Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Car Electrical

Car electrical gremlins/questions? Ask for help here..

  1. Started by B.L.Z.BUB,

    I really wanted to be able to switch my SC on easily, reaching for the switch on the dash was getting tedious. I also wanted it steering wheel mounted for thumb operation. So I went to Jaycar and got some coiled cable and a temporary on button. Found an old fender mirror thing which I bent and cut into kind what I wanted. Tested to see how the button would fit. Contact adhesive and cheap black vinyl.

    • 11 replies
    • 254.5k views
  2. Started by B.L.Z.BUB,

    I pretty much have a constant check engine light on my bigport 4AGZE yet whenever I do a diagnostic it comes up clear. Car runs fine, no issues. I'm not sure if its in limp mode but I don't think so. Any ideas?

    • 15 replies
    • 359.4k views
  3. Started by joshke70,

    Hi guys, so just recently in my ke70 the low beams are not working, all indicators work as well as reverse lights and my brake lights, but now for some reason my drive lights will not work, nor does it power up me dash board, anyone know why Cheers Josh

  4. Started by brillante16,

    Hi guys. I recently bought a KE70 cluster for my USDM 1.8 Toyota Corolla and I don't understand or even know how to install it. Can you guys help me out? I'm attaching the car I own and the cluster I bought. Any help!!! Thank you!!

    • 2 replies
    • 241.2k views
  5. Started by 85wrx,

    Does anyone know if it possible to get any of the 100kw smallport 4age sensor plugs? Mainly after the green and brown water temp sensor and thermister plugs, black coil plug.

    • 0 replies
    • 263.9k views
  6. Started by westendsquidward,

    i have a 1983 ke70 corolla and i can't seem to find a globe to fit

    • 4 replies
    • 258.8k views
  7. Started by Jierexx,

    Hi, Just re-assembled the engine after some maintance work. I got a short circut by misstake on the alternator when i was putting it back and now when everything is on its place again i saw that the charge lamp was lighting. Havnt done that before, and after checking the voltage on the battery it stays the same, around 12,3, when the car is off and when I start up the car. So seems like something have to be wrong with the alternator? Can the short circut have killed it? What to check? I know its hard for you to help with so little information but really need some help here. All the cables should be in the right place, well it can't be connected in any other w…

  8. Started by DSKEW3,

    so i have a few problems with my dash cluster first one is the RPM taco doesn't work, fuel gauge it moves a bit the tank is full but only go's to about 1/4 full then stops. not sure about the speedo as i havent driven it. it has had a 4AGE 20V conversion with a mircotech lt10s ecu also as seperate coils. if anyone has a wiring diagram that would help a lot cheers.

    • 2 replies
    • 251.2k views
  9. I've recently acquired a European zenki TE72 GT instrument cluster. I'm hoping to figure out the wiring so I can properly get it installed in my 1983 AE71... I have the US wiring book - it shows the wires going to each specific pin on the plugs. I'm looking for this same section for the 1980 TE72

  10. Started by OBSCENE,

    Just wondering if anyone can help me I have fitted a 4agze (from an 88 mr2) to a 67 ke10 and now I want to start fitting an a/c system. What I need to know is how to wire in the engine idle up there are two inputs that I can see which are ELS2-from idle up diode & A/C-From A/C amplifier. I'm not sure which ones to use or what the input voltages are.

