Skip to content
View in the app

A better way to browse. Learn more.

rollaclub.com

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Engine Conversions

Toyota Engine conversions - Q & A

  1. Started by KE70MAN,

    hey guys, kinda don't have the money for a 4age conversion, but i was thinking about putting a turbo on the stock 4k-c motor. turbo would not be bigger than a T25g so boost wil be max of 10-15psi, but i wont have intercooler so like more around 5-7psi. has anyone done or know somebody that has done this? also i was thinking to myself, cus the intake and exhaust manifold are on the same side, the turbo would have to sit a little low. is there anyway or any brand of side draught carbies i can get so i can sit the turbo a little higher? another thing that came to my mind was that maybe the 20 yr old engine can't handle a bit of boost, like head gasket might blow? I'm n…

    • 219 replies
    • 560.1k views
  2. TEDDY'S NOOB GUIDE NO #0052 4AGE into RWD KE70 / AE71 / *E7* Conversion Notes Hey All. There's not a day that goes by, when someone ask's *How do i put a 4age into an *e7* ! Basically, i keep pm'ing people about it and kindly showing them where to go, but its getting a bit rediculious. So, here i present to you all the links i know off, that can help you out with your conversion. Its almost a copy from the same thing i made at rollaclub, but more things have poped up since. So, its a revised list as such. Please read it, because there is **alot** of data in there. Basically from now on, any topics *how do i install a 4age into my.. etc* will be trash…

    • 38 replies
    • 786.8k views
  3. Started by LittleRedSpirit,

    Engine/cooling/mounting and clutch Parts required 4age 20v engine filter socks yager motorsport front thermostat fitting modified rear cooling plate side water blockoff plate aftermarket engine computer dizzy cover AE86/71 clutch master cylinder AE71 manual pedal assembly if you have a ke70 Slave cylinder to suit the gearbox either jdm or adm 4age flywheel, 200mm or 212mm Clutch to suit, yes you can use the ae101 or ae111 clutch with 212mm flywheel rwd exhaust manifold/extractors coil and igniter, for wasted spark and custom leads or 1zzfe cop setup with inbuilt igniters AE86/AE71 engine mounts - steel and rubber sections. AE86/71 …

    • 37 replies
    • 275k views
  4. I thought I'd write this for the guys just joining and full of enthusiasm to build a fully sik drifta. Hopefully some of the members who have completed projects (and some who haven't) will add their wisdom. First- Decide on how much time you are realistically going to spend on the project, which means listing what you are going to give up to do it. We spent two nights every week and every Saturday working on the rally car when I was in South Africa for a decade, and that over-rode almost anything else. Without that sort of discipline it will be too easy to give up when you hit a hard part. Then- make a list of what you want the car to do. Drifting, track-work, …

      • Like
      • Upvote
    • 25 replies
    • 168.3k views
  5. Hey all, i put this up on ae86dc but thought i'd chuck it up here if there was any interest. I recently had some success with my 4age conversion into my ke70 in that i was able to get it made "legal" without engineering. Long story short, applied through regency, they said alright, got car inspected, and they're in the process of issuing a "certificate of exemption" for me. Not sure how many people will be interested in this, but can't hurt i guess!

    • 11 replies
    • 51.3k views
  6. Started by LittleRedSpirit,

    Hello. As some people know, I've been interested for a long time in fitting a 2azfe to an ae71 or ae86. It's something I've given a lot of thought to, but now I've made some progress and would like to use this as a place to collect my thoughts/information that I learn along the way so I don't forget what I did or how I did it. So far I've collected a lot of what I should need. I have: 2azfe 2azfe clutch, flywheel, inlet, tb, loom, coils, alternator, starter, exhaust manifold/cat, and fwd transfer case. 2azfe lightweight pulley kit. 2azfe inlet manifold flange from ross machine racing. Various starters to suit rwd config. Y and S bellhousings to suit …

