Rollaclub Rides

Hi every one i have finally got a ke30 for a project car :P :) It was my dads old runnabout which i thought was in worse condition than what it was anyway heres a couple of pics as it is now and the only damage on the car Thanks

Here is my new road car :lolcry: Seeings Butty put his coz on... I think mine is better one to talk about :yes:

Hi, jimmy from tassie, Got a bit of a project running, but it only turned serious the other day, when i picked up my first rolla; Not sure what year, or model it is, but i paid $300 and a carton of beer for it, (it was a $2000 trade in, but for $300 i had to remove it before the day ended) 176,000 on the dial, 3 speed auto :hmm: New tires, New carbie, Lots of little things done Little bit of rear quarter rust, rest is rust free Tinted windows Borg wanna be diff Spotless inside, with no cracks on the dash, and or rips on the seats 8 months rego Motor is a ca18det, sitting on a stand Hosting pics now Posting as soon as there ready. Ove…

Hey guys and gals heres my finished project (for build up see http://www.rollaclub.com/board/index.php?showtopic=3607) painted, rimmed, and loud... painted in the taxi orange (didnt know untill it was applied :( ) with its new Melber alloy 15" rims and low profile tires it doesnt look too bad. It has a 4k with a upgrade camshaft (unknowen) holley carb with new rings and all tuned up, with a 2.5" system with tuned extractors and a 4" tip :P Very Loud ;) Has new carpet and NOS front seat covers (just wanted blue) witha custom back one made up. Custom parcel shelf and custom door pods give my stereo a personal touch consisting of a Pioneer DEH-P4750MP H…

Hi all, James from Ireland here. First, my Rx30 (with my AE86) stuff I've bought for it: Keihin FCR carbs brand new front brake discs front and rear brake lines rear drums rear brake shoes rear cylinders original MX41 wing mirrors stuff on the way: front splitter Toyota reconditioning kits for brake calipers and brake master cylinder Toyota brake pads All Toyota rubber bushings underneath New Falken tyres (big stretch when they go on) Spacers front and rear Front struts converted to coilover with short stroke shocks Rear custom lowering springs and short stroke shocks Its booked in for rust repair and exterio…

Well i have had this AE71 Since january 2006 and not alot has happened with it. It was bought for me to use in motorkhana's and khanacross's. Bought it with a rooted diff and a complete auto ae71 with it for the use of its diff. So in the time i have had them i have...Changed diffs over, stripped the parts car for useful pieces and sent it off to rolla heaven, Stripped un needed interior bits out of it to make it uber lightweight, sound deadener removed. I have also made a sidepipe out of the spare stock exhaust pipe. Sounds beefy but has a nasty back off sound above 4,500RPM. Wants some back pressure. I acquired a 4age requiring a rebuild (cost me a few parts off my …

Hey guys, its been a while since last on. Been doin stuff. Still working on my ke25 . i got an airbrush 2 weeks ago and thought i'd give it a wirl. Self tought, its amazing the stuff you can learn off you tube.. I did this today, took about 3 hrs to paint. Anyone willing to sacrafice there bonnet or car for the cause :dance: pm, i'm on the gold coast.Could do this or somthing like it for about $300.00.

this is my 71 KE25 which i picked up for $200 from a guy at work. I bought it because i drive and hour in peak hour traffic each way to work and didnt wanna prang my ute. Specs: Name: Boris (car) Engine:KE70 4K, 1290cc of Toyota GRUNT Trans: K50 5spd out of a KE70 Diff: Stock jap diff, unsure of ratio 3.9 i think :o Suspension: slightly lowered front and rear, std struts. Brakes: (f) KE30 discs and calipers, ® std brum brakes. Wheels&tyres: Rt104 Corona wheels re drilled to suit 110pcd.(f) Hankook 185/50/14 ( r) REEEALLY old bridgestones Interior: KE25 sports steerign wheel, (f) Retrimmed stock buckets ® stock bench seat with chea…

Deleted

After Selling my orange KE55 (stupid stupid me) i had been wanting to get myself anouther rolla for a bit of a project car. Mostly i wanted one so that i could have a go of building a tuff cammed motor by myself. Well I managed to get a 4K off the forum for $50 with a Ke70 4 Speed so all i needed was a shell to jam it into to get it running. Meanwhile one of the boys at work had bought a rusty Ke55 for a run around, in between decent cars, it got sold to one of the other workmates and now i have it. It has got so much rust over the rear wheel arches that i don't know what to do. Its a nasty yellow colour but it is running and it has a 5 speed (although it do…