    • 0 replies
    • 292.2k views
  11. Started by jnr_13,

    Hi Guys, Ive got a ke11 that I'm fixing up and converting it from a standard 3k carby to a 3k efi using a manifold out of a townace. I'm sure its been done pleanty times before but just wanting some tips on a ecu? thinking of using a microtech as ive used the past and also want to know if anyone has any alternator upgrade Ideas? should I use a standard efi alternator from a 7k or modify something else to fit? regards Joe

    • 0 replies
    • 308.8k views
  12. Started by henga12,

    Anyone done one who can post up some info? How did you go about wiring and where did you mount it

    • 1 reply
    • 250.6k views
  13. Was hoping someone could help me with a couple of questions regarding wiring a 4AGE into early KE30 2 door sedan. I'm primarily using the AE82 schematic. Its not 100% accurate but after studying the FX-16 diagram and ditching the AE82 relay fuse box I'm nearly there. 1. KE30 Ignition barrel is single poll where as all the 4AGE wiring diagrams I have show duel pole, AM1 and AM2. Ive used a relay from the AM1/ IGN1 to switch in the AM2/IGN2 power with 30amp fuse at the fuse link box at the battery. Is this how its usually done? I couldn't find any info. 2. How do I wire for 2 pumps ( LP and HP ). Can I use 2 relays latched parallel by the COR (blue/black wire.…

    • 1 reply
    • 297.3k views
  14. Started by peterd,

    the other day, I was installing a replacement rear demister switch in my ke35 and I managed to blow the demister fuse because the new switch was stuffed. With a blown fuse, the car wouldn't idle properly and would stall. Obviously I fixed the problem with a 20cent fuse but it just had me wondering if it's normal or if my wiring is a bit odd. thanks Peter

    • 1 reply
    • 323.3k views
  15. well lads my dx keeps cutting out when i turn on the lights or the heating but will go grand again as soon as i turn them off. I'm after checking all the earths and they all seem fine but I'm guessing theres something crossed and taking all the power from my flue pump ? anyone have any ideas or suggestions that would help sound lads badly stuck its an 1980 dx ke70 with full 4a-ge running gear ​the two indicator lights are very faint on the dash when i turn on the lights too ? :bash:

    • 3 replies
    • 297k views
  16. Started by colaflavour,

    I have a problem with my electronic distributor on my 4k and need to know what it would cost to have it fixed. RAA vehicle fault found: the car has power to coil -positive terminal, no switching at coil - negative terminal when cranking. Any idea of what i will be up for? Can someone just come and fix it for me cheap??? :(

  17. Started by argyboyz,

    Anyone know where I will find the fuse for the power windows/door locks please? ty in advance

    • 0 replies
    • 265.9k views
  18. Started by peterd,

    I was looking for some replacement switches for the door lights on my ke35 and came across these, which were perfect. They're a grounded 12v switch which plugged in and screwed in to the existing cable and hole. The car shops had nothing suitable and I found them at an electronics shop. They came from Altronics in Perth. item number S 5145 $2.45each

  19. Started by wil628,

    So my 4k is in getting rebuilt. I purchased an electronic dizzy with inbuilt ignitor. I want to run a tacho and I'm wondering how do I go about wiring it in now I don't have dizzy points anymore? I've never wired in a tacho so I'm just trying to get my head around it. I'm sure I could just dump it on an auto elec but I want to do it myself. any ideas/suggestions?

    • 2 replies
    • 314.3k views
  20. Started by Winnie,

    Hey guys, I bought a 1993 AE96 Corolla last weekend, it's stock as a rock and still in granny spec. I pulled the dash apart today to put in a new CD player and in doing so I somehow shorted the constant power to earth (when this connection was made the headlights came on) and now the car will not start. I have ignition power but turn the key and nothing happens, no relay or anything. Is there a fuse somewhere I have blown? I have checked all fuses in driver's kick panel and under the bonnet (I think). Any help would be greatly appreciated! Cheers, Chris.

  21. Started by THR,

    Hi all, I'm wanting to install a dry cell/AGM battery in my ae102 rally machine, but I'm not exactly sure which one to get. I've heard that Odessey batteries are the go, but I thought I'd ask for some expertise first. Any recommendations as to what I should be purchasing and where I should be be getting one from?