  7. well hi every one I'm new on here tho ive been lurking a long time been reading and researching alot of info ,when i say alot i mean hours in front of the dam pc trying to sorce real info and how tos etc,come across alot of useful stuff and alot of helpful people willing to share there knoledge with me, so now that ive sust out alot of things that i never knew before i can now begin my build, PROJECT:::::::::: NISSAN SR20DET ENGINE INTO KE55 COROLLA TIME LIMIT:::::::: ITS DONE WHEN ITS DONE BUDGET:::::::::::::: I'm BROKE LOL so yeah i thought id share with you guys my build as a few of you have been nice enough to give me advices and help w…

  8. Started by drift freak,

    Hi guys, Thought it was about time I started a thread detailing my build project. I bought the car back at the start of the year off e-bay. I bought it without inspecting it so was pretty happy to find it in reasonable condition. So i got it home and started with my research as to what i could fit in the engine bay. I originally thought i'd go with a 4agte but after some research found the 4a road had been travelled many times over. So I've got a mate that had just bought a KE20 to make into a race car and he was talking about these 'mythical' Altezza beams engines...... HMMMMM my ears pricked up with the 210hp stock 6 speed manual. So off to the importers to pick up a f…

      • Like
      • Downvote
      • Upvote
    • 373 replies
    • 777.7k views
  9. Started by Tough_little_ke20,

    My latest project, ke30 powered by a 3sgte with a 5speed supra box, vs commodore diff and vs front struts with coil overs all around, full cage, fuel cell and a full paint job

      • Upvote
    • 302 replies
    • 610.8k views
  10. Started by onnpsi,

    hey guys I'm new here just thort i would post my new car thats underway its a 1974ke20 that I'm fitting my rb30t too it was in my old vlturbo onnpsi ok list to motor fresh rb30 rajab spec head cam and cam gear rajab plenam to4z on new steampipe manifold was low mounted in vl 44mm wastegate 770cc injectors in vl now 1600cc for e85 2x 044 pumps and surge tank microtech lt10 big frontmount and keas full manual jatco with transbreak all this made 305rwks on 22psi on pump 98 in vlturbo but in the ke20 ill be running e85 and more boost ill get pics up soon when motor goes in and this car will be wearing my plates onnpsi here is a pic of motor …

      • Upvote
    • 229 replies
    • 326.1k views
  11. Started by olskool,

    Alrighty then. AGES back I mentioned that I was going to begin a 4age conversion to my KE55. Well I have actually started the conversion. And believe it or not I have been pulling my hair out every night that I go to sleep. So many things to think about. Any way here is list of what I have got so far. Pintara diff with 4.11 gears adn disc brakes. I have already ground back all of the link brackets and coil seats. 4AGE of course, port and polished head, adj. cam gears. Custom bell housing to suit a celica 5 speed box Engine mounts from a ford laser. Making cus…

    • 213 replies
    • 295.6k views
  12. Started by Davros El Davros,

    00 - INTRO: Ok, before this begins, I understand that there is an absolute shite-load of information out there on the good old 4AGE engine conversion and RWD setup for FWD drive cars, so this is not intending to re-invent the wheel so to speak. This is going to be a documentation of the process we are about to undertake to put a 100kw 4AGE and a T50 5 speed box into my KE10. In the last few months I have been doing a tonne of reading and research into the conversion, and have compiled a fair amount of info. I have found many how-to guides that have been absolutely invaluable, but have had trouble finding something specific to a KE10, other than some really old po…

    • 195 replies
    • 480.7k views
  13. Started by pozman,

    hi people, i have resently come into contact with a very cheap ca18de with a box :faq: , that ill either be puting in my or my mates ke55. i have a rebuilt celica box in my car and apartently i can use tis so that the shifter comes thru the original hole, so does anyone know of a good engineer in melbourne and a good shop to get an adapter plate made for the celica box. also will the brakes need to be upgraded, i know its a good idea too and will be one day but wondering if a have too any help would also be very welcome, ( please help i'm not sure whether to put it mine or my mates) paul :D

    • 178 replies
    • 118.2k views
  14. Hi all , here are some pics of my FJ20 turbo conversion into my KE30 sedan .

