Rollaclub Rides
Got a ride you want to show off? This is the place to post them.
2852 topics in this forum
-
this is just a little question iv been wanted answered for some time. what is the BHP differance in a 3K to a 4K? what minor things could you do to make it reach a stock 45Kw/60BHP 4K output? :hmm:.
-
- 1 reply
- 1.9k views
-
-
-
This is my project ae71 it has a 4ac carby engine it will be coming out and ive just bought myself a complete car wich is a ke70 it has all the running gear 4agze engine t50 box and exhuast all the way frew with a vl turbo fuel pimp surge tank etc... i will be swappin it into my ae71 that ive got enjoy
-
- 14 replies
- 3.5k views
-
-
I got my self an immaculate ke30 recently, absolutely rapt with it, now i just gotta get it registered. The engine bay was plastered with grease and crap when i got it, 3 cans of degreaser later......
-
- 22 replies
- 12.5k views
-
-
Just picked this up for a daily crapper while I rebuild my sedan. My 4th KE70 (first slant front) and my 15th corolla... :lol: $700, 4K, 5speed, Air con, apparently has a new heavy duty clutch. Its red :hmm: Done 338k kms, floats like a boat so new shockers will be on the cards. Motor is nice and quiet, no smoke and goes as a 4K should. Paint is pretty good, rust is easily fixed but needs doing before it rains, pics to come as it gets fixed... Interior is pale blue and not too bad mostly Towbar, 5 speed and a/c sealed the deal for me as that was what i wanted Plan is to clean it up over a few weeks then use it while my white sedan is put into retiremen…
-
- 7 replies
- 2.8k views
-
-
Hi guys I have a nice little KE26 panelvan (no windows). Its a complete car from first owner. Runs very wel. I have replaced al water hoses,plugs leads etc. I really love this little bleu panelvan but will start a new project soon. So as soon as my new project arives this blue one has to go. It is not registered or so and has no front breaks. The original spare is never used and it has 66.000km on the clock. There is only one little rusty hole in the front mud gard. I do not have photo's on the net as my computer is 124 years old and I am on dail up. What would this car be worth?? I am on Brisbane south side.
-
- 9 replies
- 2.5k views
-
-
Hi I have been thinking quite some time and have read all your reply's regarding the value of my KE26 panelvan. The panelvan will be on ebay soon and in the classified on this website. I have to many toys and this one has to go!! Thanks Marjanne Although no Corolla I still have the celica!!!
-
- 0 replies
- 1.4k views
-
-
Hey guys, thought i should share with you my boxie corolla that i have.... been checking out stuff on the forums for awhile now, contemplating on what to do and so on, and i recon I'm getting closer to a decision... My boxie is a 1973 model... i got it from the son of an old lady that could not drive any more due to age and her sight... the car is baby blue and when i got it had 84k on the clock... Minter.... being old though, she tended to like scrapping the front guards on her garage walls, but other than that, nothing wrong.... I have got new fenders, also new light surrounds, and bumpers for it, which i havent put on yet.. the plan was jsut to get it back to original,…
-
- 6 replies
- 3.4k views
-
-
I found this old girl a few months ago but had troubles getting onto the owner. My other car, a RN85 Hilux with a 1JZ-GTE, has been giving me a lot of dramas this year, so there was always a little thought in the back of my mind about getting a reliable daily. I found this purely by accident as it wasn't advertised. It was sitting under some carports at work collecting dust and hadn't moved for ages when I parked next to it and noticed the for sale sign in the window. It's a KE35 Corolla coupe, 3K motor with a 4 speed manual and only 122000kms. It's currently unregistered but only needs a battery and 5 new tyres. The engine sounds great and has no oil leaks. The body is…
-
- 32 replies
- 20.8k views
-
-
hey i got it for $250 got a few plans new gearbox ,respray and then ill drop it and get rims heres a few shots but the car hasnt been washed in a while so bare with me
-
- 28 replies
- 8.7k views
-
-
some time last year i bought an 1986 ae82 4 $650 :hmm: wen i got it the paint was old and sus so i got it resprayed (white) looks nice now, will be better 1ce i paint that blue bit black tho haha unfortunatly its a 4ac not 4age but oh well still goes good... specially with the new exaust :hmm: anyway here are some pics of the beast new exaust old exaust :D hope 2 get some new rims soon and the ones thats are in the pic are now painted black with polished lip :) oh and the lil spoiler is painted black now and i have a nice big kenwood sticker on the back window :D
