Can anyone help me out?

I finally got my sports seats fitted all legal with mod plate as well they are so comfy i hate getting out of them when i get to work pic will be posted on projects gallery soon :)

Hi People Just bought a 94 Seca RV AE102 totally stock, the reason that I named it Shakey is because it needs new engine mounts, so when you change gear you hear the engine go back and forth. Also it has the wrong clutch in it and when I'm pressing the clutch it shakes up and down. And also the stock AE102 suspension is shitty, so that's how I got Shakey So after the clutch and engine mounts are done, I can start modifying this beast. The Plans: - do the exhaust - find some corolla sportivo rims for it - do the suspension and lower it an inch or 2 - customize exterior, headlights, grill, mirrors - customize the interior - do a little sound …

So this is my second AE86. I picked it up as a rolling shell which was in pretty good condition. Recently I bought a bunch of stuff from buddyparts including: Bare JDM 86 halfcut, JDM 86 front brake setup, JDM 86 T series setup with 2way LSD (Probably swapping it for a standard LSD), kouki dash cluster, jdm fueltank. Car is running and was wired up by the boys at buddyparts. Body work starts next year. The first thing we need to do is figure out what to do with the disgusting "dealer" fitted sunroof. It's only got a little bit of rust but the car does need a respray. Once body work is done I think we may have to go through regency to get it legal but I am confident it s…

Hey guys and gals, I thought i would post up a couple of pics and some info about my car: Well i bought the car in 2001 and she was stock as a rock since then i have been through 3 motors countless amounts of driveshafts and a lot of blood sweat and tears! Engine Silvertop 20V Blacktop 20V ECU Drift oil catch can Anodized Blue Trumpets for Quads Uni Filter socks Suspension/Wheels Bazda Coilovers 15" Lenso Concept 5's Bridgstone Adrenalin 195/50/R15 Lucas Pads and slotted rotors (front) Standard Rear brakes Interior Momo Steering wheel Momo Crome gearknob OMP reclinable bucket seats ICE haha so lame :lolcry: Soundstream 7" in-dash …

So I bought this only because I have a f*ckton of tasty goodies lying around with nothing to put them in... Stay tuned :)

Already put the KE20 in the KExx thread but here she is again with my other toy :evil: Actually my second Rolla, my first car was a 1982 KE70 wagon, 5 speed, 4k, absolutely overrated and original, bright orange paint.. I loved that thing but it got a caning hehe KE20: Unmolested 1972, 3k, Toyoglide RX4: Genuine 1976 LA23S S5 13b, S5 gbox KnightSports highflow turbo, Turbosmart 38mm ext. gate+screamer pipe Microtech LTX8, custom front mount, custom zorst, gilmer, RX4 locker diff, S2 rx7 rear disc conversion, Magna front discs/Commodore calipers, brass button clutch+lightened flywheel, custom 1 piece tailshaft, surge tank with a pair of bosch 975s an…

hey all i think its about time i do some work on my 5k ;) did some looking around and this is what i found sofar?? my 5k is coming out and a 4k is being replaced ;) just wanna no what people think about the mods i wanna do to start it of: *reground cam (camteck 33-64/72-32 , 277/284 degrees 0.345'' valve lift) peek power 8000+RPM'S!!! *SHIM OIL pump for faster oil movement and a ford z9 oil filter!!! *change too solid lifter with 4k rocket gear!!! (datsun 1200 push rods) :lolcry: *maybe abit of head work panding price tho and new valves and harder valve springes!!! *balanceing the motor new piston rings!!! *electronic dizzy!!! * and i also wan…

Got me a poo-brown AE71. Story goes my mate Jonezee bought this off a Granny, got it defected, got lazy and sold it to me for $500 all canaried. Took a weeks worth of bringing it up to regency spec and it passed first shot, HYPED! All outta rego, I took it home, put it on jack stands and spent some money on it... Don't you just love the stock height... :teehee: So now, I await some parts and cash flow for rego but when everything comes together the spec list shall read: ## = On its way! Front End: - AE86 Struts - Cusco Strut Brace - KYB Excel G shocks - Rona XT130 LCA's - AE86 PS Arms - 7kg Springs ## - 40mm RCA's Back End: - KYB …

Hi all. This is my third foray into the world of engine building… Past experiences include 22r rebuild (was supposed to be the indestructible car… my sister rolled it doing 40kph. long story... engine still goes like a dream) and a 253 Vee-ate that was intended for a one tonner, but never made it as I couldn’t find a cab for the damn thing. This time around I am aiming some fairly unique ideas at my KE20, Sherridan. (Sherri for short…) I’ve had her for almost a year, and the stock as a rock 3K is feeling really really tired after racking up 280 thousand on the clock… Time for a makeover! The thoughts so far are as follows… 3K Block Rebuilt/Balanced (co…