    • 130 replies
    • 149.9k views
  15. Started by Alvarado.e09,

    Hey guys I'm new to the AE World and have a lot of questions and need help. I found a SR5 Corolla Hatch for a really good price here in town thank GOD :) Someone is selling a 4AGE FWD out of AE92 and GTS Bell-housing. I have looked online and found some stuff and most people say its a pretty easy swap but that isn't enough for me i want to know everything. I was looking at the FWD 4AGE the Distributor is on the Rear of the engine. Do i need to make room for this on the firewall or will it fit? Loom and ECU I have no idea. I was reading and seen that I need a complete GTS wire harness and fuse box and Dash Cluster? NOT SURE. I know i need to Re-p…

  16. Started by Savage,

    Hey guys and gals, I'm sure everybody here has an idea about what they want to do to there rolla, I'm kinda in the same category although I'm a little stumped. :D i want to do something original with my ke70 in the way of engine conversions. does anybody have any ideas on what might be cool to try? thanks in advance, later. ;)

    • 122 replies
    • 132.9k views
  17. Started by johnny t,

    hey this is my build progress on my ke30 project UPDATED 7-12-2014 so many more pics of the new look on page 8 :) Engine: forged and built SR20DET (s13)Turbo: Garret T3071r , HKS step 1 cams 256, rocker arm stoppers steam pipe top mount manifold, custom radiator with thermo and custom intercooler all alloy piping, turbosmart external wastegate (plumbed back) Fuel: (changing fuel pump soon) nismo 740cc injectors 8mm fuel lines Computer: AEM Exhaust: 2 1/2 inch pipe into highflow cat and into a highflow muffler with dump tip Diff & rear brakes & suspension : Hilux LSD 4.11 ratio with 285mm el falcon disc set up. with s13 rear calipers custom ta…

    • 120 replies
    • 225.3k views
  18. Started by Tiger,

    OK, after all the engine conversion talk, I thought to myself, these are both tough units and are capable of producing some immense amount of power behind the wheel... so what's your choice? SR20DET? or the IG-GTE? Your votes and comments please. My personal vote is for the 1G-GTE. Why? BLKJET got one of these motors and worked the absolute daylights out of it, took both turbos off and threw on a single hybrid turbo and is producing over 500BHP at the wheels! DEFINITELY a tough cookie to try and beat!

    • 116 replies
    • 107.5k views
  19. Started by 308_rolla,

    hey guys i was just asking on anyones opinion on putting a 308 black motor in a corrola Ke70.me and my dad are making it up to be a race car were half way thourgh the process,with rollbars installed, celica front and rear end, plus 308 is half installed. just askin for somones opinion thank

    • 102 replies
    • 107.2k views
  20. Started by oh what a nissan feeling!,

    hey, ive just scanned a few photos of my sr20 rolla as it was being built, so can u guys tell us how ta put them here? :y:

    • 102 replies
    • 79.6k views
  21. Started by justatoy,

    Hey all i need some help i want some more power without the whole conversion bit so I'm thinking of a 5k but can i just bolt it in to my ke55 crolla coupe is the 5k bigger than the 4k?????? if anyone has engine specs on a 5k could you plz post them

  22. now befor all you old people start telling me to read the FAQ, :D shut up cos i carn recite the dam thing. Now as much as i know the K block sits on a 30 degree angel, as for using the stock gearbox it would be possible to just weld up a hollow 30 degree box and run a bolt through that to mount it to the cross member and over fill the gear box oil through the top of the gear stick (take it off and fill with oil than bolt back on). as for the engine mounts, just cut off the short one and use another drivers side mount and add a little extra steel. if the engine sits too high than instead of raising 1 side, drop the other, will have to burn that bridge when i cross…

    • 92 replies
    • 117.9k views
  23. Started by thomo,

    every one keeps asking about mounts to stuff the 4age into the ke's, if i built mounts to sit a 4a onto ke eng mounts so that they fit everything from a ke10 to a ke70 would they sell/do you want to buy them? I'm even thinking of selling them engineered but thats going to be a pain depending on what state you live in o'yea, how much do you want to pay?

