Engine Conversions
Toyota Engine conversions - Q & A
1441 topics in this forum
-
Hi Guys, I just got myself a 5k from All state imports (yeah i got ripped off but Oh well..) which is to go into my KE20 74 corolla.... I have no idea where to start... the motor has all the air con crap on it, and bits and pieces *i think* i don't need.... How do i pull all the extra stuff off it so I can just bolt it in? What bits would i need to buy to make it a smooth swap? I know i need to get gaskets and stuff... but am a little lost :jamie: Cameron (who used to own the peachy KE25 that was wrapped around a tree) is going to help me next weekend to put it in, i just wanted to have everything ready to go? Thanks for any help you can provide! t…
-
- 19 replies
- 15.7k views
-
-
I'm thinking of converting the 4ac to lpg gas for the work car, but would it be worth it? anyone know places in melb that do the lpg conversions?
-
- 19 replies
- 9.4k views
-
-
Guys let me know what your thoughts are for a new exhaust on my turbo KE10 running the 5K at the moment.
-
- 19 replies
- 6.5k views
-
-
Hey Guys, i have recently acquired a 2T and am wanting to fit it into my KE20. I only have the engine. No g/box OR flywheel. If anyone can throw me some ideas/previous experiences about this conversion they would be greatly appreciated. :) I'm trying to keep to a minimal budget so the missus can't stop it happening :) . So any bolt in info will make life easier and more fun at the next cruise. hahaha :y:
-
- 19 replies
- 16.6k views
-
-
I'm fairly new to here, I own a 1981 KE55 Hardtop Coupe, I'm not really a fan of things under 2L So I was wondering about putting a RB20 Nissan Skyline motor into it. I was wondering if any of you guys or girls would know if it will work? I've also seen people put a L20B Nissan Skyline motor into one. Can I actually put a RB20 motor into my KE55? With a gearbox to actually fit? I need a bit of advice, Thanks.
-
- 19 replies
- 14.8k views
-
-
i am tossing up what would be best, 3tgte or 4age turbo for a ta22. both are about as easy as each other to put in. 4age would be cheaper but what would go better if and equall amount was spent on either motor? iv heard alot about 4age's but know very little about 3tgte's once done up. ????
-
- 19 replies
- 64.6k views
-
-
first, hello from a rookie in the states. i have just bought an 81 rolla (te 72 i think) 2door,3tc, 5speed. i am a decent wrench on older (read non-injected) ford inlines and eights---however on advice of a friend i bought the rolla--I WAS INSTANTLY HOOKED! being rodder/tinkerer from wayback i can't leave stock alone long and I'm considering an engine swap. here is my driving style: about 50% each city and hiway driving and occaision jaunt to the 1/8 mile. not building a doorslamming monster just a punchy, economical daily ride thats naturally aspirated, cheap on the ridiculously priced petrol here, and dead nuts reliable. I'm considering several (again non-injected) swa…
-
- 19 replies
- 5.5k views
-
-
hey all, i was just wondering if anyone has done this personaly because i have heard alot but have not seen any finished projects. i am looking at doing this myself ( only because it seems easy ) but i don't want to rip my 4k out for nothing thanks in advance
-
- 19 replies
- 9.5k views
-
-
hey guys just bought a rolla as a daily turns out she is a bit buggered I'm trying to decide on whether to rebuild a 4k but wouldn mind something with a bit more go. after something cheap and easy as i wanna start building my rx7 any avice would be great cheers!
-
- 19 replies
- 9.7k views
-
-
what are everybodys thought on this, good idea or bad? what troubles would i have, how difficult would it be to do? thanks.
