Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by LittleRedSpirit,

    Engine/cooling/mounting and clutch Parts required 4age 20v engine filter socks yager motorsport front thermostat fitting modified rear cooling plate side water blockoff plate aftermarket engine computer dizzy cover AE86/71 clutch master cylinder AE71 manual pedal assembly if you have a ke70 Slave cylinder to suit the gearbox either jdm or adm 4age flywheel, 200mm or 212mm Clutch to suit, yes you can use the ae101 or ae111 clutch with 212mm flywheel rwd exhaust manifold/extractors coil and igniter, for wasted spark and custom leads or 1zzfe cop setup with inbuilt igniters AE86/AE71 engine mounts - steel and rubber sections. AE86/71 …

    • 37 replies
    • 275k views
  2. TEDDY'S NOOB GUIDE NO #0052 4AGE into RWD KE70 / AE71 / *E7* Conversion Notes Hey All. There's not a day that goes by, when someone ask's *How do i put a 4age into an *e7* ! Basically, i keep pm'ing people about it and kindly showing them where to go, but its getting a bit rediculious. So, here i present to you all the links i know off, that can help you out with your conversion. Its almost a copy from the same thing i made at rollaclub, but more things have poped up since. So, its a revised list as such. Please read it, because there is **alot** of data in there. Basically from now on, any topics *how do i install a 4age into my.. etc* will be trash…

    • 38 replies
    • 786.8k views
  3. Started by KE70MAN,

    hey guys, kinda don't have the money for a 4age conversion, but i was thinking about putting a turbo on the stock 4k-c motor. turbo would not be bigger than a T25g so boost wil be max of 10-15psi, but i wont have intercooler so like more around 5-7psi. has anyone done or know somebody that has done this? also i was thinking to myself, cus the intake and exhaust manifold are on the same side, the turbo would have to sit a little low. is there anyway or any brand of side draught carbies i can get so i can sit the turbo a little higher? another thing that came to my mind was that maybe the 20 yr old engine can't handle a bit of boost, like head gasket might blow? I'm n…

    • 219 replies
    • 560.1k views
  4. I thought I'd write this for the guys just joining and full of enthusiasm to build a fully sik drifta. Hopefully some of the members who have completed projects (and some who haven't) will add their wisdom. First- Decide on how much time you are realistically going to spend on the project, which means listing what you are going to give up to do it. We spent two nights every week and every Saturday working on the rally car when I was in South Africa for a decade, and that over-rode almost anything else. Without that sort of discipline it will be too easy to give up when you hit a hard part. Then- make a list of what you want the car to do. Drifting, track-work, …

      • Like
      • Upvote
    • 25 replies
    • 168.3k views
  5. Hey all, i put this up on ae86dc but thought i'd chuck it up here if there was any interest. I recently had some success with my 4age conversion into my ke70 in that i was able to get it made "legal" without engineering. Long story short, applied through regency, they said alright, got car inspected, and they're in the process of issuing a "certificate of exemption" for me. Not sure how many people will be interested in this, but can't hurt i guess!

    • 11 replies
    • 51.3k views
  6. Heya, Ok so basically I'm kinda new to the whole car mod thing and i was wondering if a few of you guys could help me out. You see, as with most ke55 owners, i have nothing but stock under the hood and i would like to change that as i am starting to fix up my little beast into...well...an actual beast. iv already started on the interior and exterior and its looking good so far but theres no point on a car looking awesome if it doesnt have the goods to back it up. so now i think its about time to start work on the engine. The only thing is iv got no idea on what engine will fit into the bay of my rolla with not to many problems. i have asked a few people i know, abou…

  7. Started by tika1104,

    i have a stock '88 rolla hatch and i wanna upgrade the engine... I'm relitivly new 2 this so i dnt no what engine would fit or such... any1 tha could tell me what engine would fit and how 2 do would b much appresiated :S

    • 2 replies
    • 2.4k views
  8. Started by macmacs,

    Simple question, will it fit? It's to swap in the 91 to replace the engine.

    • 1 reply
    • 2.2k views
  9. Hi all, lurker, now poster... Looks like I'll be getting my grandmother's auto ke70 that I've been lusting after for a while complete with oily 4k. I'll just be driving it for a while but I am thinking of doing some sort of conversion down the track when time and $$$ allow. Done a fair bit of reading here and I'm curious about real $$$$ when it comes to conversions. Not just the motor, but also driveline, brakes, engineer's plate (the bits they don't tell you about). Not, "I've got 15 corollas in my shed so it cost me $5", but real money. Coz I I'm a tightwad and really want to know. So here's my question... How much does it really cost to do; Beams swap (dream) …

      • Upvote
    • 22 replies
    • 11.2k views
  10. Started by KeelzaMate,

    Gday guys, don't know if this has been posted about before or not but i was having a converstion with a mate who owns a mazda 808 (similar engine bay dimensions as a ke30/55) and he reckons he could fit a 1 or 2jz without any firewall or tunnel cutting (maybe some sledge hammer work). It may be possible but the only worry ive got is the weight distribution, you would have to mount the fuel tank way back in the boot or sandbag it or something. What do u guys reckon? Could u fit a 1 or 2jz in a ke30/55 without cutting the firewall or tunnel? I know this modification wouldnt be street legal due to the power to weight ratio. Cheers, Keelan