-
- 2 replies
- 2.3k views
-
-
Hello all i have finally got some pics of my work in progress , about february the 3K in my KE25 had just about had enough So i got myself a 16V 4AGE with T50 , it was all setup for RWD (plenum , thermostat , etc) and ripped out the 3K and got to work . First up me and my Dad put the engine in its place with the AE71 mounts that it came with , no go , the mounts were too wide for the brackets on the x-member so we had to get started on making up some custom ones these are the mounts the me & Dad came up with , made from 6mm steel plate . we used MDF board to get the shape of the mount pieces and used them as a template on the 6mm steel , cu…
-
- 33 replies
- 45.2k views
-
-
Just got my project AE71 on Sunday, I bought it off another member here Kebin. Its a manual, and being an AE71 it has all the gear to drop a 4AGE engine into it. :P That is the overall plan. Here are some photos for everybody: Unfortunately the corolla turned out to be deceptively rusty in the rear end. Before I went digging, the rust looked like this: After digging: There is also rust all along this seam Obviously from those photos, the rust was "repaired" once upon a time. Don't get me wrong though, Kevin had the car for a few years in which time it just sat in front of his house and I'm sure he didn…
-
- 25 replies
- 12.8k views
-
-
So, some of you may or may not know i bought the deep dish wheels off Phatke30 which were originally Littleredspirits wheels that were sold last year. Well....i bought them without rubber and it just so happened that my dad wasn't happy with the new tyres on his 1965 HD holden ute, so he said i could buy them off him when he sourced some bigger tyres. The tyres that came off the ute are 205/60/R13 Federal Formoza FD1's http://www.federaltyres.com.au/fd1 Although they are a family car tyre, they look quite mean on the smaller rims :y: So heres some pics....warning - may need a towel handy. :hmm: Yes, the fronts stick out a little too much so i will hav…
-
- 13 replies
- 6.5k views
-
-
-
- 3 replies
- 2.3k views
-
-
So Bianca's left for S.A allready and I'm left here to finish off my rehab stuff. If anyone see's a red n/a aw11 mr2 on vic plates give her a wave, thats her new car. I've gotta get a car on the road soi can move across and the spirit has been chosen over the mr2, mainly due to the fact i wanna turbo mr2 before i get that over in s.a, that and its goin to get colder and wet soon. At the moment as it sits its dead standard with the usual rust. Its goin in for a RWC check in 30 min to see what i need to do. At the moment i know i need to fix rust on the arches and change the rims over to the other rims i have with decent tyres. I would have done this allready but bianca…
-
- 73 replies
- 14k views
-
-
Just bought her off a nice bloke named chris up in the central coast. Car: 1974 KE20 Daily/Project Motor & Driveline: 3kc, 2 speed auto Wheels & Tyres: Bone stock Interior: Complete stock interior Body: Little bit of rust and bog, ding in passengers side front guard. First thing that i want to do is change the engine to at least a 4kc with 4 speed and some better looking and wider wheels on the front. still researching all the possibilities. It was only supposed to be a daily that i'd let go after at most a year, but after owning it for a few minutes i couldn't help but keep thinking of the things i wanted to do it. I'm …
-
- 1 reply
- 2.6k views
-
-
Hey. ive been browsing these forums for few days now, seeing all new tutorials everybody sweet rides. this is my first post and i thought to introduce the car alongside with me afterall it is a corolla forum is it not? I originaly had an AE92, that had a very fatal demise to a red light runner destroying it as i was turning. so i thought why not just buy another one, tonnes of spare parts etc. thats to explain the car sales.com.au in the first picture, and umm if I'm in breach of your rules in advertising, please tell me to edit the message or moderators admins do so yourself. :cool: here is my AE92 From: To: From: To: theres more shots i …
-
- 1 reply
- 2.8k views
-
-
1980 KE55S XX Corolla Coupe 4K-C (1300cc) 4 Speed manual Stock except for the 14x7.5, 0 offset rims and now with fender mirrors, black crystal headlights and front lip... it is going in next week to get the corona front strut conversion modified as coilovers and reset and an extra leaf in the rear and sway bars all round which should tighten it up and bring it down to earth... at the moment the suspension is shagged, and the breakes aren't much better.... once that stuff is sorted it will be time to move onto the engine.... oh and some watanabes are currently in transit...