-
- 19 replies
- 42.8k views
-
-
hey peoples, not sure if too many people have done this, (know of one) :) in the near future I'm rebuilding my ke20. when i say rebuild i mean completely strip it, redo the body and then fit a 13b turbo, rx7 5 speed, hilux diff, brake upgrade etc. just wondering if anyone has any info at all that would help me with this project. Cheers heaps Tom
-
- 19 replies
- 33.7k views
-
-
hi guys and girls names toby just brought this 36 wagon about 2 months ago and now need help with some things i just brought a 4age,t50 box,custom made engine mounts and gearbox mounts and now need help with fuel issue now because standed one wont handle it and if any one could help with it or know of more issue ill will come across and r willing to give info and addvice will be really grateful for every little bit thanks iam getting it ready to paint atm and doing 5 stud conversion all round for it so thanks for looking at my post and hoping some one on here can help me out as its my first corlla that I'm doing up thanks again guys and girls
-
-
- 19 replies
- 19.3k views
-
-
Heya, Ok so basically I'm kinda new to the whole car mod thing and i was wondering if a few of you guys could help me out. You see, as with most ke55 owners, i have nothing but stock under the hood and i would like to change that as i am starting to fix up my little beast into...well...an actual beast. iv already started on the interior and exterior and its looking good so far but theres no point on a car looking awesome if it doesnt have the goods to back it up. so now i think its about time to start work on the engine. The only thing is iv got no idea on what engine will fit into the bay of my rolla with not to many problems. i have asked a few people i know, abou…
-
-
- 19 replies
- 129.6k views
- 1 follower
-
-
Hey guys I'm asking I have a beams 3sge motor and I'm going to put it in a ke70 does anyone noe what gearbox i was thinking t50 or a supra celica but i don't noe if it will bolt up or if i need an adaptor plate or are there other gearboxes i can use that also will be strong as it will be my drift car
-
-
- 19 replies
- 84.5k views
-
-
Need some guidence from some people that have already done sinething similar (want to do it right the first time if I can hah) If anyone could link some similar build threads or throw some ideas my way that would be great My ideas so far are either a: 20v + twin turbo 16v ze + twin or pos. Just single R31 front end RX3 rear? Or hilux because its easier and cheaper I'm located in western suburbs Vic so some shops that might be able to help me out with turbo choice and and ECU set up. Thanks in advance for any help guys!
-
- 19 replies
- 282.9k views
-
-
So I'm doing the whole EFI,Wolf 3D thing as you all know,do i need to get an O2 sensor or do i just run it without one. Its all new to me.
-
- 18 replies
- 11.6k views
-
-
hey there , ive got a set of 15x7 wheels available to me , and ive got a guard roller to pump the guards just wondering if there is any other problems i will run into if i try and fit these on the 20
-
- 18 replies
- 11.3k views
-
-
RWD 4AGZE CONVERSION I will start by saying i did a shitload of research before i started. Now that i have finally got my hands on a T-50 X-member, i have discovered that the KE70 Panelvan has different Gearbox mounting holes in the tunnel, to the KE70 sedan/wagon. Hence the AE71 Gearbox X-member (T-50) wont bolt to the KE70 Panelvan tunnel. I have been thinking that i might be able to drill the spot welds out of the X-member mounting brackets in my KE70 Van, and replace them with the ones out of the tunnel in the KE70 sedan. I know the AE71 X-member bolts straight into KE70 sedan, cause my mate has a 4AGTE in his :'( Any Experts ??? Any suggestions ???