What would you do with it?? I do not want to swap engines etc.........Its still for sale but if it doesnt sell soon I want to do it up. I am thinking of lowering it and put bigger wheels on it. What wheel might fit? With white walls of course. I love them!! I do not want to change to much as it is quite a rare car and I hate F&*%$ cars. I am thinking of putting a peroid right roof rack on top with an old long board or so Give me some ideas please............... Cheers Marjanne

hey everyone. This is my AE71 project so far. It will be running in the next week or so. your comments and suggestions please. there is some nasty rust to fix in the rearmost pillars and behind the rear wheels, then it will be repainted in white. other things i want to do are - make the interior black re cover door cards in black paint dash black - Limited slip diff updated pics soon stay posted :) cheers. Mark

Hi all, Here is my new daily. It's a 1973 ke20 SE 3k, 4 speed. :D I have had it for over a year now, and was sitting in my backyard parlty stripped, until I decided to put it back together and get it on the road again. :) I am selling my toyota supra ma70 and so I needed another car. :y: ;) So here it is.

hey guys and girls its time i share my corolla with its fellow folowers! details. it is a 1974 ke20, it is toyota be86 bright metallic blue. it cost me $2200 which was deer considering i hadnt even finished paying off my escort panevan before i wrote that off. when i got it it had a locked diff with a 3k and stockies so i blew that diff in no time. that was the past! i have done all the work i was able to myself with much help from my amazing mother. now it has : >5k >32/36 weber >extractors through 2inch to an exhaust dynamics 2 inch muffler >stage 2 cam >lowered stiffened leaf sprins with heavy duty gas shokers >5 speed k50 &g…

Name: Jordan Car: 1983 Ke70 Sedan, Flat front, one of the last flat fronts :(. Motor & Driveline: Stockkk! Suspension & Brakes: Stockkk! Wheels & Tyres: Stockkk! Interior: Stockkk! But immaculate! :y: Body: A few dints on the bonnet, Absolutly no rust at all! :y: Other: This is what I'm Throwing in it, :) Engine: Specs: Bigport 7 Rib Bottom End Small Port Head, Shaved a tad for slightly higher compression) Fully Ported and Polished, Valves Re Lapped HKS Valve Springs Wade 800A Cams (253 at 40 thou) Techno Toy Tuning Adjustable Camgears Techno Toy Tuning Velocity Stacks Techno Toy Tuning ITB Manifold Adaptor Silvertop…

Had a spare few hours today, got Aarons shovel70 and turned it into a pancake70. Included in that time was the making of the twin headlights.

My AE71 This is my car, Just a typical AE71 with a thrashed 4AC, 5 Speed, Noisy Diff, 17" wheels etc. It needed more power so i took it to my mate Nick (NickZ) doesnt take him long for a engine change. Started saturday at 3:30 engine out in no time and new engine in by 5:15. Had it wired and firing by sunday afternoon. Just have to fit the EFI pump, radiator and weld the flange on the collector on the extractors that Nick made. 4AC to 4AGE Hmmmmm Nick Loves wiring.

G’day All, Perhaps you fine people can help me. I am the owner of a 1991 GTi 4AGE (100kw). In fact I have owned it since new (yes, I’m that old!) It was my first car and is still used on a semi-regular basis. However, with 250,000 klms on the clock she is getting a little tired and frayed around the edges. We investigated getting another second car and putting the GTi out to pasture (we are NEVER going to sell her, too many memories). We have rejected that idea as there is little in today’s small car market (Feista, Yaris, Polo, etc) that would match or even come close the GTi in performance. So we have decided that the GTi will get a complete over…