Hey guys. This is my little '77 ke30 sedan daily drive - Shiro-Bōzu. The name is Japanese for a white spirit. I felt the name to be pretty fitting. I'm the second owner of the corolla, the first was an elderly lady who'd had it since new. The car came with every single service reciept including original purchase papers and only had 76xxx genuine k's on it at the time I purchased it in 2011. It currently has 91xxx on the clock. I also swapped in a low km 4k engine last year after the old faithful 3k decided to part ways with reliability. I got a little carried away, as we all do....and started modifying it with some basic mods. Probably not the smartest …

Just picked up this ke70 for cheap a few days ago, the motor in it is good runs really well but its a auto. the body has rust in the boot and around the fuel cap (its pretty bad). the interior is surprisingly clean Not really planning to go too nuts with this car, I'm just gonna lower it and paint it, and mabye some wheels. I bought it from Just Wrecking Toyotas on the cnr of South Tce and South Rd in Wingfield. The guy said it was lucky i called when i did because the car was about 10 minutes away from being completely wrecked, the guys had allready gone out and marked all the parts with a texta which i now have to clean off, lol.

New thread. Car looks like this now. So I put an AE93 speedo into my KE70 cluster for the speed sensor mainly to get rid of the CEL. Turns out when I drilled into it to mount it I drilled through the speed sensor connection. D'oh. Fixed, improved and re-installed. The clock has been replaced with a voltmeter and the charge light is no my CEL. I removed the trip meter mechanism to fit the speedo but I think I could make it fit. If I can find another cheap 93 cluster Ill do it at a later stage along with a new perspex screen. Next plan is to install the 9000rpm tacho.

Hey all! I picked up a really decent RT40 corona last week... Haven't cleaned it yet but check it out! The trusty 2R and toyoglide have travelled just 38000 miles from new, it has no rust at all, amazing chrome (no dents whatsoever), very very good trim, door trims and seats are in great nick, carpet is good except a little worn where your spare foot sits, dash and steering wheel are fantastic, dash pad has a crack though, body is very straight, just has small dent on the top of the LH rear quarter (1/3 of the size of an egg) and unfortunately has a bit of a scrape on the LH side also (damn old people), it has the original service book and owners manual still in plastic …

4agze Supercharged exhuast,extractors ,celica gearbox, celica diff , candy apple red with airbrush GTI bucket seats retrimmed interior custom rear lights 17inch chromies lowered. And its actually 4 sale so if u r intrested let me no its fully engineered located in sydney

show your retro :) enjoy,cheers.

Hey All Managed to get my Car Enthusiastic Hands on a 1976 Ke36 Station Wagon, many thanks to my mate Cords. Simple plan really, create a sexy Ke Daily Driver, giving my 180sx a rest from its current 60km roundtrip. ill upload some pics soon too fill you all in on my current progress.. Angus

Here i have my 1983 ke70 project. it has a stock 5k 5 speed manual, only 40xxx km on the engine well looked after and 173xxx km on chassis. going to slowly repaint it white but I'm not gonna take it off the road whilst partially restoring the outside. it had minor rust which was cut out and plated. i have ae86 front struts and brakes coming for it soon hopefully. here are some photos. tell me what you guys think and if u have any advice feel free to let me know. =]

Hi Guys though it might be about time I made one of these threads! Car: 1980 ke55e (square head light front) Colour: Baby shit brown Interior: S13 front seats, sports steerer, tach, boost and oil pressure guages, kenwood deck and 4x 6"s, skull gear nob I can't get off!!!! :) Exterior: Currently 13 x 7 hotwires, 185's and 205's, earlier model ke55 bumper, character adding dents and rust patches!! Engine: Stock internal 4k, Camtecch 609 lump stick, VN Radiator. Induction: TD04-L turbo (off late model WRX) '89 mx6 front mount cooler, 32/32 DTMR-A weber in custom air box ;) Fuel system: Malpassi R/R FPR, VL Turbo fuel pump, small lift pump. No surge …

With the need of something more practical (carting the kid's bikes around mainly) I decided to get myself a new daily. Always wanted one of these since I saw them in NZ about 12 years ago. Been keeping an eye out on Gumtree etc and one popped up recently close to me. 1998 ST215. Manual.... Yes it's actually a manual!! About 200k km but still in really good condition. Couple of mods - HKS exhaust, HKS turbo timer (pre import mods), auto metre boost guage, Turbosmart BOV (which sounds a bit loose and fluffy for my liking) and genuine TRD front bumper. Which to be honest I don't really like that much. There's one little part of it that makes me think it looks like the …

so ive been round here for a few years chucking my 2c in every now and then, so i thought i should finally post up a build thread for one of my cars, a 2dr ke70 van now sporting a sr20det was 4k when i got it... soon became 4kturbo with vf10 and suckthro SU, learnt the lesson about rubber seals in turbos and fuel LOL next it went to vf10 blow through SU, front mount vr4 cooler etc then it went to 5k (O dish) with vf10, SU at first then started playing with blow throu asain carb then rebuild it with molly rings, ported head, 272degree cam etc blew ALOT of diffs and axels and about 8 g/boxes, ended up with hilux 1420mm rear end(standard 1400) and a t40 box, this motor …