    • 7 replies
    • 266.7k views
  22. So with moving the throttle body post SC, it kinda makes a self feeding loop where the SC keeps the AFM open which keeps the SC on which keeps the AFM ope which keeps the SC on....and on and on. The only way to make it shut off is to put the clutch in and take your foot off the go pedal till the AFM closes. Or turn the SC off with the switch I put inline. Kinda annoying. Played with a budget solution. Got a voltage switch from JayCar. The issue though is that when you come off throttle the SC would turn off so the plan was to use an interior light dimmer circuit to keep it open for 'x' seconds to cover gear changes. Came needing a few bits assembled. …

    • 10 replies
    • 269.9k views
  23. Started by Ke70 grannyspec,

    Anyone know any good autoelctricians around the sydney area, just converted my ke70 to 4age from a donor car took the loom aswell, installed it exactly the same and ran,all the coil wiring as the donor was a ae71, ke70 is on the other side,I get reds in the dash but car wont start fuel pump doesnt turn on either, suspect their is a issue with the relays, and help or a reccomended autoelctrcians, would be apreciated thanks ,

    • 0 replies
    • 308.9k views
  24. Started by ke30kb,

    Just got my dash back from getting re-vinlyed, I installed the clusters. - Speed, Petrol and Heat signal active - Park brake light and indicators lights active - Speed backlight and the backlight for the petrol are out? All the connections are in the back correctly, what could be wrong?

  25. Started by ke30kb,

    Hey guys I have recently out my dash back into my 76 Ke30 sedan, I noticed that I haven't relocated my dash earth and have no idea where it is so as you've guessed all my accessorie lights are out! Where can I find the dash earth so I can get my lights working again?

    • 1 reply
    • 333.2k views
  26. so have just finished the conversion on my ke70. just a 4age with twin dellortos and a procomp ignition. the dizzy has blue red white wires. don't know what the blue is? engine wont rev past 4500.. I think the pro comp is ʞ©$ɟed? I know they're shit but its all I had to work with. I'm thinking the limiter is stuffed on it?? theres a pic of it. have t changed cam covers yet haha any advice??

    • 0 replies
    • 146.2k views
  27. Started by ke30kb,

    I'm looking for the RPM signal wire in my 76 Ke30 to install my RPM Tacho, I haven't had any luck and was wondering if someone could help me out in locating this wire. I'd greatly appreciate it. I've got all the other wires sorted Cheers guys!

    • 2 replies
    • 160.1k views
  28. Started by OdinNL,

    Hey Guys, For a time now my charge warning light has been on, even though it has been holding nicely at 14.3 volts when running, changed out the alternator just to check (I had a spare around) but ofcourse that didn't work. should I be looking for broken cables ? what do you guys think. Gr. Odin

  29. Started by ae95R,

    Good morning all, I have a question regarding the programming of new keys to my 2002 zze122r corolla conquest wagon. I have just purchased this vehicle and the only key it came with is the gray "sub-key", it unlocks all locks, disarms immobiliser once inserted into the ignition barrel and starts the car without a problem. I would like to purchase a key like the original with the lock/unlock buttons incorporated into the key head to make use of the keyless entry. My question is; Using the programming method of opening and closing doors/inserting key into ignition etc etc, can I successfully program a new key to this vehicle if I only have the gray sub-key? If n…

    • 2 replies
    • 40.8k views
  30. Started by taco,

    hi guys yeah kinda have a problem with the wiring. To give you a idea i swapped a running ke70 16 4age into a stock ae71 auto. So far i have done the ecu, fuel pump, coil and engine bay wire box thing. So i swapped the engine box plugs from the ke70 into ae71 just cut the two power wires and resoldered them. so i have hooked everything up and put the battery in and the hazard lights came on and when i turn the key the rad fan comes on and the fuel pump and thats it. I think the problem is in those four engine bay plugs. .....

    • 3 replies
    • 189.9k views
  31. Hey guys, i have a problem with my ke70 that is annoying the crap out of me, and before i go through the entire car to fix it i was just wondering if anyone had the same issue. the 5a fuse in the drivers side kick panel blows everytime the car is turned off. I'm not sure what is causing it. faulty battery? anyway any ideas would be appreciated. thanks.