Hi all. This is my third foray into the world of engine building… Past experiences include 22r rebuild (was supposed to be the indestructible car… my sister rolled it doing 40kph. long story... engine still goes like a dream) and a 253 Vee-ate that was intended for a one tonner, but never made it as I couldn’t find a cab for the damn thing. This time around I am aiming some fairly unique ideas at my KE20, Sherridan. (Sherri for short…) I’ve had her for almost a year, and the stock as a rock 3K is feeling really really tired after racking up 280 thousand on the clock… Time for a makeover! The thoughts so far are as follows… 3K Block Rebuilt/Balanced (co…

okay. so basically i ended up with this car because dad grabbed it up for his own use when his motor bike was stolen. then basically i bought it off him because he no longer had a use for it and i figured it was a good first car. when we got the car it looked pretty bad. the passenger side front quarter was black from when the previous owner ran into a pole and had to have it replaced. so we got out the old spray can and silvered it so that it wasnt as bad of an eye sore. so this is basically what it looked like before. and from that point basically there was alot that needed to be done. we got a new bonnet as the one on it was sort of caved in and all. and we de…

hi every one this is my 79 corolla coupe it had 150,000 k on the clock original it has all the books from factory i brought it basically stock 4 speed 4k motor interior imaculate i have since put a 5 k motor as i already blew 2 motors up 3rd time lucky 4 speed manual alarm central locking ke70 console chrome bumbers tinted windows old skool dragway splats i also have rola 01 number plates soon to come is extractors and new paint job same colour and keeping original stripe also ke70 boot release so what do you all think cheers kylie

Hi All, Haven't been on for a while as i was driving an SV21 camry wagon, but screw that i thought yesterday morning.... Jumped on the net and look what popped up.... Got it for $1,100 Advertised the camry at 12, sold it at 6, pickin up the KE70 tonight! The good: 4K 5 speed New radiator and brake master cylinder No serious rust or dents, a bit of surface rust on the panel creases though 232k kms but it's been pretty well looked after - female owners CD with 6X9's Tinted windows in very good nick Bumpers are straight and not warped Interior is pretty damn clean apart from tear in drivers seat The Bad: The interior is blue. All of it. Ever…

As you might have guessed from the title I have another AE71 now. For those who don't know, deemed my other AE71 too rusty to be worthwhile registering, you can find it here: http://www.rollaclub.com/board/index.php?showtopic=17235 I bought my new one about a week ago now. Its very similar to my other one (another AE71 duh) but its got a few differences. 1. Its auto :hmm: 2. Its slightly a different color silver-green as opposed to silver on the other. 3. Its only done 158,000k's. 4. Its currently registered until June. 5. Windows are tinted. Most importantly though, its got A LOT less rust. Now for some photos, these were taken on the day I went to see it:…

hey all names haydo this is my latest ride, bought it threw here you probably seen it up for sale but i was quick to grab it hah, since i bought it iv installed vanetian blinds, old grandpa front seat covers, nana picnic blanket on back seat, lowered the back just flipped 2 leafs, iv got super lows for the front but havnt put them in yet as I'm waiting on gettin front leaf springs so it will go low enuff, you no what i mean, iv got noice shiny 3 inch exaust tip an new muffler put on for a some sound, iv also bought brand new tyres all round and I'm waiting till the fronts lowered till i get my white walls as it will be abit of a cop magnet at the moment i fi…

Hey guys, bought this last week off my mate who purchased it off the original owner two months ago. Technically it is a three owner then but oh well :hmm: The grandpa was buying a new Corolla and was gonna use this as trade in, but they only offered him $300. so my mate made an offer and subsequently bought it. Its a 1974 KE20 SE Corolla, the luxo pack hehe. Has an 'awesome' Sanyo am radio/cassette player with Sanyo speakers in the rear trims. Has 67,000km on the clock. Stock 3k, 4 speed, runs well now. Interior is near immaculate minus torn drivers seat, and a crack in the dash pad, and torn gear boot. Has all tools including little case in great conditi…

here is my new ke55 i have put a deposit on and going to pick up this weekend, will get better pics on the weekend when i can take them!

hey guys, i thought it was about time i told you all about my car, it is my first road car (i have had a few parts cars and one for khana) its a '79 ke55 hardtop. i have had it for about 12 months and in that time its received a PHAT 2" zorst with one muffler so its reasonably loud, its got ta23 celica struts and brakes so it stops... yay and its also got some 13x6.5 spitfires. The plans for it in the "near" future are a plained bigport 3k head(should be next week and lowering. in the not so neer future (hopefully mid next year) it will be getting a 2tze, the engine will consist of a mildly modifyed 2tc with efi off a 2tg and a sc12 of a 4agze, all this will be trans…

Hey guys, just registered and thought I'd share some photos of my new '80 TE72 let me know what you think my old '95 Tercel and my new '80 Rolla side by side I'm planning on painting a couple things until I can afford anything else (engine, exhaust headers, carburetor, calipers/drums and all the black trim to start) comments/suggestions appreciated