-
- 4 replies
- 5.6k views
-
-
-
First of all id like to introduce myself, I'm Robert Davies, I'm 17 in 2 weeks and about 3 months ago i bought myself a 1983 Late model Ke70. It needed a good clean up and a good tune so i ended up scoring it for $500. I decided it being my first car, i should probly make it look good for its age. i don't have any before pics of the car unfortunetly :drgrim: The previous owner was a retired auto electrician and i must admit he wasnt very good. here is a picture of the dash and his wiring up custom guages. i decided i should also paint it and probably do it up for future racing possibly a track car. So ive stripped it ready for sanding..... this is my progress so…
-
- 16 replies
- 5.8k views
-
-
HEY ALL Ive been driving paddock bashers for a very long time now 6 years :hmm: i started when i was in year 6 well now I'm sixteen got my l's and have owned 3 cars already not many people get that chance. well all of them totaled up to bout $2700 i started with a datsun 200b for 50 bucks i burnt out the 2ltr by only keeping it in 1st and second and reving the sh#t out, now it only runs on 3 cylinders and is so slow so now it is the car heaven and its remains are in the can of coke I'm drinking now. my second car is a toyota corolla seca ae92 i got it $2500 its a very good car my mum drives it on a daliy basis but when i get my p's i will and last but defintly no…
-
- 3 replies
- 8.7k views
-
-
Hi Everyone. Just got my hands on a near overrated 4 door ke20. Spec: 1973 Delux 4 door sedan 3k 2 speed toyotglide Original 56000 km's not miles 2 owner, lady had it for 25 years, keeped in garage all its life. Lovely greeny yellow original paint. japanese assembled with all crome trimmings inside and out. Abit smokey but who can complain when its the original engine : ) Just need to put sum whitewall tyres on. Tell Me What You Think Of Her and what i should do to it.
-
- 20 replies
- 13.4k views
-
-
this is not a build thread just a place for some pics and info on my daily. picked this up off Andy after i pranged the yellow 70 JDM Te70 Sprinter that must have been imported at some stage differs to local 70's big time Its a TE70 Sprinter 1.8 XL with a 13T-U engine, T50 gearbox and T series drum brake diff. It was factory fitted with a T40 and and an S diff, but someone went to some effort as the car has that upgraded driveline, proper flared rear guards and has recieved a respray at some stage. still has steering box like a T18 but its fine for daily use You can notice that the front end is different (lights and bumpers), along with the C Pillars a…
-
- 7 replies
- 4.8k views
-
-
Hi all. My name is Peter. I have been lurking this forum for a while now, ever since I even considered getting myself a KE70. I got one from a mate that wouldn't sell it even after trying for over a month. Then one day she randomly messaged me asking if I still wanted to buy it. I jumped all over it! Here she is... The car, not the friend, lol. I like how the wheels almost fill the guards, but I will get some nice aftermarket ones soon to fill them right out, maybe even poke a little. One of the first things I am going to do is lower the car. Look at that ride height.... Then exhaust / intake and wheels. If you are interested in th…
-
- 3 replies
- 2.9k views
-
-
my first car I bought was none other than an 87 corolla, and she goes pretty good for her age aye I'm interested on going for a cruise sometime in June, email me @ [email protected] if ur interested in coming the location of the cruise is Norah Heads, which is just past the entrance on new south wales's central coast and has some fantastic scenery, a carpark excellent for photoshoots which displays the ocean in the background, and there is also an 100 year old lighthouse which would be great to have in the background of a photo with ur car. Just tell me if your interested aye, its a pretty good place, is there anyone else out there with an 87 rolla, if s…
-
- 4 replies
- 3.1k views
-
-