This is my project throughout time and eternity itself. focus is boring, so i gotta have something to keep me occupied. Bought the car in 2005 as an auto from my grandfathers estate, and it was one of my first cars. Auto + 4k makes for a very dull car so with the help of a few mates from pulse motorsports car club, we converted it to manual and it was a good learning experience. A couple of the bits i bought didnt match up as they were from a ke55, so another ke70 shitta was bought for 100 bucks. still didnt have the clutch spacer for the firewall though..so the solution was to weld a 22mm socket to the firewall..dodgy..but does the job just the same. Ive been slo…

Althoug not a Corolla but still a Toyota............... Bought not to long ago after some low life stole my car. I use to have a 1979 accord sedan!! This car was an absolute rust bucket and needed a lot of TLC but it started everyday!!! But some one stole it and wrecked it. I found her back on its side in a ditch totaly wrecked. They might have tried to exceed 70 km/h but with out shockies a car gets a bit waivery.... Any way we replaced her for the Sillyca!! We love it. We are 3rd owner and both former owners have baby-ed her very well. All is original and everything works perfect. We might have to change the front shockies as the car looses grip when cruizing above…

My new barn find, the humpback. My brother mentioned a while back he'd be interested in the 'rolla thing. He'd saved up some money, so I said I'd keep my eyes peeled. That's where the trouble began. I was surfing all the usual car sites and I found the fidy. It's a little tired, drives well two owner machine. It's had a g'box rebuild, callipers, starter and alternator done. My brother is now buying my '35 Plans are to employ some of uncle shadies patented crap remover, fix up the little bits of rust,cut and polish, regas the a/c, get it regoed and then start messing with it. I think , maybe lower with my wagon rims widened and whitewalls. I love UGLY!

Hi guys Due to a recent change in job, I lost my company car and decided an old school Corolla was going to be the go for my daily transport. After looking at quite a few on ebay and in person, I noticed someone's advice in the wanted posts suggesting Peter Robinson was the man to see... I trundled up there this afternoon and had a chat and am now the proud owner (to be) of this great little car...I will pick it up next week once Peter has got a roadworthy for me. Specs are all very much one owner granny spec.. K motor, toyoglide 2 speed auto, 4 wheel drums, neat white/cream interior. Immediate projects: Get roadworthy from Peter Repair single tear in d…

Time has come to create a thread on my baby, affectionately known as "Project Celica". Figured I better show I still have a Toyota in the garage since I will be still floating around rollaclub! I will try and distill the thread from toymods that I have been running on it since July 2007 into something that will make sense here. Hopefully its not too much of a mishmash! I acquired this couple of owner silver ra23 from a fellow Toymodder back in October 2005 in Sydney Australia. After a good service I drove her home the 1000km to Melbourne - the alternator failed in the last 100km and we only just made it in to the drive way, but we did make it. I bought her to …

When I was 17, I bought this as my first car. Paid $600 for it from a mate, spent alot of time and money getting her roadworthy and it was my daily for just over a year until I snapped a valve spring. I replaced the offending spring, but in the process, I discovered that the entire engine is full of crap. No idea how it was still running. It lasted a couple weeks after that until I snapped another spring. Couldn't find a full set of springs at any wreckers so I gave up and parked her in a shed. Engine still starts and it can be driven on and off of a trailer, but I really don't think the engine is worth saving. Running stock 1.5L 2R with 4speed. Drums all round needi…

Hi everyone, here are some pics of my AE112r this is the most recent photo i have. the day i brought her home. Very neat and tidy. This is how it looked for a while, i'm in the process of making the cutout grille again. After a wash at home, probably one of the last photos where the paint was still nice. My clear coat has since decided it no longer like my paint and they're going their separate ways. will post some more pics soon, let me know what you think. i'll also update with a list of the mods i've made. Simon.

Hey all. i used to have sprinters years ago... had 3 of them in fact, Got a lot of love for the toyota's but i went down the nissan path and got into drift. Currently have a pretty worked R32 4 door with RB25, 280 rwkw and a host of other goodies. Vids of that if your interested can be seen HERE While i had the 32 i had a daily AE92 which i had for 3 years... it had a huge amount of kms on it, dents in every panel and in general looked like shit but it was the most reliable daily i ever had... til one day some bitch with NO licence, lost control of her car and wrote mine off. So i bought a KE70... always wanted another rwd cheap toyota but didnt want to fork out ae86…

My sister has had this car for ages but recently she got a paint job. She's getting new wheels soon as well which will suit the paint.