-
- 18 replies
- 14.3k views
-
-
I have rewired the factory 4AGZE harness for AE101 Trueno in to my KE70 panelvan. Everything has been wire up except for the speedo sensor. My auto electrician just said to leave it out !!!! I have read other article saying that it should be hooked up to the tailshaft with a reed switch ? Can anyone tell me from past experience ? Has anyone got pics of a reed switch setup on a tail sharft ? Ta :ninja:
-
- 18 replies
- 7.9k views
-
-
hey all i own two shoe box cars a 1979 ke55 corolla and a ford falcon xe would it be worth it and possible to put the straight 6 and auto into the corolla? is it possible? and would it go good? thanks guys
-
- 18 replies
- 6.6k views
-
-
gday all!! i am geting a turbo kit made up with manifold and i think a t28 garret turbo! I'm lookin for around 250hp atw!! i was told that it will hit full boost at around 4grand and make 250 atw on 18 psi!!!! (this guy knows what hes talking about!!) I'm getin the stuff from over east!! ( I'm in wa!) i will have the agze conversion (got the front cut!) i am getin a microtech ltx10 ecu 3in exhaust (hiflow cat and muffler!) i was thinkin of goin with the supra turbo fuel pump and injectors as (so I'm told) its a direct fit-up! front mount cooler and I'm keepin the stock oil cooler!! my question is what fuel regulator should i think about gettin and what other…
-
- 18 replies
- 5.6k views
-
-
Thinking of doing this conversion into my KE30 Corolla. Wondering though what kind of 5 speed gear box I could use without having to cut up the body in any shape of form. Or if people think this might be to much of a challenge let me know :) Got someone who reckons an early Celica 5 speed should work, but would like your guys opinions :D Cheers Fusion
-
- 18 replies
- 31.4k views
-
-
Hi everyone i have been looking at the many options for an engine conversion on my KE30. I can get my hands on a very cheap rb20det just wanting to know if it would be legal, i know that i should be able to put a 2 litre in the rolla but does it go on the amount of cylinders or the engine capacity or both????? Cheers thanks in advance
-
- 18 replies
- 22.1k views
-
-
hey can someone tell me a bit about the 4age 20v motor conversion into a ke20....how much roughly would cost to put in and if anyone would do it for a price...and all parts that would be needed to complete it........ thanks.....
-
- 18 replies
- 12.2k views
-
-
Hey all I'm doing a conversion on my AE92 Sedan. Taking the 4AFC and putting in the 100kw 4AGE, I'm going to try document the whole procedure. Infomation will be greatly appreciated like what parts i need for efi conversion and cooling ect ect just incase I havnt covered all aspects, easier methods to the conversion process would be helpful aswell. I am currently reconditioning the 100kw before the transplant so some advice before I get into it would be great aswell. Thanks Ian
-
- 18 replies
- 88.1k views
-
-
my job on this is to make it handle and stop, is it possible
-
- 18 replies
- 7.6k views
-
-
Well i've had the shits with all the questions about 'will my 3tc fit into my kexx??', this thread is for all those questions to be answered instead of starting new threads asking the same questions over and over again So question away ladies and gents, if you have a question post it in here and someone will end up answering it for you Thanks.... Justin
-
- 18 replies
- 10.1k views
-
-
Hi all, I'm looking at taking possession of a 1998 Altezza in the next month or so. The car has had a big wack up the rear and is unrepairable. The plan is to swap over everything in the engine bay (or as much as we can fit) into my wife's 1982 Celica. This Altezza has the 147kW 3SGE with the 5sp auto gearbox. We also want to fit the dash display and center consol into the Celica. My first question is what diff would you suggest we use with this setup?? We hope to buy and fit the diff for less than a grand (less than $500 if possible, not counting the custom drive shaft). I will keep you all posted as things progress and I'm sure I will have many more que…
-
- 18 replies
- 46.9k views
-
-
Just wonding how hard would it be to put a 13b into a ke30. Ive got one lying around an just wanted to know if it was an easy task since there tiny engines.
-
-
- 18 replies
- 78k views
-
-
Hey guys I have a 1970 ke20, at the moment there is a 4k in it with a 5speed manual gearbox,both in bad condition I am wanting to put a better engine in her but I'm not sure which one would be suitable to replace the current one. I also need to find a mechanic that wont rip me off and is reasonably priced with quality work I have an idea of putting a 4age in her but i don't know what to do from this point on, Or would a 5k be the better choice. How much would it cost to get this all done too. I have no mechanics in my circle of help so I'm lost. If any one knows of a reliable mechanic in the logan area who can help me. .
-
- 18 replies
- 34.7k views
-
-
So I'm looking to put a new motor in my ke30 but to put a SR20 in its going to cost me 10-15 grand to change shit around.. does anyone have any ideas of something cheaper and easyier. I'm on my p's and want a bit got power but I'm not will to pay 15 grand!!