HI 2 ALL,located Brisabane Northside.just a quick hello,and hopefully a picture shown of my free aquired ke38 windowed panel van from my dear ol nan. her ownership of this car .............wait for it.........22 years of its 27 years of life approximately needs a tidy up,runs mechanically very well (she always looked after the car mechanicals)well a mechanic did seeing as she is nearly 84 yrs old. This car has air-con and a station wagon seat fitted (mod plated in adelaide in 1988 for it) so it can carry four people. anyhow`s you guys have a cool club thing going.with a good read of info on these lil corolla`s (sorry I'm a mopar follower mainly) thanks T…
-
- 39 replies
- 18.4k views
-
-
Hi I'm Grant; just joined up to this fourm Had my Ke70 for about a year now and it's slowly coming together, here is a few pics i'll post some more info when i get some time.
-
- 7 replies
- 3.5k views
-
-
I bought back my old 55' as I sold it a few months back and got a phone call the other day seeing if i wanted it back i was like hell yeah, so i sent my sister out to get it (I'm in victoria atm) as I'm planning on selling my current car soon, only shame is its come back with a broken drivers seat (i knew about this have been trying to get one for the guy who bought it) other than that the dammage is still the same as when i had it it now has 157xxxkms for the birthday resto (yes resto shes 30 this year) I'm looking for a few parts to get her looking showroom shmick so if you can help with any please pm me or reply in this thread I NEED: SEATS FRONT AND BACK - C…
-
- 30 replies
- 11.2k views
-
-
OWNER Daniel Kirkness YEAR/MAKE/MODEL 1988 AE82 Hatch 4a-ge Bigport Twincam MODS: Sports Muffler Pod Filter Lowered Superlow Springs CSA 15' wheels Oil Cooler Platinum Plugs Top Gun Spark Plug Leads Red Engine Dressup Trim Vermulean Hollandia Sunroof INTERIOR Stock Twin Cam Interior Front Red OBX Daytona Fixed Back Race Seats Sports Steering Wheel After Market Gear Knob and Boot Shortened Shifter Fire Extinguisher STEREO COMPONENTS New 2007 Sony Head Unit 6x9 Fusion Rear Speakers 4' Fusion Front Speakers 12' 1000W Pioneer Sub 600W Coustic 2 Channel Amp PLANNED MODIFICATIONS Full Race Exhaust System 16' Rims Full Resp…
-
- 19 replies
- 24.9k views
-
-
Hey this is my ae92 ive had it for nearly a year now and yea i love doin all the mods myself its so much better (except when something stuffs up!!!) But my dads a mechanic so yea that makes it easy. So far since i got it ive installed a pod filter, 4in panasonic speakers up front, us audio 6x9s in the parcel shelf (with LEDs in the grilles), Us Audio Amp and 12in Sub, Saas pedals, gear knob, handbrake lever and steering wheel, Kenwood head unit (forgot what it is but it has usb and aux inputs and all that), blue neons under the dash, missle switch to control the neons and 6x9 leds, paris stickers vinyl/sticker on the doors and yea, a few other bits and piece…
-
- 3 replies
- 7.4k views
-
-
well ive been on this site for a while and have decided to put up my project. Car 1984 ae71. Specs- current full respray taking plate in midnight blue. Has been straightened and all rust has been removed and given sweet love to bring back its former glory motor- currently nothing. going 4age 16v small port but if you have a 4AC lying around and your in Adelaide let me know. suspension- chopped rear falcons and front Vl all round with 25 year old thrashed prostutional shocks :P but that will soon change. also white line front strut brace white line adjustable pan hard rod and tercel sway bar also RT142 corona control arms and new tie rod and rack ends th…
-
- 7 replies
- 4k views
-
-
Thought i would show how i made my work bench this weekend. i wanted a high and narrow work bench to fit on the side of my garage.. so went to bunnings to get some tube steal but they don't have this steal (they've got every thing els:mad: ) so rang my dad who works for a steal place near Tamworth. and asked for.. some square tube steal about 4mm thick 4X 25cm long 4X 100cm long 4X 170cm long came to $38 then borrowed my farther-in-laws ark welder. got new pk of 50 welding rods $15.90. then started welding bits together but 1st hit the part i was going to weld with a wire brush. now I'm a baker not a welder i just picked up a ark welder one da…
-
- 1 reply
- 1.9k views
-
-
started this project 2 yrs ago, have done a fair bit to it since. atm its in gettin 4ag carb job done to it, but its taking ages (mechanics a wanker). heres my latest pics of it since it went in for the heart transplant ive got a set of overrated xr4s for it, just waitin till it gets home!