    • 1 reply
    • 164.8k views
  32. Started by GJM85,

    I've always had issues with inaccurate instruments in the cluster of my ke20. I believe all issues are related & are as follows. #Charge light glows when wipers, reverse lights, interior fan or indicators or on. When all the above accessories are on and the car is running, voltage at the battery is 12+ volts. So that rules out the alternator. #When the fuel tank is full, the gauge reads just over half a tank. Inspection of the dial shows it's in no way bent or damaged & voltage at the sender fluctuates between 1 & 10 volts. #When the car is at full operating temperature the gauge reads just on the first line. As above voltage fluctuates between 1 &…

    • 5 replies
    • 114.2k views
  33. I have been told I few people have done this same dash cluster conversion, i just need some info on what was needed to wire this up, any help would be greatly appreciated, if you have a wiring diagram it would even be better. Thanks Terry

    • 0 replies
    • 111.5k views
  34. Hey guys I'm calling on some help from some one cluey with eletrics i just purchased a ke70 with a 4ac and a t50 box in it but has no reverse lights i need to get them working to get it over the pits any help would be much appreicated thanks in advance. where do i start looking? do i just need to make a plug to go on the gear box?

    • 2 replies
    • 150.3k views
  35. Started by Corona_man1,

    Hi there, I'm after some help for my 1981 KE70. Iv searched for ages and can't find anything of value. I need help with the fuse block located in the engine bay , the one in my picture. I have the plugs that go into the body loom, but don't have the other plugs. Can someone please help me out. I need to know what pins to use and what they go to?. On the bottom of the fuse block cover are numbers that correspond to the pins, but I don't know what they go to. Any help much appreciated. Iv had no luck on my usual New Zealand site Club-k. Hopefully some Toyota fans can help me out on here. Thanks

  36. Started by ATOYOTA,

    I know it's not a corolla but I'm hoping someone can be of help. I'm having a major problem with starting my charade and I've traced it back to a weak spark coming from the coil. Just cranks over and doesn't attempt to spark and when I pull a lead out it has a very weak spark. Tried cranking with the coil lead earthed and again, very weak. Plugs are white as the KKK. Checked fuses and they're fine. It's had trouble starting before where it's taken a few cranks and struggling to start. I was wiring up a tachometer and fiddling around with wires under the dash. Started the engine fine, then turned off for about 3 seconds, then would just crank with no at…

  37. Anybody got any links to websites for toyota wiring diagrams and pin-outs and the like. I'm specifically looking for the passenger side kick panel fuses of my EL31. In spite of my best efforts to mark everything while moving the engine bay fuse box, i've missed something and now the car won't start. I've got the whole dash out now so nice and visible, any help from the electrical boffins out there would be greatly appreciated. Cheers. Andrew

    • 1 reply
    • 73.9k views
  38. Hi Guys, I recently bought a Calypso Blue KE55. All going well until brake lights stopped working. Suspected dodgy stereo install from previous owner. Fuses keep blowing as soon as I replace them. Have removed all sub and amps to isolate problem. Still blowing fuses immediately and draining battery. Suspect a voltage leak somewhere. Unplugged brake pedal switch and still measuring 12 volts across the fuse holder. Can anyone recommend a decent auto electrician (inner west / artarmon) or solution to my problem? Cheers, Tim

    • 2 replies
    • 95.5k views
  39. Hey guys just wanted to know what I could do to help my car get a better power supply I think my battery might be a bit dead or I need to find away to get a bigger alternator to fit well thats my thoughts I want to in stall more subs but holding back untill I figure out how to get a stronger power supply with out compromising the car eg melting things or other problems

    • 3 replies
    • 91.8k views
  40. Started by ke70w brad,

    i got this today not sure on what the go is

    • 4 replies
    • 88.4k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.