-
-
- 18 replies
- 13.6k views
-
-
Alrighty..... So ive got myself a nice straight ke30 shell.... 4door, pretty straight. I'm looking at engine conversions and ive thought about doing a V6 ecotec transplant.... now one of the reasons for choosing this engine is the cost! these engines are dirt cheap and being on a budget, thats a big thing for me! I want to build the car as abit of a wknd fun car.... it will not be rego'd, i will trailer the car to events. I'm hoping to take it out to the drag strip, maybe a few hill climbs and circuit days even..... what are your thoughts on this particular engine in my car???? keep in mind that the car will be FULLY stripped and that its not going to b…
-
-
- 18 replies
- 77.8k views
-
-
- 1UZ
- TE38
- Engine Swap
- V8
-
Tagged with:
I want the most badass, ratty rat rod corolla wagon ever. Do you think I could fit a 1uz in my 1979 Corolla wagon? I know a jz wouldn't fit, it's too long, but a 1uz is shorter right? I may be crazy but...yeah no I'm crazy.. Help me complete my dreams. Haters will be ignored.
-
- 18 replies
- 651.8k views
- 1 follower
-
which engines will fit in a ke70 without very much work? 1.6l or bigger I don't wanna run EFI because then the conversion job will not cost too much money I have a 4k engine now 4A-G(E) ? 2T-G ? which toyota's can I find these in 3Y ? does this one fit in a ke70?
-
- 17 replies
- 38.6k views
-
-
This is just the start of something interesting. As it progresses I will try to keep you all up to date. As it stands the concept is to install the 1UZ and convert it to a manual box, possibly W58 unless I can fall across an R series to suit, but not withstanding the possibility of using the auto in sequential mode and taking advantage of the torque convertor lockup(100%drive and 100%engine braking).Needs more thought. I think it will be necessary to upgrade the brakes and the diff. I have some thoughts on these but at this point they need some more research. Don't expect this to happen overnight as I am just about to start building a HOUSE and this projec…
-
- 17 replies
- 8.2k views
-
-
Will a Ca18 motor bolt straight into a Ke70 and what other mods will i have to do to my car for a Ca18 to run
-
- 17 replies
- 44.8k views
-
-
Any hints for billet cams, hi comp pistons, and other hi-pe parts for silvertop or blacktop engine. Plases to buy, dudes to talk, etc. =) Some things in mind: +11.5/1 cr, hi lift/race spec N7A cams, cam gears, valve springs, rods, arp or other manufacturer bolts all around, engine management (fuel+ignition standalone), exhaust manifolds, etc, etc. NO vvti or stock ecu bull.. :thumbsup:
-
- 17 replies
- 14.1k views
-
-
I'm BUILDING A KE70 ROLLA SO FAR ITS GOT T18 LOCKER DIFF ,SIGMA LOWER CONTROL ARMS . WORKED 5K WITH A WEBBER ELECTRIC FUEL PUMP CAMS AND SO ON . BUT IT NEEDS MORE POWER .HEAPS MORE ! I WANT A 4AGE BUT don't KNOW WHAT ONE CAN ANY ONE GIVE ME SOME TIPS ON WHAT WOULD BE MORE APPROPRIATE FOR DRIFTING
-
- 17 replies
- 27.4k views
-
-
I have searched 4AGE's (for ages...TOYOTA joke :y: ) for a RWD exhaust manifold. Since i couldnt find one, extractors were my only choice. I have started to fabricate my extractors, but i am looking for comments & feedback on the flow and design of my headers :no2: Here is a few pics of the progress ( Primaries )
-
- 17 replies
- 24.3k views
-
-
hi all i know i'm not the most liked person on this website but i do have a person of being here well anyway this is my car it is a ke55 and i have put a 3tc in it and twin 45mm Webbers on it. i also have put a set of 4-1 extractors on it. it has been painted in a blue purple color with a pink and blue Peal i am also putting a silver flack though it. i have put a 2,1/2 in exhaust in it. i have a pair of bucket seats of it and i'm putting all new interior in it tinted windows soon as i get the money to buy them. well hear are some pic's
-
- 17 replies
- 14k views
-