-
- 20 replies
- 7.6k views
-
-
Hey guys, My names Jarrad, I'm new here and this is my first Corolla. I picked it up for $100 bucks, and its got a great condition, re-conned 4k in it. So I thought, what the heck. I have limited experience with shell repairs, so this will be an excellent learning curve for me. I can weld, but will leave that to my dad cause he's pro. So over the next few months, I hope you'll enjoy seeing my progress. http://s269.photobucket.com/albums/jj48/ja...20KE55%20Sedan/ - Thats my photobucket album with the pictures from when I bought the car. As I progress, I'll upload a few here for quick access, and leave the majoroty of them in the Photobucket album. C…
-
- 53 replies
- 13.6k views
-
-
hey guys just got a ae71 4ac about 2 weeks back got a 5 speed and loud exhaust, has really stiff suspension lowered a fair bit. future mods. 4age turbo??? eh somthing bolt in that happens to be turbo 2 way lsd coilovers new paint job... woth ke70 flat front hopfully once i find one and some others lol also wondering if anyone could help me get a ke70 flat front and also help me on where to get some paint/ where to get it done.
-
- 2 replies
- 1.8k views
-
-
hey all. i found an awesome bargain the other day, an offer to good to pass up. i found a 1967 rt40 corona, 93000 miles, one owner, all original and running... $500 its unlicenced and there are a few little dents and some rust at the front but nothing huge. I'm gona slowly restore it. anyway heres some piks, i'll get more detailed ones when the car gets to my house.
-
- 3 replies
- 6.2k views
-
-
Just arived and hour ago, this was the one on Ebay. Its pretty original and rust free.I just put in a battery and of she went. Needs accelerator cable, so if you've got one i need it! Don't know what i'll do with it, most likely re shell my KE 70 Kahanacross car into it so i can legally use it on the street! :P
-
- 7 replies
- 3.1k views
-
-
hey this is my new baby, brought it from some old fellow who brought it new. its has a 195kms on it and runs like a dream. my plans for it at the moment is to give it a good clean, whack some ae86 coilovers in, chrome bumpers and then when I'm rich put a 4age in her let me know what you think
-
- 2 replies
- 3.5k views
-
-
K so my nan bought this T18 brand new in 1979. She died in 1992 and She gave it to my dad. My dad then gave it to my little brother, who basically rally'd it and trashed it. Then the alternator went on it and the battery kept going flat, so my brother just dumped it in the backyard and left it there. So i thought i would pull it out of the grass and start fixing it up. Rust is aplenty. Pics below. Plans:- Fix all rust and respray Mild 4age na. Brake upgrades disc rear. Stereo 17 inch rims. it will be like a daily driver with reasonable power. I wont be drifting it or anything. Kinda just like, respect for my grandma to fix it up since its been rotting awa…
-
- 2 replies
- 4.1k views
-