Hey all, After deciding to get stuck into rebuilding Sherridan, the KE20, I went looking for an engine to freshen up. I found a 4K from a liteace in the Quokka and went to have a look... turns out the guy selling had a 1989 T-18 for sale too... seeing as my budget was fairly limited, i didn't bother asking the price he was after. From what i remembered, getting one cheap with as many parts as he had just wasn't a possibility. Anyways, after deciding that the 4K had too much water in the block, we were about to bid him 'farewell, but no thanks' when my girlfriend, Jo, recommended asking what he wanted for the TE... Turns out $600 is good for a car with 5 mont…

hey all, my name is tim this is my ke26 wagon, its powered by a 3T with twin solex carbs, a set of headers and straight through exhaust. its backed by a five speed and a locked TA22 celica diff. its was an ex rally car and I'm fixing it up so i can do a few hill climb events and just race it around! give me some ideas if you want to!

Hey everyone, i'm new to this forum so i'm sorry if this topic has been discussed before I was just recently given a 1976 Corolla that I believe may be a TE31 because of the VIN number, my guess is that it's the TE31? correct me if i'm wrong, because i'd really like to know. Anyways, there's absolutely nothing in the car, it's really just a rolling chassis. I was wondering where I may find parts to restore the car as well as upgrades to the suspension like coilovers, sway bars, etc I'm intending to put an N/A L28 engine from an 83 280zx which is about to get an engine swapped for itself, tell me what you guys think Here's some pictures of the car:

hey all. you've probably seen my topics asking for interior parts, engine stuff and other random shit. well this is the corolla i got in mid december and trying hardest to get it roadworthied. yes i still got a fair bit to go but its actually startin to look okay. its gunna be a 2 seater mod plated ae71 . atm I'm trying to get prices (gota get the cash first though so no real rush in finding one yet) fora 4age and wiring, wont be regod til thats done lol. if anyone knows of any around gold coast let me know lol. I'm a apprentice mechanic and dad owns the business so i ll definetly get this project completed. thats if it all goes well. lol. anyways the car has a very …

Yo starting to get my shit together with my rolla. Its a first time re-build for me so bere with me. I am thinking 4age or rotor. Any suggestions would be a help. James heres a few pics of the car as i got it and progress of the body work

1980 Toyota Corolla KE55 4 Door Sedan (White) Cooling System: VN-VR V8 3 core Radiator, 10" electric fan (on relay & switch), short-type kingswood water pump. Engine: V8 308ci Holden VK Commodore Black Block (stock and recoed). Exhaust: Genie Extractors (slightly modified to fit in corolla engine bay, 2.25" pipe midway to two GEN III VY Commodore Mufflers. Transmission: V8 Commodore Tri-matic and stock converter, Nissan Auto Cooler. Tailshaft: V8 Kingswood Ute Single-piece tailshaft shortened to fit corolla. Differential: V8 Commodore Salisbury Limitted Slip Diff 2.6:1 Ratio (Disc-to-Disc) and shortened housing to fit corolla, VZ Commodore one-tonner axles s…

Hay boys and girs I'm new to this club and have a difficult question to ask of you. what colour and style should i go with on me beautifull ke55. keep in mind that its a 4-door and has ke30 door skins, the ones that leave the top of the door exposed to match the colour of the body. don't lough but when i first got it i did it in tool box bluefor $43.50. i thought it was a bargen at the time but didnt think it would be so hard to strip in the end but its all good now the car was taken back to bear steel, dents were filled, the war on rust was victorious and all panels were made flush. only took me and my mate Gilly, Oh about 5 months :dance:. So what are your opi…

my ke70 i just bought it has a 86kw 4age engine

Will be fitting this soon to get some extra oooomph.

Azza's AE71 4AGZE supercharged, intercooler, 75mm exhaust all the way, rollcage, racing seat, watanabe's

Yes, I've finally pulled my finger out, and Bluey is on the hoist at Chateau de Wayno's. It rolled in at 1400hrs yesterday, and work started half a stubbie later. Engine and box are out, interior out, body deadener out (mostly), and a certain amount of body ugliness found. New front left guard and valence panel sourced (thanks Fook!). If people want I'll post progress pics as we go. Here's a couple to get started..... Engine out, average front end.....