    • 8 replies
    • 14.1k views
  11. Started by Daniel.Kessler,

    hi guys so ive owned my yellow ke70 for about a year and a half it was my first car and ive moved onto bigger things like my vx ss but i want to use my rolla for a drift/street car I want to use a 4a-c engine if there is a forum already about this could someone please link me. I have had a look around and can't seem to find much... what I'm really after is a list of all the parts required to get a 4a-c engine into a ke70 and have it running stock as a rock my reasons for a 4a-c is that I'm after a relatively easy conversion as I'm still learning about all the ins and outs of engines and cars plus with a set of snake cutters on the rear I'm hoping for a bit of …

    • 1 reply
    • 58.9k views
  12. Started by lph247,

    g'day I'm swapping my 3k motor with a corolla seca 1.8 to make mine better for the freeway just not sure whats involved in converting this motor to rwd and if a 4k gearbox will be ok? anything else need upgrading? is it worth doing? any and all help is greatly appreciated cheers

  13. Started by ke20man,

    hey i just did a engine swap in my ae82 it had the standard 86kw tvis 4age bigprt, and i have a put the 100kw small port in it. got it all going but it keeps cutting of when u pull up at trafffic lights or stop sudenly.... has any1 had this problem before? i have taken it to a efi auto electrition and he reakons hes never seen anything like it. could it be ive used the 100kw injectors and they flow alot more than the 86kw ones as i did a flow test, could these bigger injectors be puting to much fuel in and the computer can't handle it or..... any help would be realy appreciated cheers nick

    • 4 replies
    • 3.5k views
  14. Need some guidence from some people that have already done sinething similar (want to do it right the first time if I can hah) If anyone could link some similar build threads or throw some ideas my way that would be great My ideas so far are either a: 20v + twin turbo 16v ze + twin or pos. Just single R31 front end RX3 rear? Or hilux because its easier and cheaper I'm located in western suburbs Vic so some shops that might be able to help me out with turbo choice and and ECU set up. Thanks in advance for any help guys!

    • 19 replies
    • 282.9k views
  15. Started by d4ng3r,

    sooo i want to upgrade the engine from the ke and was told that a 12a/13b wouldn't have to be engineered, is this true? would any one kno of any decent engineers that could assist me in this venture I am in nsw Thanks deano.

    • 2 replies
    • 3.8k views
  16. Started by old skool rolla,

    what do i need all i got is the car and motor

  17. Started by mr_1000,

    Has anyone put a 12A rotary engine into a KE10/11 before? how hard is it to do? are there clearance issues with anything? Was the engine conversion engineered in NSW? cheers

  18. Started by 1975 KE30,

    Hey guys I was looking to see if anyone has done a 12a swap in a ke30 If so -how difficult -the hardest part -what gearbox, tail shaft, diff and front end -rough cost -what modifications needed to be done Thanks

    • 7 replies
    • 12.3k views
  19. Started by RUNNIN LOW,

    hey guys/girls I'm new to the corolla forum so i don't no if there is already a thread up here about this and if there is could some one point me in the rite spot to find it I'm sure someone or many people have done it. i have a 12a with 5speed seires 4/5 box that I'm about to slot in my ke30 can any one tell me if it will fit or do i have to mod my gearbox tunnel? and also any hidden extras i might of forgotten about i have built a few custom cars before so I'm not scared to chop stuff out i would just like to no first any help would be great thanks Steve

    • 14 replies
    • 20.6k views
  20. Started by KE30RE,

    all I'm after is some info on driveline options for a ke30 rotary

    • 3 replies
    • 3k views
  21. Started by toybox,

    hey people I'm looking down the path of a 12a or 13b swap into the ke38 just wondering if any one has tryed this before?

    • 6 replies
    • 4.4k views
  22. Started by Brendo,

    hey guys i got a 1980 TE-72 T-18, its a pure pig but with stock engine. don't really wanna spend dollars on the engine, i want ROTOR! anyone had anything to do with a similar/same conversion? input would be great guys.......... cheers Brendan :(

    • 63 replies
    • 73.7k views
  23. Started by chamb43,

    hey guys... just wondering how hard it would be to put a 12a or 13b rotary in my ke70 wagon... and what kinda of prices am i looking at? cheers :)

    • 1 reply
    • 3.8k views
  24. Started by mumblezzz,

    A friend of mine has basically a complete 12A turbo engine in his garage and has offered to do an engine conversion for me for extremely cheap. It is my understanding that this wont be legal but he seems to think it is. What i want to know is if its a good idea? Can it be engineered and if so what sort of work would be required to get it to pass? also what would be the best way to go about strenghthening the chassis. I was thinking roll cage and seam welding or is seam welding a waste of time?

    • 24 replies
    • 30.8k views
  25. Started by soa.rota,

    Just wonding how hard would it be to put a 13b into a ke30. Ive got one lying around an just wanted to know if it was an easy task since there tiny engines.