    • 91 replies
    • 71.4k views
  24. Started by madrolla68,

    Ok here the dilemma,i advertised my 5Kmotor and carbies,someone is keen as for it but NOW i am having second thoughts about selling it cause everwhere i read people are saying that it is too much work to fit the 7K in. Can someone tell me what the go is.

  25. Started by madtoy308,

    hey guys,started a new project..ke 20 with gen 3 v8.. just in middle of fitting engine and havnt thought of what gearbox to use.has to be strong!!!! also after two turbos,rated bout 200+hp each...any help would be great!

    • 87 replies
    • 109.2k views
  26. Started by 4k-t,

    Hey everyone, I have owned KE70's for over 3 years now. I think it is about time I put up what I'm doing. I have gotten So much useful info off of this site and would like to give back. Abit about me, my name is Keith. I have played with cars since I was tall enough to look over the guard to see what my old man was doing. Straight out of school I started a mechanics apprentership which I got 3 years though and lost my lisence. Typical I know but it happened and I have learnt from it. FYI I lost it in a stock KE70 haha high powered pfft! Started out as a Nissan fan boy and then I was bitten by the rota bug and still own my FC today. It was the FC the drove me to th…

      • Upvote
    • 78 replies
    • 363.9k views
  27. Started by Clown,

    I've been thinking lately what engine I'm goin to use in the corolla after talking to a mate about it. Its not really something i want to do but for costs the CA conversion doesnt' look so bad. Bang for buck the ca seems to win, allready turbo, cheap engine. the Gze being toyota engine is bulletproof though which would prob save me money in the long run. Whats everyones thoughts on, ease of conversion, costs, fab, engineeering etc. Cheers guys! :ban:

    • 76 replies
    • 99.8k views
  28. Started by 78_rolla,

    Hi, Just wondering if you would be able to put a sr20det into a 1978 Toyota Corolla (KE55)??? If so, do you know of anyone who's done it? Ta!

    • 73 replies
    • 81.3k views
  29. Started by OniBerserker,

    Hey what up? I'm back again... I decided from reading that thing about 7k engines that I really want one of those motors! I was planning to drop in a efi engine so I can buy a dry nos kit, which only injects nos at wide open throttle which should be interesting. i'll have to drop the compression of the motor but apart from that, the efi stuff, the gearbox and diff what else will i need to do the swap? brakes and coilovers will be ra60 celica parts oh yeah, what efi parts do I need cause i don't know anything about efi i plan on drifting it, so the nos will only be hooked up on track days any ideas

    • 72 replies
    • 69.3k views
  30. just got this started on the weekend thought i'd show you guys a few happy snaps excuse the mess like i said i just started it

      • Upvote
    • 72 replies
    • 260.2k views
  31. Started by Locky.,

    Hi guys, I'm fairly new here. I am soon to begin a CA18DET conversion to My KE70 and every night I have been on all the toyota forums searching for hints and tips on how people have done the conversion but, I haven't found one thread that was very helpful. So I thought I would start a thread here where all the questions can be asked and hopefully only correct, helpful answers are given. I know that there are redily available fitting kits on the market and it's not the installation I am interested in.. that's the easy part! What I would like to know is: - what radiator have people used and what mods were required (if any) - how the loom was adapted - what was…

      • Upvote
    • 70 replies
    • 121.9k views
  32. Started by ROLLLA,

    Hi all, I'm just new to this forum and have been playin around with a few ke55's and I'm interested in goin for a VN V6 conversion in mine. I was just wondering if anyone has tackled it here and if so could u guys share with me the pros and cons of the conversion. thanks

    • 67 replies
    • 78k views
  33. Started by SLW42,

    Hi guys, i know the general answer to this question is it's an engine conversion it's gonna cost money, i'm aware of this but what i'm trying to ask would it be more cost worthwhile to just add boost to a 3/4k or 5k, or drop the ca18det into the car, re wire the harness? Make a gearbox crossmember up, custom tailshaft and make a fuel system up, or just put a 5speed in behind the boosted motor? And spend the money on custom manifold for the turbo and get an exhaust made up?