      • Upvote
    • 18 replies
    • 78k views
  26. Started by ke20 king,

    just would like some info with putting a 13b into a ke20 neva done it and would love it if some1 who has can help me with ways of bolting them up, etc cheers.

  27. Started by shanesykes56,

    Looking for info and and pics to help with my project

      • Upvote
      • Downvote
    • 6 replies
    • 100.3k views
  28. Started by tipsi,

    How hard is it to drop a 13b in to my ke10 not sure yet if I want turbo or not yet help

    • 9 replies
    • 15.5k views
  29. Started by benzo,

    Hey, a second option instead of putting money into a 4K to get 120 at most kW at the wheels, I am considering a non turbo 13B with RX7 gearbox and custom tailshaft. What is required in terms of parts to get this done and how much would I be looking at price wise. This seems a smarter and more long term option as a non turbo 13B can quite easily make 130rwKW with very minimal mods, qand close to 200rwkW with further mods such as periphal port full internal work. Any help appreciated, Ben.

    • 50 replies
    • 34.5k views
  30. Started by pattie05,

    Hey guys new to this a mate just gave me a ke70 doesn't run and auto was hoping i could just drop a 13b in as i already have one. just wondering what needs to be done and how to go about it, or if its even legal i live in tas, i have read there is alot of work into putig a s4/s5 rx7 turbo box in but think it would be worth while also not sure on what diff to use, or how to go about mounting the motor this is pretty much the first build I'm attempting. any help would be great cheers!!! :worship:

    • 3 replies
    • 5.2k views
  31. Started by killa13b,

    ive just started doign my ke30 striped him down no rust stragth as i just don't know what engine to put in it , i was thinking 13b or maybe v6 any ideas

  32. Started by cairnske70,

    hey guys new to this website but I have been reading a lot of posts the last few days about engine conversions in ke70s. I am going to look at a ke70 tomorrow to buy. so I am thinking ahead as to which engine to put in it. I want to be able to drive the car legally on the road and at race and drift events. I'm an apprentice panelbeater with next to no experience with engines but I'm not afraid to jump in headfirst as I have a lot of people around for advice. I don't have much money and am looking to do a conversion for cheap. now from everything I have been reading to get change out ok 10k for a 4age conversion is doing well (personally I really don't want to put a 4age e…

  33. Started by brennan,

    Hey everyone , pretty much where I'm at ive decide to do reseach an see if possible i can put a 13B rotor into my ke70, pretty much after general chat chetter , advice an tips maybe somone has done this conversion an could help us out ?? Cheers Brennan

  34. Started by Rocky_RX70,

    Hey rollaclub memebers. If anyone needs to know how difficult it is to get a 13b rotary into a KE70 Corolla, I can tell you. I've done this. Things to consider:- -turbo or N/A -gearbox type -fuel injected or carby -series of rotar -type of corolla KE70 or AE71 -budget $$$ What I chose:- -N/A (extend port)150-200hp -RX5 5spd Gearbox -48mm IDA Webber Carby -Early 4 port 13b w/ s3 RX7 electronc distributor. -KE70 (clean no rust) …

    • 17 replies
    • 176.3k views
  35. Started by ke20rota,

    hey peoples, not sure if too many people have done this, (know of one) :) in the near future I'm rebuilding my ke20. when i say rebuild i mean completely strip it, redo the body and then fit a 13b turbo, rx7 5 speed, hilux diff, brake upgrade etc. just wondering if anyone has any info at all that would help me with this project. Cheers heaps Tom

    • 19 replies
    • 33.7k views
  36. Started by Mickey H,

    Hey all, just bought my first corolla (ke70) and I'm not sure what engine to put in it. It used to run a 12a rotary, so the transmission tunnel has been cut up and remade to suit. I want to use this car as a drift car, something to get started with, but I'm not sure what to use. The 13b has great power to weight ratio, but not sure if it would be suited for drift, and i've heard some people are drifting with an sr20+ke70 combination, due to it being more powerful then a 4age. This car won't be road registered (is it possible to register a car with a 6 point cage?) so engineering wont be a problem. So yeh thanks in advance, :)

    • 49 replies
    • 43.9k views
  37. Started by lucky_13,

    g'day guys, just wondering if either of the two can work cause i love my little hatch but want it to put my ss away

    • 7 replies
    • 3.5k views
  38. Started by ke13bt,

    i am in the process of doing the conversion, but i would like to know if it will ever be legal. and if not then how do cars like the grimas corolla and the like do it. opinions welcomed. i am in brisbane queensland.

    • 6 replies
    • 3.8k views
  39. Started by Rockn Rolla,

    13b turbs or 4agte? I have recently scored a ke10 rolla and am unsure of what engine i want and need some help makin up my mind! what u reckon....

    • 14 replies
    • 5.3k views
  40. Started by KErolla,

    ok guys after a lot of thought i was thinking that y are 13bt not leagel in old rollas. but that are able 2 put a 13bt in the mazda 1000 utes or the lil datto utes ther lighter than the rolla so i just don't get y the u can only put a na 12a in a rolla isted off anny thing biger . :D

    • 23 replies
    • 9.1k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.