    • 66 replies
    • 66.6k views
  34. Started by fourwheeldemon,

    hey guys I'm in need of some assistance as I'm buildnig a turbo setup for my 4k ke70 the idea so far is to use... -mitsibishi turbo -blitz external gate -350 holley -3k bigport head (with a full port job on it) -turbo grind on the cam -front mount -carter fuel pump -bosh coil -5k dizzy -oringed block -plus more but i feel that the pistons wont last long so i have to choices 1. use 4k dished piston... do u have any, i can't find any? lol 2. use turbo chrade pistons... how easy is this to do? what needs to be done? will they bolt up to the stock rods, etc? thanks guys from pat p.s. any help will be usefull

    • 64 replies
    • 96.5k views
  35. Started by Brendo,

    hey guys i got a 1980 TE-72 T-18, its a pure pig but with stock engine. don't really wanna spend dollars on the engine, i want ROTOR! anyone had anything to do with a similar/same conversion? input would be great guys.......... cheers Brendan :(

    • 63 replies
    • 73.7k views
  36. Started by Lukey,

    hey guys and galz i got my ke35 a wile a go and have now finished my paint job. I have cut out my rust all of it bogged it all up my self and my uncle and i painted it its my first car and i wanted to go out and then thought well its just a corolla.......... the only thing i need to do now is to put the 4spd manual in and take that god forsaken auto out. The Only thing bad about the interior is the back seat is ripped every thing else is 'crazy good' it has a fully sick 3k and fairly cool rims. anyway PICCYS when i got it, it looked clean but then i found rust

    • 59 replies
    • 76.9k views
  37. Started by Pete-ke20,

    This is a rough guide to my project so far! Ok, so I wanted to do something different, and I have always wanted to have a gsr lancer or vr4 galant as they are fairly quick but having not much cash and wanting to work on the car myself I decided to put a 4g93t engine like that out of the gsr lancer into my ke20. I also chose to do this as it appeared to be just as much F*#king about to do the 4age conversion and that the 4age would be more expensive due to every man and his dog doing it and only soo many parts about. The engine is a 1.8 litre DOHC 16v engine, which is a Japanese block (very important when it come to bell housing and box selection). I used this engi…

    • 59 replies
    • 130.4k views
  38. Started by Medicine_Man,

    Well the discussion came up on the old corollas yahoo group apparently, Thought I'd share my knowledge of how I went about adapting the Gemini (Nikki) carby to my 4K engine. The only thing preventing a Gemini carby from bolting straight on, is the fact that it sits too low and the throttle linkage will jam against the intake manifold. The way to modify it to fit is to acquire an extra base gasket to step the carby up a bit higher. You then have to shave a piece off the throttle arm, where it will hit the intake manifold. By doing this you also need longer studs to mount the carby to the intake manifold as the stock studs are too short to get the bolt on. You then have…

    • 58 replies
    • 127.5k views
  39. Started by dougyboy,

    just wonting to know a few things as a few of yous wood already know i have a 4age big port 16 valve out of a ae82, had been converted and fitted in to my ae71 few years ago i got the car a mess. Anyways i have picked up TWIN MM Weber's ( REBUILT PROFESSIONALLY ) & 4AGE Big port Manifold with linkages and air cleaners. Weber's were rebuilt by previous owner jetted for Datsun 1600cc engine and only run for a sort time before car was re ended. Manifold is brand new. i have allso ordered a 6al 2 msd box i have a gt40 coil but will get a new msd coil,leads to sute the new set up,looking at a start retard box allso, but just wait and see 1st. now do i or can i lock …

      • Upvote
    • 58 replies
    • 311.9k views
  40. Started by Lukey,

    Hi all I'm thinking about putting a 7k into my ke35 coupe. My coupe at the moment has a 3k-c with a ke70's 5 speed and a stock diff. My main questions are- 1) If i am going to have upgrade my gearbox and diff 2) Are there any major upgrades needed 3) And i have herd that it should bolt straight in but i may have to change the sump to a 5k sump is this true Thanks heaps Luke :hmm:

    • 55 replies
    • 30.9k views

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.